• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.3
• /
• pp.87-93
• /
• 2008

The large scale shaker can be employed to measure linear and nonlinear shear moduli of soils in situ as a function of shear strain. The method involves applying dynamic loads on a surface foundation measuring the dynamic response of the soil mass beneath the foundation with embedded instrumentation. This paper focuses on the development of a framework of the inverse analysis for the interpretation of test data to estimate linear and nonlinear shear moduli of soils along with the necessity of the inverse analysis. The suggested framework is based on the nonlinear least squares but it uses two iterative loops to account for the nonlinear behavior of soil that sensors are not located. The validity of the suggested inversion framework is tested through a series of numerical parametric studies. An example use of the suggested inversion framework is also shown. Because the field condition may affect the accuracy of suggested method, it is important to conduct a preliminary inverse analysis to quantify the discrepancy between the estimated modulus and the baseline.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.18 no.1
• /
• pp.1-12
• /
• 2015

Beginning of the human ecology in 1920s, the efforts for applying the environmental values to a policy have been embodied by the enactments of international agreement and relevant laws. The government has been struggling to adopt the environmental values for the policy by enacting the relevant laws and establishing the environmental value evaluation information (environmental conservation value assessment map, eco-natural map, biotope map). In spite of the efforts to apply the environmental value assessment information for the habitat potential of wildlife, the application is being challenged by the discrepancy in methods and criteria. Thus this study intends to measure the potential of wildlife habitat and apply it to the spatial value classification for the application plan of wildlife habitat potential in policy. Maxent was used for the habitat potential and the land types were classified depending on the surface and land use pattern of cadastral map. As a result, the policy matrix including conservation strategy(CS), restoration strategy(RS), practical use strategy(PS) and development strategy(DS) has been deduced as CS $13.05km^2$(2.38%), RS $1.64km^2$(0.30%), PS $162.42km^2$(29.57%) and DS $8.56km^2$(1.56%). CS was emerged mostly on forest valleys and farmlands, and RS was appeared in the road area near the conservation strategy areas. Boryung downtown and Daecheon Beach were the center of DS, while the forest and farmlands were presented as PS. It is significant that this study suggest the new approaching method by comparing the wildlife habitat potential with the land type. Since this study evaluated the environmental value by one species of leopard cat (Prionailurusbengalensis) with Maxent model, it is necessary to apply the habitat potential measuring method for various target species as further research.

• Journal of the Korean Society of Food Culture
• /
• v.23 no.2
• /
• pp.152-162
• /
• 2008

The objectives of this study were to: a) examine foreign customers’ satisfaction and expectations for the food and service attributes of Korean restaurants located in the U.S., b) measure the gap between the satisfaction and expectations for food and service attributes, c) analyze through IPA analysis the crucial attributes needing improvement in order to minimize the discrepancy between customers’ expectations and performance, and d) analyze the effects of factors related to the food and service attributes on overall customer satisfaction in regard to Korean restaurant selection. A total of 255 American customers who had visited four Korean restaurants located within metropolitan and rural areas of the U.S. were surveyed for this study. Statistical analyses, including t-tests, factor analysis, and multiple regression, were performed using the SPSS statistical package (12.0). The American customers’ overall satisfaction of the food and services offered by the Korean restaurants was relatively high, with the exception of tangible service attributes such as comfortable chairs, restroom cleanliness, and restaurant interior. The urban foreign customers, however, were dissatisfied with the use of healthful ingredients in Korean food, because their expectation level toward this aspect exceeded their satisfaction level. In terms of Korean restaurant selection, tangible services related to the restaurant facilities were identified as the critical factor having an effect on American customer satisfaction.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.10
• /
• pp.173-182
• /
• 2013

Typographical mistakes made in the writing process of drafts of electronic documents are more common than any other type of errors. The majority of these errors caused by mistyping are regarded as consequently still typo-errors, but a considerable number of them are developed into the grammatical errors and the semantic errors. Pseudo semantic errors among these errors due to typographical errors have more noticeable peculiarities than pure semantic errors between senses of surrounding context words within a sentence. These semantic errors can be detected and corrected by simple algorithm based on the co-occurrence frequency because of their prominent contextual discrepancy. I propose a method for detection and correction based on the co-occurrence frequency in order to detect semantic errors due to typo-errors. The co-occurrence frequency in proposed method is counted for only words with immediate dependency relation, and the cosine similarity measure is used in order to detect pseudo semantic errors. From the presented experimental results, the proposed method is expected to help improve the detecting rate of overall proofreading system by about 2~3%.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.3
• /
• pp.259-266
• /
• 2007

The parameters of electric acoustic characteristic used as standards to evaluate the performance of a small microphone are composed of sensitivity, harmonic distortion, frequency response, directivity and others. Such characteristic parameters should be designed differently depending on a purpose, so it is important to verify whether a small microphone was made appropriately for the purpose after measuring the acoustic characteristics. Therefore, a system that can measure the acoustic characteristic parameters of a small microphone using DSP, not only simultaneously but also in real-time, was implemented in this paper. To verify the implemented system, four kinds of microphones were measured and the results were compared with the data values of the acoustic characteristics of each microphone. There were a little discrepancy between them because the conditions when measuring the characteristics were not identical. But it was verified that the errors are within the error tolerance and it proved that the system can be used in place of the conventional equipment used in measuring the acoustic characteristics of small microphones.

• Restorative Dentistry and Endodontics
• /
• v.49 no.1
• /
• pp.7.1-7.11
• /
• 2024

Objectives: This study aimed to evaluate the impact of substrate color and interface distance on the color adjustment of 2 single-shade composites, Vittra APS Unique and Charisma Diamond One. Materials and Methods: Dual disc-shaped specimens were created using Vittra APS Unique or Charisma Diamond One as the center composite, surrounded by shaded composites (A1 or A3). Color measurements were taken with a spectrophotometer against a gray background, recording the color coordinates in the CIELAB color space. Illumination with a light-correcting device and image acquisition using a polarizing filter-equipped cell phone were performed on specimens over the same background. Image processing software was used to measure the color coordinates in the center and periphery of the inner composite and in the outer composite. The color data were then converted to CIELAB coordinates and adjusted using data from the spectrophotometer. Color differences (ΔE₀₀) between the center/periphery of single-shade and outer composites were calculated, along with color changes in single-shade composites caused by different outer composites. Color differences for the inner composites surrounded by A1 and A3 were also calculated. Data were analyzed using repeated-measures analysis of variance (α = 0.05). Results: The results showed that color discrepancies were lowest near the interface and when the outer composite was whiter (A1). Additionally, Charisma Diamond One exhibited better color adjustment ability than Vittra APS Unique. Conclusions: Color discrepancies between the investigated single-shade composites diminished towards the interface with the surrounding composite, particularly when the latter exhibited a lighter shade.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.420-423
• /
• 2015

This paper proposes a method of non-linearity error detection and calibration for binary-weighted charge-driven DACs. In general, the non-linearity errors of DACs often occur due to the mismatch of layout designs or process variation, even when careful layout design methods and process calibration are adopted. Since such errors can substantially degrade the SNDR performance of DAC, it is crucial to accurately measure the errors and calibrate the design mismatches. The proposed method employs 2 identical DAC circuits. The 2 DACs are sweeped, respectively, by using 2 digital input counters with a fixed difference. A comparator identifies any non-linearity errors larger than an acceptable discrepancy. We also propose a calibration method that can fine-tune the DAC's capacitor sizes iteratively until the comparator finds no further errors. Simulations are presented, which show that the proposed method is effective to detect the non-linearity errors and calibrate the capacitor mismatches of a 12-bit DAC design of binary-weighted charge-driven structure.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.2
• /
• pp.34-41
• /
• 2021

A commercial HVOF torch (originally designed for coating applications) has been modified as a high temperature flow source for material testing. In this study, a water cooled commercial Gardon gauge was used to measure heat fluxes at four locations away from the nozzle exit. The cooling water temperature data were used to calculate calorimetric heat fluxes at the same locations. The heat fluxes from both methods were compared and the calorimetric heat fluxes were found to be many times higher than the Gardon gauge heat fluxes. A hypothesis is applied to the calorimetric method to understand the discrepancy seen between the methods. The Gardon gauge heat fluxes are seen to be in the range of the hypothesized calorimetric calculations. This can be considered as a considerable validation for the hypothesis, but further refinement needed using appropriate numerical models.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.6
• /
• pp.519-527
• /
• 2019

Purpose: To evaluate the treatment result in polyostotic fibrous dysplasia classified according to the involvement of the femoral head. Materials and Methods: Twenty-three patients from March 1987 to March 2014 were reviewed retrospectively. Patients with no involvement of the physeal scar in the femoral head were classified as Type I, and those with involvement of the physeal scar were classified as Type II. A plain radiograph was used to measure the femoral neck shaft angle, articulo-trochanteric distance (ATD), and anterior bowing through the lateral view. A teleoroentgenogram of the lower limb was used to measure the leg length discrepancy and lower extremity mechanical axis. The pre- and postoperative femoral neck-shaft angle and ATD were compared to assess the degree of correction of the deformity. Results: Among a total of 46 cases (23 patients), 28 cases (23 patients) had lesions in the proximal femur. Type I were 16/28 cases (15/23 patients) and Type II were 12/28 cases (9/23 patients). The preoperative proximal femoral neck-shaft angle was 116.8° in Type I and 95.3° in Type II. The ATD was 12.08 mm in Type I and -5.54 mm in Type II. The deformity correction showed significant improvement immediately after surgery, the deformity correction was lost in Type II (neck shaft angle Type I: 133.8°-130.8°, Type II: 128.6°-116.9°, and ATD Type I: 17.66-15.72 mm, Type II: 7.44-4.16 mm). The extent of anterior bowing was 12.74° in Type I and 20.19° in Type II. The mean differences of 12 mm between the 9 patients who showed a leg length discrepancy and the lower extremity mechanical axis showed 4 cases of lateral deviation and 7 cases of medial deviation. Conclusion: In polyostotic fibrous dysplasia, when the femur head is involved, the femur neck shaft angle, ATD, and anterior bowing of the femur had more deformity, and the postoperative correction of deformity was lost, suggesting that the involvement of the femoral head was an important factor in the prognosis of the disease.

• Progress in Medical Physics
• /
• v.34 no.1
• /
• pp.1-9
• /
• 2023

Purpose: Although ionization chambers are widely used to measure beam commissioning data, point-by-point measurements of all the profiles with various field size and depths are time-consuming tasks. As an alternative, we investigated the feasibility of a linear diode array for commissioning a treatment planning system. Methods: The beam data of a Varian TrueBeam^® radiotherapy system at 6 and 10 MV with/without a flattening filter were measured for commissioning of an Eclipse Analytical Anisotropic Algorithm (AAA) ver.15.6. All of the necessary beam data were measured using an IBA CC13 ionization chamber and validated against Varian "Golden Beam" data. After validation, the measured CC13 profiles were used for commissioning the Eclipse AAA (AAA_CC13). In addition, an IBA LDA-99SC linear diode array detector was used to measure all of the beam profiles and for commissioning a separate model (AAA_LDA99). Finally, the AAA_CC13 and AAA_LDA99 dose calculations for each of the 10 clinical plans were compared. Results: The agreement of the CC13 profiles with the Varian Golden Beam data was confirmed within 1% except in the penumbral region, where ≤2% of a discrepancy related to machine-specific jaw calibration was observed. Since the volume was larger for the CC13 chamber than for the LDA-99SC chamber, the penumbra widths were larger in the CC13 profiles, resulting in ≤5% differences. However, after beam modeling, the penumbral widths agreed within 0.1 mm. Finally the AAA_LDA99 and AAA_CC13 dose distributions agreed within 1% for all voxels inside the body for the 10 clinical plans. Conclusions: In conclusion, the LDA-99SC diode array detector was found to be accurate and efficient for measuring photon beam profiles to commission treatment planning systems.