• Journal of Internet Computing and Services
• /
• v.9 no.5
• /
• pp.185-193
• /
• 2008

An MTBF(mean time between failures) of large scale parallel systems is known to be only an order of several hours, and large computations sometimes result in a waste of huge amount of CPU time, However. the MPI(Message Passing Interface), a de facto standard for message passing parallel programming, suggests no possibility to handle such a problem. In this paper, we propose an application-level fault tolerant computation system, purely on the basis of the current MPI standard without using any non-standard fault tolerant MPI library, that can be used for general scientific synchronous parallel computation.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.261-265
• /
• 2019

We analyze the failure rate change of a conventional bidirectional converter and a modified one which moves an output capacitor towards propulsion battery. We analysis of the circuit structural homogeneity and the difference between both converters, and confirm that the capacitor working voltage is reduced by changing the capacitor position. After obtaining the capacitor failure rate according to voltage stress factor and operating temperature, it is applied to the fault-tree of the bidirectional converter to obtain the overall failure rate of the converter. We analyzes the advantages and disadvantages of design changes by comparing and analyzing the failure rate and mean time between failures (MTBF) according to operating temperature and capacitance value.

• International Journal of Reliability and Applications
• /
• v.5 no.2
• /
• pp.81-103
• /
• 2004

Improvements of a bridge network system are studied in this paper. Then equivalence between different improved designs of the bridge network system is discussed. Three different methods are used to get different better designs of the network in the sense of having higher reliability and mean time to failure. Then two different types of reliability equivalence factors of the system are derived. It is assumed here that the failure rates of the system's components are identical and constant. The reliability functions and mean time to failure of the original and improved designs of the network are derived. Comparison between the mean time to failures of the original system and improved designs of the system are presented. Numerical studies and conclusion are presented in order to explain how one can apply the the theoretical results obtained.

• Journal of Biosystems Engineering
• /
• v.11 no.1
• /
• pp.76-85
• /
• 1986

This study was intended to examine the failure characteristics and breakdowns of the head-fed type combines generally used on farms. The failure distribution was assumed to follow Weibull distribution function and the Weibull parameters of the major parts, units and combine as whole were estimated by using the data collected in a survey. A computer program for the estimation of the Weibull parameter was developed. Monte Carlo method was used in predicting the time between failures. The results of study may be summarized as follows: 1. The number of failures per combine was 4.83 times per year and 0.3 times per hectare of combines of different ages. 2. According to the Kolmogorov-Smirnov test method, it was proved that the Weibull distribution function is well fitted to the characteristics of the failure and breakdowns of combines. 3. Weibull parameters of failure distribution of the combine as a whole were estimated to give the shape parameter ${\beta}$=1.3089 and the scale parameter ${\alpha}$=105.2409. The combining area with 80% reliability was 1.1 ha, and the probability of operating the combine without any failure for a year, was $2.76{\times}10^{-4}$. 4. The mean time between failures (MTBF) of the combines was predicted to be 3.2 ha of operation, which corresponds to 32 hours of operation.

• Journal of the Korean Data and Information Science Society
• /
• v.18 no.2
• /
• pp.535-541
• /
• 2007

The Non-homogeneous Poisson process is probably the most popular model since it can model systems that are deteriorating or improving. The renewal process is a model that is often used to describe the random occurrence of events in time. But both these models are based on too restrictive assumptions on the effect of the repair action. The Modulated Power Law Process is a suitable model for describing the failure pattern of repairable systems when both renewal-type behavior and time trend are present. In this paper we propose maximum likelihood estimation of the next failure time after the system has experienced some failures, that is, Mean Time Between Failure for the MPLP model.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.17 no.3
• /
• pp.181-193
• /
• 1992

This paper shows the model of a consecutive-k-out-of-n :G system with common-cause outages. The objective is to analytically derive the mean operating time between failures for a non-repairable component system. The average failure time of a system and the system availability are also considered. Then, the model is extended to a system with repairable components and unrestricted repair, in which service times are exponentially distributed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.29 no.2
• /
• pp.195-209
• /
• 1991

When the porcelain fused to metal restorations were fractured at the metal interface, various techniques and materials for intraoral porcelain repair have been suggested. The purpose of this study was to investigate the effect of metal surface treatment method and water storage on the shear bond strength of four porcelain repair systems. : Clearfil(Kuraray), All-bond(Bisco), Superbond C & B(Sun Medical), Panavia OP(Kuraray). After the metal surfaces of the specimens were sandblasted by aluminum oxide or roughened by diamond point, they were stored in double deionized water(24 Hr., $37^{\circ}C$) and thermocycling was performed(24 Hr., 1024 cycles), and again half of specimes were stored in water bath(2 Months, $37^{\circ}C$). Mean shear bond strength and mode of failure were recorded. The results of this study were obtained as follows : 1. Differences were observed between the sandblasted and diamond - treated specimens in Clearfil, All-bond, and Superbond. No statistically significant differences were observed in Panavia. 2. The 2-month storage time significantly affected the bond strength of All-bond and Superbond. No statistically significant differences were observed in Clearfil and Panavia. 3. The failures were observed at the interface between opaque resin and the metal in Clearfil and All-bond. 4. The failures were observed at the interface between opaque resin and veneered resin in Panavia. The failures were observed at the interface between opaque resin and veneered resin in Superbond, but 40% of them were fractured at the interface between the metal and opaque resin after 2-month storage time.

• The Korean Journal of Applied Statistics
• /
• v.12 no.1
• /
• pp.203-211
• /
• 1999

수리 가능한 시스템의 평균고장간격시간에 대한 많은 연구들이 진행되어 왔으며, 그 대부분은 n번째 고장발생시각 $T_n$을 관측한 후 그 다음 고장이 발생할 때까지의 평균시간, 즉 E($T_{n+1}$-$T_n$$\mid$$T_n$ = $t_n$)에 관한 연구들이었다. 본 연구에서는 수리가능한 시스템의 고장이 와이블과정을 따라 일어날 경우, n번째와 n+1번째 고장간의 평균고장간격시간 E($T_{n+1}$-$T_n$)에 대한 불편추정량을 구하고 일치성 및 근사적 정규성을 증명하였다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.377-378
• /
• 2008

한전에서는 계통보호 설비의 신뢰도 확보를 위해 디지털 보호설비 사용을 확대하고 있으며, 이에 따른 합리적인 보호설비 교체기준을 설정하려고 한다. 본 논문에서는 디지털 보호계전기의 교체기준 설정을 위해 디지털 보호 계전기(Digital Distance Relay)와 구성모듈에 대한 고장률(Failure rate)과 평균수명(Mean Time between Failures, MTBF), 그리고 시간에 따른 신뢰도를 분석하였다. 수명예측방법은 MIL-HDBK-217F, Notice 2의 부품스트레스분석방법(Part Stress Analysis Method) 사용하였다.

• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.577-581
• /
• 2009

The fixed duration test has been widely used in the reliability demonstration test for rolling stocks. This article deals with how to design the test statistics, acceptance criteria and the fixed duration of the MTBF(Mean Time Between Failures) demonstration test considering the consumer risk. Numerical examples are given to illustrate the dependence of the consumer risk on the test duration and MTBF requirement.