• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.3731-3735
• /
• 2015

This study reports the relationship between rollingstock weight and acceleration performance for HEMU-430X, the first electric multiple unit developed in Korea. While maintaining the consumed power, the total train weight was deliberately varied by 2%, by adding and removing weights, and the it was shown that the lighter train was found to have higher acceleration performance and hence better suited for maximum speed tests below the speed of 413km/h. According to the power consumption analysis based on the velocity data collected per 0.1 second, the balanced speed, when the traction force and air resistance become equal, was determined to be 419km/h for HEMU-430X, which is in agreement with tested result. It is expected that the analyses in this study will be utilized for the speed tests in the future.

• The korean journal of orthodontics
• /
• v.38 no.5
• /
• pp.304-313
• /
• 2008

Objective: The purpose of this study was to evaluate the stress distribution in bone and displacement distribution of the miniscrew according to the length and number of the miniscrews used for the fixation of miniplate, and the direction of orthodontic force. Methods: Four types of finite element models were designed to show various lengths (6 mm, 4 mm) and number (3, 2) of 2 mm diameter miniscrew used for the fixation of six holes for a curvilinear miniplate. A traction force of 4 N was applied at $0^{\circ}$, $30^{\circ}$, $60^{\circ}$ and $90^{\circ}$ to an imaginary axis connecting the two most distal unfixed holes of the miniplate. Results: The smaller the number of the miniscrew and the shorter the length of the miniscrew, the more the maximum von Mises stress in the bone and maximum displacement of the miniscrew increased. Most von Mises stress in the bone was absorbed in the cortical portion rather than in the cancellous portion. The more the angle of the applied force to the imaginary axis increased, the more the maximum von Mises stress in the bone and maximum displacement of the miniscrew increased. The maximum von Mises stress in the bone and maximum displacement of the miniscrew were measured around the most distal screw-fixed area. Condusions: The results suggest that the miniplate system should be positioned in the rigid cortical bone with 3 miniscrews of 2 mm diameter and 6 mm length, and its imaginary axis placed as parallel as possible to the direction of orthodontic force to obtain good primary stability.

• Journal of Korean Academy of Nursing
• /
• v.14 no.2
• /
• pp.93-111
• /
• 1984

The main purpose of this study is to develop a ratio scale measuring level of pain using Korean pain terms. The specific purposes of this study are to identify the degree of pain of each pain term in each subclass: to classify each subclass in terms of dimensions of pain; and to analyze factors of the Korean pain ratio scale clustering together. One hundred an4 fifty eight pain terms which were originally identified as representative terms and their synonyms were used for data collection. Fifty eight nursing professors ana sixty one medical doctors who have contacted with patients having pain were asked to rate the weight of each pain term on a visual analogue scale. Subclasses in which ranks of pain terms were same f s findings in two previous studies were 1) thermal 3 am 2) cavity pressure, 3) single stimulating pain, 4) radiation pain. and 5) chemical pain. Subclasses in which ranks of pain terms were confused were 1) incisive pressure, and 2) cold pain. Subclasses in which one new pain term was added were 1) inflammatory-repeated pain, 2) punctuate pressure, 3) constrictive pressure, 4) fatigue-related pressure, and 5) suffering-relate4 pain. Subclasses in which two new pain terms were added were 1) traction pressure, 2) peripheral nerve pain, 3) dull pain, 4) pulsation-related pain, 5) digestion-related pain, 6) tract pain, and 7) punishment-related pain. Subclass in which 3 new pain terms were included was fear-related pain. Rating scores of 5 words in 4 subclasses were significantly different between the normal group and the extreme group of subjects in terms of subjective rating. Only one word among 6 words was that newly added to the scale. Rating scores of 12 words in 9 subclasses were significantly different between doctor group and nursing professor group. Among these 12 words, only 3 were those newly added to the scale. In comparison of these 12 words, mean scores of the nursing professors were always 7 to 16 points higher than those of the medical doctors. In the analysis of judgement of subjects in terms of dimensions of pain terms, subclasses of dull pain, cavity pressure, tract pain and cold pain were suggested to be included in the miscellaneous dimension. As a result of factor analysis of the ratings given to 96 pain words using principal components analysis without iteration and with varimax rotation limiting the number of factors to 4, factors of severe pain (factor I) mild-moderate pain (factor II) , causative pain (factor III) and temperature-related pain(factor IV) were extracted with the factor loading above 0.388. When the pain words were re-arranged on the bases of factor loading above 0.368, number of factors decreased to only first two factors. Maximum score of pain word in factor II was 46.17 and the minimum score of the factor I was 45.36. Further studies are needed to identify the validity, reliability, sensitivity and practicability of this ratio scale using patients having various sources of pain.

• Journal of Power Electronics
• /
• v.11 no.4
• /
• pp.408-417
• /
• 2011

The plug-in hybrid electric vehicles (PHEVs) are specialized hybrid electric vehicles that have the potential to obtain enough energy for average daily commuting from batteries. The PHEV battery would be recharged from the power grid at home or at work and would thus allow for a reduction in the overall fuel consumption. This paper proposes an integrated power electronics interface for PHEVs, which consists of a novel Eight-Switch Inverter (ESI) and an interleaved DC/DC converter, in order to reduce the cost, the mass and the size of the power electronics unit (PEU) with high performance at any operating mode. In the proposed configuration, a novel Eight-Switch Inverter (ESI) is able to function as a bidirectional single-phase AC/DC battery charger/ vehicle to grid (V2G) and to transfer electrical energy between the DC-link (connected to the battery) and the electric traction system as DC/AC inverter. In addition, a bidirectional-interleaved DC/DC converter with dual-loop controller is proposed for interfacing the ESI to a low-voltage battery pack in order to minimize the ripple of the battery current and to improve the efficiency of the DC system with lower inductor size. To validate the performance of the proposed configuration, the indirect field-oriented control (IFOC) based on particle swarm optimization (PSO) is proposed to optimize the efficiency of the AC drive system in PHEVs. The maximum efficiency of the motor is obtained by the evaluation of optimal rotor flux at any operating point, where the PSO is applied to evaluate the optimal flux. Moreover, an improved AC/DC controller based Proportional-Resonant Control (PRC) is proposed in order to reduce the THD of the input current in charger/V2G modes. The proposed configuration is analyzed and its performance is validated using simulated results obtained in MATLAB/ SIMULINK. Furthermore, it is experimentally validated with results obtained from the prototypes that have been developed and built in the laboratory based on TMS320F2808 DSP.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.5
• /
• pp.842-849
• /
• 1997

This study was designed to investigate the antioxidative activity of enzymatic hydrolysates prepared from defatted anchor muscle by various pretenses. In these hydrolysates, the hydrolysates derived from pepsin and Protamex showed the strongest antioxidative activity. Enzymatic hydrolysates also showed the synergistic effects on antioxidative activity of $\alpha-tocopherol$, and almost no change in butylated hydroxytoluene (BHT). Peroxidation of metal ions $(Fe^{3+},\;Cu^{2+})$ was inhibited by enzymatic hydrolysates. Ten fractions (P-1 to P-10) were fractionated from the peptic hydrolysates by Amberlite IR-120 and Bio-gel P-2 column chromatography. The maximum antioxidative activity was observed in the traction P-2 (fraction No. $26\~31$). In amino acid composition of before and after hydrolysis of defatted anchovy muscle and the active fractions (P-2), contents of aspartic arid and glutamic acid were increased, but alanine, cysteine, tyrosine and phenylalanine were decreased.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.6
• /
• pp.675-679
• /
• 2024

Wide bandgap (WBG) devices, especially SiC, are gaining traction as materials for high-power EV conversion devices due to their superior efficiency and switching capabilities compared to Si-based power devices. SiC allows for high power, high temperature, and high frequency applications because of its outstanding thermal conductivity, saturation velocity, and dielectric breakdown field. SiC-based MPS diodes combine the advantages of SiC-based SBDs and PiN diodes, allowing high-frequency switching operation with low leakage currents under high voltage conditions. However, MPS diodes exhibit snapback phenomena influenced by the P⁺ region's size, necessitating optimization. A TCAD simulation studied the impact of the P⁺ region's depth and width on MPS diode performance. Increasing the P⁺ width raised the On-specific resistance (R_on,sp) and lowered the maximum voltage during snapback (V_snap). Increasing the depth decreased both Breakdown voltage (BV) and V_snap. A trade-off between the semiconductor performance index BFOM and V_snap was identified, leading to optimized dimensions. The optimized MPS diode shows a low V_snap of about 3.89 V and a high BFOM of 1.72 GW·cm², highlighting its potential as a next-generation high-performance power conversion device.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.2
• /
• pp.259-266
• /
• 1998

A study on the biological and chemical characteristics in the middle last Sea of Korea was carried out at 31 stations in October $11\~18$, 1995 on board the R/V Tam-Yang. The chlorophyll a concentration, new and regenerated production, and the vertical diffusion of nitrate from the thermocline structure were investigated. From the vertical distribution of chlorophyll a, subsurface maxima were observed near the thermorline at most stations including the frontal zone, except at the southern stations where the maximum chloropyll a concentration occurred at the surface, The nanophytoplankton was the most dominant fraction comprising $83.5\%$ of total phytoplankton cell numbers, but netphytoplankton were common at the southern stations where the dominant species were Rhizosolenia sp. Nitrogenous new production and regenerated productions were measured using the stable isotope $^{15}N$ nitrate and ammonia uptake method. The vertically integrated nitrogen production varied between 8.470 and $72.945\;mg\;N\;m^{-2}\;d^{-1}$. The f-ratio, which is the traction of new production from primary production, waried between 0.03 and 0.72, indicating that $3\%$ to $72\%$ of primary production was supported by the input of nutrients from below the euphotic zone and the rest are supported by ammonia recycled within the euphotic layer. This range of f-ratio encompasses from extremely oligotrophic to eutrophic area characteristics. The differences in productivity and f-ratio among stations were related to frontal structure and the bottom topography. The values were high near the frontal zone and low outside of it, and the station near Ulleng Island showed the highest f-ratio. Vertical diffusion coefficients were calculated from both the water column stability (Kz-1) of King and Devol's equation (1979) and new nitrogen requirement (Kz-2). The values of Kz-2 ($0.11\~0.55\;cm^2/s$) were relatively low compared to the values reported previously.