• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.2
• /
• pp.87-95
• /
• 2017

The increase in the frequency of occurrence of abnormal weather could include severe rainfall, which could cause rice submergence during the ripening stage. This experiment was conducted to clarify the effects of submergence during the ripening period on yield and quality of rice. The flooding treatment was conducted at 7 and 14 days after heading. Flooding conditions were created with two conditions, flag leaf exposed and overhead flooding, and each condition was divided into two conditions according to water quality-clear and muddy. Although the yield decrease was more severe at 7 days after heading because of the decrease in the ripening ratio, the head rice ratio was more affected at 14 days after heading because of the increase in the chalky kernel ratio. The maximum quantum yield (Fv/Fm), which indicates the photosynthetic efficiency, did not differ before and after the flooding treatment until flooding continued for 4 days. In addition, stem elongation occurred because of flooding as an avoidance mechanism in japonica rice. This phenomenon was expected to decrease the supply of assimilation products to the spikelet (sink). Overall, it was suggested that additional experiments should be conducted examining the change in the starch synthesis mechanism and transfer of assimilate products resulting from submergence, for development of cultivation techniques corresponding to submergence and breeding of varieties with submergence tolerance characteristics.

• Journal of Animal Science and Technology
• /
• v.53 no.2
• /
• pp.89-97
• /
• 2011

In this study, the efficiency of microsatellite (MS) markers for pork quality was examined and further, their suitability to domestic pork industry also was verified, by measuring meat quality parameters of Berkshire breeds. A total of 323 pigs of Berkshire breeds were slaughtered and subjected to meat quality evaluation. In addition, the genomic DNAs from blood samples of slaughtered pigs were used for genotyping analysis of 50 MS markers. The results revealed that Berkshire breeds have excellent meat quality, compared with the popular domestic breeds such as Duroc, Yorkshire, and Landrace. Noticeably, the Berkshire breeds exhibited a significant post-mortem pH24hr ($5.88{\pm}0.01$) and fat content ($2.878{\pm}0.06$). Through the linkage analysis between MS markers, 14 MS markers showed significant association with meat quality traits (p<0.05). Maximum significant differences of 0.55 pH24hr value and 2.04% fat content were observed between the highest and lowest allele populations. If these 14 MS markers are applied to the pork quality diagnosis kit, the synergistic effect can be expected in meat quality parameters such as meat color, fat content, pH 24 hr, cooking loss, drip loss and water-holding capacity.

• The Journal of Korean Society for Radiation Therapy
• /
• v.16 no.1
• /
• pp.51-56
• /
• 2004

The aim of this study is to evaluate the effect of skin dose and PDD by using wounds protecting gauzes or Vaselinespread gauzes. And it was studied that the possibility to substitute custom bolus into gauzes. 4MV photon (CL600C, varian, US), Polystyrene Phantom (30(W) X30(L) X 30(H)) with Markus chamber(PTW, US) were used for dose measurement. This study was distinguished natural gauzes and spread over Vaseline gauzes. We gave variety to the gauze thickness at 5, 10 and 15 sheets respectively. For comparison between using bolus and not that, we had used 1.0 cm thickness bolus so that analyzed surface dose and PDD at the same conditions above mentioned. When maximum point was defined as reference point, surface dose was measured as $35\%$ in open beam. When the gauzes were attached to surface as 5, 10 and 15 sheets, surface dose were increased as 69, 80 and $91\%$ respectively according to thickness of gauzes. When spread over Vaseline gauzes were attached to surface as 5, 10 and 15 sheets, surface dose were increased respectively as 98, 100 and $98\%$ according to thickness of gauzes. Also when 0.5 cm bolus and 5 sheets gauzes were composed, surface dose was measured as $98\%$. The gauzes that were attached to skin surface in radiation therapy had been scattering material and contributed increasing surface dose without variation of percentage depth dose. However, if we want to delivery much dose to skin surface then we have to apply many sheets of gauzes to skin surface. Although we get easy that result by bolus or spread over Vaseline gauzes, we have to revise percentage depth dose at calculation. Therefore, if we find pertinent conditions based on measured data that are considered skin dose and patient setup efficiency, to replace custom bolus with gauzes will be helpful to efficient treatment.

• Journal of the Korea Concrete Institute
• /
• v.23 no.6
• /
• pp.711-722
• /
• 2011

Beam-column gravity or Intermediate Moment frames subjected to unexpected large displacements are vulnerable when no seismic details are provided, which is typical. Conversely, economic efficiency of those frames is decreased if unnecessary special detailing is applied as the beam and column size becomes quite large and steel congestion is caused by joint transverse reinforcement in beam-column connections. Moderate seismic design is used in Korea for beam-column connections of buildings with structural walls, which are to be destroyed when the unexpected large earthquake occurs. Nonetheless, performance of such beamcolumn connections may be substantially improved by the addition of steel fibers. This study was conducted to investigate the effect of steel fibers in reinforced concrete exterior beam-column connections and possibility for the replacement of some joint transverse reinforcement. Ten half-scale beam-column connections with non-seismic details were tested under cyclic loads with two cycles at each drift up to 19 cycles. Main test parameters used were the volume ratio of steel fibers (0%, 1%, 1.5%) and joint transverse reinforcement amount. The test results show that maximum capacity, energy dissipation capacity, shear strength and bond condition are improved with the application of steel fibers to substitute transverse reinforcement of beam-column connections. Furthermore, several shear strength equations for exterior connections were examined, including the proposed equation for steel fiber-reinforced concrete exterior connections with non-seismic details.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.14 no.1
• /
• pp.50-56
• /
• 1994

This study was investigated for the purposes of securing forage resource using idled rice paddy recently increased in accordance to a current trend of farm products' liberalization and also of presevation of environment by using cattle sluny as liquid manure, which is seriously increasing these days. In this study, mean annual dry matter yield and its seasonal variation with reed canarygrass, and a optimum rate of cattle sluny application were investigated. The results are as follows: 1. According to the conditions of cutting frequencies(3, 4 and 5 cutting per year), mean annual dry matter yield was recorded from 8.9 tons to 10.9 tons per hectare and was the highest at 3 cutting frequency. 2. The use of cattle sluny with the levels of between 300 and 360 kg N per hectare showed a significantly higher mean annual dry matter yield than that of the control (non-fertilization). 3. The treatments with 3 and 4 cutting frequencies(90 kg Nhdyear, 120 kg Nhdyear) recorded higher dry matter yields than the control of the former level by 1.23 tons and 2.34 tons respectively and in the treatment of 5 cutting frequency, the second level with cattle sluny of 300 kg Nhdyear showed an increased dry matter yield of 2.11 tons compared to the former level(l50 kg Nhdyear). With regards to nitrogen efficiency, one kg of nitrogen is applied to 13.7, 19.4 and 14.1 kg of dry matter yields in the conditions of 3, 4 and 5 cutting frequencies respectively. 4. In view of seasonal variance of annual dry matter yield, the second cut in 3 cutting frequency, the third cut in 4 cutting frequency and the third in 5 cutting frequency showed the highest ratio as 42, 37 and 32% respectively compared to the total. 5. Under the conditions of this study, the 'Input-Output curve' from 5 cutting frequency was the closest to sigmaformed process(i=0.9993) of various cutting frequencies, and the maximum marginal yield in the treatment was obtained at the level of 250 kg Nha with cattle sluny. The economic level of cattle sluny was between 371.0 and 402.2 kg N and the highest dry matter yield was obtained at 489.3 kg Mdyear in the same treatment

• Korean Journal of Food Science and Technology
• /
• v.41 no.4
• /
• pp.458-463
• /
• 2009

To establish and validate a liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for the rapid and accurate quantitation of diarrhetic shellfish poisoning (DSP) toxins, we compared the results from different mobile phases and columns used for their analysis and collision energies for MS/MS experiments. Clear peaks of okadaic acid (OA) and dinophysistoxin-1 (DTX1) were obtained by using a mobile phase comprising aqueous acetonitrile containing 2 mM ammonium formate and 50 mM formic acid. The collision energies were optimized to facilitate the most sensitive detection for each toxin, namely, OA, DTX1, pectenotoxin-2 (PTX2), or yessotoxin (YTX). Further, the maximum ion response was obtained at a collision energy of 48 V for OA and DTX1. We compared the analytical performance of $C_8$ and $C_{18}$ columns. A wide range of toxins namely, OA, DTX1, PTX2, and YTX, except DTX3, were detected by both the columns. Although DTX3 was only detected by the $C_8$ column, we found that the $C_{18}$ column was also suitable for the quantitation of OA and DTX1 the toxins responsible for inducing diarrhea. The limit of detection of OA and DTX1 by the established LC-MS/MS conditions was 1 ng/g, and the limit of quantitation of the toxins under the same conditions was 3 ng/g. The process efficiencies were 91-118% for oysters (Crassostrea gigas) and 96-117% for mussels (Mytilus galloprovincialis) further, we observed no significant effect of matrix during the ionization process in LC-MS/MS. The comparison between mouse bioassay (MBA) and LC-MS/MS yielded varying results because low concentrations of OA and DTX1 were detected by LC-MS/MS in some shellfish samples, which provided positive results on MBA for DSP. The analysis time required by MBA for DSP analysis can be reduced by LC-MS/MS.

• Journal of Broadcast Engineering
• /
• v.13 no.2
• /
• pp.200-213
• /
• 2008

H.264| MPEG-4 AVC is a new video codingstandard defined by JVT (Joint Video Team) which consists of ITU-T and ISO/IEC. Many techniques are adopted fur the compression efficiency: Especially, an intra prediction in an inter frame is one example but it leads to excessive amount of encoding time due to the decision of a candidate mode and a RDcost calculation. For this reason, a fast determination of the best intra prediction mode is the main issue for saving the encoding time. In this paper, by using the result of statistical relation between intra $16{\times}16$ and $4{\times}4$ intra predictions, the number of candidate modes for $4{\times}4$ intra prediction is reduced. Firstly, utilizing motion vector obtained after inter prediction, prediction of a block mode for each macroblock is made. If an intra prediction is needed, the correlation table between $16{\times}16$ and $4{\times}4$ intra predicted modes is created using the probability during each I frame-coding process. Secondly, using this result, the candidate modes for a $4{\times}4$ intra prediction that reaches a predefined specific probability value are only considered in the same GOP For the experiments, JM11.0, the reference software of H.264|MPEG-4 AVC is used and the experimental results show that the encoding time could be reduced by 51.24% in maximum with negligible amounts of PSNR drop and bitrate increase.

• The Journal of Korean Society for Radiation Therapy
• /
• v.29 no.1
• /
• pp.69-76
• /
• 2017

Purpose: The purpose of this study was to verify dosimetric results and reproducibility of position during craniospinal irradiation (CSI) using tomotherapy (Accuray Incorporated, USA). Also, by comparing with conventional CSI Technique, we confirmed the efficiency of using a Tomotherapy. Materials and Methods: 10 CSI patients who get tomotherapy participate. Patient-specific quality assurances (QA) for each patient are conducted before treatment. When treating, we took Megavoltage Computed Tomography (MVCT) that range of head and neck before treatment, L spine area after treatment. Also we conducted in-vivo dosimetry to check a scalp dose. Finally, we made a 3D conventional radiation therapy(3D-CRT) of those patients to compare dosimetric differences with tomotherapy treatment planning. Results: V107, V95 of brain is 0 %, 97.2 % in tomotherapy, and 0.3 %, 95.1 % in 3D-CRT. In spine, value of V107, V95 is 0.2 %, 18.6 % in tomotherapy and 89.6 %, 69.9 % in 3D-CRT. Except kidney and lung, tomotherapy reduced normal organ doses than 3D-CRT. The maximum positioning error value of X, Y, Z was 10.2 mm, -8.9 mm, -11.9 mm. Through in-vivo dosimetry, the average of scalp dose was 67.8 % of prescription dose. All patient-specific QA were passed by tolerance value. Conclusion: CSI using tomotherapy had a risk of parallel organ such as lung and kidney because of integral dose in low dose area. However, it demonstrated dosimetric superiority at a target and saved normal organ to reduce high dose. Also results of reproducibility were not exceeded margins that estimated treatment planning and invivo dosimetry showed to reduce scalp dose. Therefore, CSI using tomotherapy is considered to efficient method to make up for 3D-CRT.

• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.1
• /
• pp.38-46
• /
• 2002

Chrysanthemum boreale M. (hereafter, C. boreale M.), a perennial flower, has been historically used as a natural medicine in Korea. With increasing concerns for health-improving foods, the demand for C. boreale M. has become higher than ever. Howevr, the amount of wild C. boreale M. collected from mountainous areas is not enough to cover all demands. The cultivation system and fertilization strategy are required to meet increasing demand on C. boreale M. with a good quality. We investigated the effects of nitrogen application on plant growth and effective components of C. boreale M. to suggest optimum rate of nitrogen fertilization. C. boreale M. was cultivated in a pot scale (1/2000a scale), and nitrogen applied with rate of 0(N0), 50(N50), 100(N100), 150(N150), 200(N200), and $250(N250)kg\;ha^{-1}$. Phosphate and potassium were applied at the same level ($P_2O_5-K_2O=80-80kg\;ha^{-1}$) in all treatments. Maximum yield achieved in 246 and $226kg\;ha^{-1}$ N treatment on the whole plant and the flower part, a valuable part as a herbal medicine, respectively. Proline was the most abundant amino acid in the flower of C boreal M. and the contents of amino acids increased with increasing nitrogen application rate in flower. Nitrogen recovery efficiency was high more than 41% in all nitrogen treatments and increased to 61.8% in nitrogen N100 treatment. From the nitrogen content, the high nitrogen uptake, the low residue of mineral N and the reasonably good apparent fertilizer recovery, it can be inferred that C. boreale M. made efficient use of the available nitrogen. In flower, contents of Cumambrin A. which is a sesquiterpene compound and has the effect of blood-pressure reduction, decreased with increasing nitrogen application. However, the amount of Cumambrin A in flower increased as nitrogen rate increased, because of increasing flower yield. Conclusively, nitrogen fertilization could increase yields and enhance quality. The optimum nitrogen application rate might be on the range of $225{\sim}250kg\;ha^{-1}$ in a mountainous soil.

• Applied Chemistry for Engineering
• /
• v.19 no.3
• /
• pp.299-303
• /
• 2008

A thermally cross-linkable polymer, poly[(2,5-dimethoxy-1,4-phenylenevinylene)-alt-(1,4-phenylenevinylene)] (Cross-PPV), was synthesized by the Heck coupling reaction. In order for the polymer to be cross-linkable, 20 mol% excess divinylbenzene was added. The chemical structure of Cross-PPV and thermally crosslinked Cross-PPV were confirmed by FT-IR spectroscopy. From the FT-IR, UV-Vis, and PL spectral data, thermally crosslinked Cross-PPV was insoluble in common organic solvents. The HOMO and LUMO energy level of thermally cross-linked Cross-PPV were estimated -5.11 and -2.56 eV, respectively, which were determined by the cyclic voltammetry and UV-Vis spectroscopy. From the energy level data, one can easily notice that thermally crosslinked Cross-PPV can be used for hole injection layer effectively. Bilayer structured device (ITO/crosslinked Cross-PPV/PM-PPV/Al) was fabricated using poly(1,4-phenylenevinylene-(4-dicyanomethylene-4H-pyran)-2,6-vinylene-1,4-phenylenevinylene-2,5-bis(dodecyloxy)-1,4-phenylenevinylene (PM-PPV) as the emitting layer, which have HOMO and LUMO energy levels of -5.44 eV and -3.48 eV, respectively. The bilayered device had much enhanced the maximum efficiency (0.024 cd/A) and luminescence ($45cd/m^2$) than those of a single layer device (ITO/PM-PPV/Al, 0.003 cd/A, $3cd/m^2$). The enhanced performance originated from that fact that cross-linked Cross-PPV facilitatse the hole injection to the emissive layer and the injected hole and electron from ITO and Al are recombined in emitting layer (PM-PPV) effectively.