• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.41 no.1
• /
• pp.30-36
• /
• 2015

Objectives: The aim of this study is to determine the incidence, location, and orientation of maxillary sinus septa in formalin embalmed cadavers. Materials and Methods: The study was conducted on 210 cadaveric heads available in our department. After taking the mid-sagittal section the specimens were opened from the medial aspect and the sinus sinus septa, their anatomical plane, location and dimensions. Results: The mean linear distance between maxillary sinus floor and its anatomical ostium was $26.76{\pm}5.21mm$ and $26.91{\pm}4.96mm$ on right and left side, respectively. A total of 59 maxillary sinus septa (28.1%) were observed in 210 maxillary specimens. Septae were most common, 33 septa (55.9%), in the middle region (between first and second molar tooth) of the sinus cavity. The maxillary sinus membrane (Schneiderian membrane) adhered tightly to the maxillary sinus and over the septae. Significantly more maxillary sinus septa were observed in edentulous maxillae in comparison to the dentate upper jaw. Conclusion: Knowledge of location of maxillary sinus ostium is mandatory for the rhinologist for drainage of secretions in maxillary sinusitis. The morphological details of maxillary sinus septa, particularly their location and anatomical planes, will guide dentists in performance of safe implant surgeries. The maxillary antrum septa of category I and II may complicate the procedure of inversion of bone plate and elevation of sinus membrane during maxillary augmentation surgeries. The category III septa observed in the sagittal plane were embedded by one of the branches of the infraorbital nerve in it, and if accidentally cut will lead to infraorbital nerve palsy in maxillary sinus surgeries.

• Journal of Periodontal and Implant Science
• /
• v.49 no.4
• /
• pp.237-247
• /
• 2019

Purpose: To analyze the maxillary sinus anatomy over edentulous ridges in the bilateral posterior maxillary area in Taiwanese patients using cone-beam computed tomography (CBCT). Methods: In total, 101 anatomical sites from 61 patients, including 32 premolar and 69 molar regions, were analyzed using CBCT. Measurements were made of the width and height of edentulous ridges, the thickness of the lateral wall of the maxillary sinus, and the presence of a sinus septum and the posterior superior alveolar artery (PSAA). A statistical analysis of the measurements was performed, and correlations among the measurements were assessed. Results: The average ridge width was $10.26{\pm}3.16mm$, with a significantly greater ridge width in the second molar region than in the premolar region. The mean residual ridge height was $8.55{\pm}4.09mm$, and ridge height showed an opposite trend from ridge width for the premolar and molar regions. A sinus septum was present at 5.9% of the sites, and the PSAA was observed in 24.5%. The average thickness of the lateral wall of the maxillary sinus was $2.08{\pm}0.94mm$, with no significant difference between the tooth position and lateral wall thickness. Conclusions: This study presents the anatomical features of the maxillary sinus, which should be considered in sinus lift procedures for implant placement, in the Taiwanese population. The use of CBCT is recommended to avoid intraoperative complications.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.46 no.4
• /
• pp.292-298
• /
• 2020

Sinus Schneiderian membrane elevation surgery is widely performed for dental implant placement in the maxillary posterior region. With regard to sinus elevation surgery, various complications can occur and lead to implant failure. For successful implants in the maxillary posterior region, the clinician must be well acquainted with sinus anatomy and pathology, a variety of bone graft materials, the principles of sinus elevation surgery, and prevention and management of complications.

• Anatomy and Cell Biology
• /
• v.51 no.4
• /
• pp.236-242
• /
• 2018

The dog frontal sinus may represent an alternative model dental implant research; its topographical resemblance to the maxillary sinus renders it a potentially favorable experimental environment. The aim of this study was thus to elucidate the anatomical configuration of the canine frontal sinus and histological characteristics, and to determine whether it could be a new canine experimental model for dental implant research. Twenty-four sides of canine frontal bones were harvested. The distance from the nasion to the emerging point of the lateral aspect of the canine frontal sinus was measured with the aid of Lucion software. The thicknesses of the canine frontal sinus wall were measured, and the two specimens stained with hematoxylin and eosin. The mean distance from the nasion to the emerging point of the lateral aspect of the canine frontal sinus was 16.0 mm. The mean thicknesses of the canine frontal bone at 3, 6, 9, 12, and 15 mm lateral to the midsagittal plane were 2.3, 2.7, 3.2, 3.8, and 3.7 mm, respectively. The canine frontal sinus was lined with pseudostratified ciliated columnar epithelium. These data suggest that the canine frontal sinus is a suitable alternative to the canine maxillary sinus as a model for studying various sinus augmentation protocols.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.2
• /
• pp.228-239
• /
• 2007

Statement of problem: Following tooth loss, the edentulous alveolar process of maxilla is affected by irreversible reabsorption process, with progressive sinus pneumatization leads to leaving inadquate bone height for placement of endosseous implants. Grafting the floor of maxillary sinus by sinus lifting surgery and augmentation of autologous bone or alternative bone material is a method of attaining sufficient bone height for maxillary implants placement and has proven to be a highty successful. Purpose: This study was undertaken to clarify the morphometric characteristics of inferior maxillary sinus and alveolar process for installation of implants. Material and method: Nineteen skulls (37 sinuses, 10M / 9F) obtained from the collection of the department of anatomy and cell biology of Hanyang medical school were studied. The mean age of the deceased was 69.9 years (range 44 to 88 years). The distance between alveolar border and inferior sinus margin at each tooth, the height of alveolar process and the thickness of cortical bone of the outer and inner table of alveolar process and the inferior wall of maxillary sinus were measured. Results and Conclusion: 1. The septum of inferior maxillary sinus were observe 28 sides (76.%) and located at the third molar (52.6%) and the second molar (26.3%). The deepest points of inferior border of maxillary sinus were located the first or second molar. The distance between alveolar margin and the deepest point of inferior maxillary sinus is $9.7{\pm}4.9mm$. 2. The length of the outer table of alveolar process were $4.9\sim28.2mm$ and the shortest point was between the first and the second molors. The thickness of them were $0.9\sim3.2mm$. The length of the inner table of alveolar process were $7.4\sim25.8mm$ and the shortest point was between the first and the second molars. The thickness of the were $0.9\sim4.6mm$. The results of this study are useful anatomical data for installing of maxillary implants.

• Journal of Periodontal and Implant Science
• /
• v.40 no.2
• /
• pp.56-60
• /
• 2010

Purpose: The sinus lift procedure requires detailed knowledge of maxillary sinus anatomy and the possible anatomical variations. This study evaluated the location and prevalence of maxillary sinus septa using computed tomography (CT). Methods: This study was based on the analysis of CT images for posterior maxilla which were obtained from patients who visited Chonbuk National University Dental Hospital during the period of June 2007 to December 2008. With the exclusion of cases presenting any pathological changes, 236 maxillary sinuses in 204 patients were retrospectively analyzed. The average age of the patients was 50.9. The cases were divided into two groups, an atrophy/edentulous segment and a non-atrophy/dentate segment, and maxillary sinus septa of less than 2.5 mm were not taken in-to consideration. The location of septa was also divided for analysis into 3 regions: the anterior (1st and 2nd premolar), middle (1st and 2nd molar) and posterior (behind 2ndmolar) regions. Results: In 54 (20.9%) of the 204 patients there were pathologic findings, and those patients were excluded from the analysis. Sinus septa were present in 58 (24.6%) of the 236 maxillary sinuses and in 55 (27%) of the 204 total patients. In the atrophy/ edentulous ridge group (148 maxillary sinuses), 41 cases (27.7%) were found, and 17 cases (19.3%) were found in the non-atrophy/ dentulous ridge group (88 maxillary sinuses). In terms of location, septa were found in 18 cases (27.3%) in the anterior, in 33 cases (50%) in the middle and in 15 cases (22.7%) in the posterior regions. Conclusions: In the posterior maxilla, regardless of type of ridge (atrophy/edentulous or non-atrophy/dentate), the anatomical variation of sinus septa is diverse in its prevalence and location. Thus, accurate information on the maxillary sinus of thepatient is essential and should be clearly understood by the surgeon to prevent possible complications during sinus lifting.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.1
• /
• pp.27-31
• /
• 2010

Purpose of study: The purpose of this study was to provide adequate diagnostic guideline for the maxillary sinuses prior to dental implant treatment for edentulous posterior maxillary areas. For this purpose, our procedure involves the estimation of the remaining alveolar bone height, the examination of the anatomical variation in the maxillary sinuses (e.g. sinus septum), and the evaluation of the incidence of preoperative pathological conditions in the maxillary sinuses. Materials and Methods: We selected 189 patients to undergo computerized tomography (CT) in order to account for the posterior maxillary anatomy found in patients of Korean ethnicity. We evaluated the following using Dentascan software: Remaining alveolar bone height, incidence of sinus septum, and rate of preoperative pathologic conditions in the maxillary sinus. The average amount of remaining alveolar bone height was analyzed using the student's t-test for differences according to anatomical site, and the ANOVA was used for the differences according to age group with the level of significance set at 0.05. Results: Alveolar bone heights of upper first premolar, second premolar, first molar, and second molar was 12.24 mm, 10.37 mm, 7.16 mm, and 7.15 mm, respectively with statistical significance (P < 0.05). Incidence of sinus septum as an anatomic variation was 17 out of 189 cases (9.0%). Incidence of mucosal thickening as a pathologic variation was 82 out of 189 cases (43.4%). Conclusion: In treatment planning of posterior maxillary edentulous area of Koreans, the consideration of augmentation surgery for maxillary sinus is required in maxillary molar area before dental implant installation, and preoperative screening of the asymptomatic maxillary sinuses can be regarded as a reasonable preoperative procedure in the planning of dental implant treatment on the posterior maxillary edentulous area.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.47 no.4
• /
• pp.269-278
• /
• 2021

Objectives: The purpose of this animal research was to compare bone regeneration in augmented rabbit maxillary sinuses treated with demineralized particulate human-tooth graft and anorganic bovine bone by immunohistochemical analysis. Materials and Methods: Piezoelectric bilateral sinus augmentation was performed in eight adult rabbits. In the control group, anorganic bovine was grafted in the maxillary sinus following elevation of the sinus membrane. In the experimental group, demineralized human particulate tooth bone was grafted in the sinus. Bone regeneration in augmented sinuses was evaluated by immunohistochemical analysis using various markers of osteoprogenitor cells. Results: The number of bromodeoxyuridine-labeled cells was significantly higher in the experimental group than in the control group at eight weeks. The immunoreactivity of proliferating-cell nuclear antigen was increased slightly in the experimental group relative to the control group at eight weeks. Other bone markers were expressed equally in the two groups. Conclusion: In the rabbit maxillary sinus, higher osteoinduction was correlated with demineralized human particulate tooth bone grafting than with anorganic bovine grafting.

• Journal of Periodontal and Implant Science
• /
• v.36 no.1
• /
• pp.147-154
• /
• 2006

Surgical intervention in the posterior maxillary region requires detailed knowledge of maxillary sinus anatomy and the possible anatomical variations. This study evaluated the incidence, location of maxillary sinus septa by using radiographic (panoramic radiography and computed tomography) findings and comparison of panoramic radography with CT in antral anatomical variation. This study was based on data from 70 sinuses in partial dentate maxilla. The sample consisted of 61 patients(25 women and 36 men, with ages ranging between 19 and 77 years and a mean age of $49.4{\pm}11.3$ years) who were being treatment-planned to receive implant-supported restorations. First, the panoramic images were examined for the presence of antral septa by radiologist and examiner who don't know about CT findings. And incidence of antral septa was evaluated using an axial plane of CT image. The incidence of septa was compared between panoramic radiography and CT. The accuracy of the incidence was compared between radiologists and dentists. A total of 20 septa were found in 70 sinuses on CT image and the prevalence of one or more septa per sinus was found to be 28.6%. The assumed incidence of septa on panoramic radiography was $27.6%{\pm}2.2%$ in radiologist and $31.9%{\pm}5.8%$ in dentists. Erroneous diagnosis rate was 11.42% in radiologist and 15.96% in dentists. 40% of antral septa were located in the anterior(premolar) region, 30% of septa were located in the middle(first molar) and posterior(second molar) region separately. Prior to implant placement, it seems appropriate to consider panoramic radiography as a standard radiographic examination and periapical radiographs may be used to complete the findings in regions not sharply depicted in the panoramic radiograph. And cross-sectional imaging should be used in sites with severe bone loss and close proximity of the maxillary sinus.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.28 no.1
• /
• pp.111-126
• /
• 1998

In this study, radiographic evaluation was made using panoramic radiography and cross-sectional tomography of SCANORA/sup (R)/ in male and female adults in their 20's on the relationship between the maxillary sinus floor and the apex of the maxillary molar, to test the accuracy and effectiveness of the cross-sectional tomography, and to use this information in the assessment of preop. and postop. root canal treatment, apical surgery, extraction and implantology. Forty-one adults with an average age of 24.4 years were studied using panoramic radiography and cross-sectional tomography. In panoramic view and cross-sectional view, the position of the apices of maxillary molars were classified as separated, contacted, or protruded type; the general shape of the maxillary sinus floor was evaluated horizontally and vertically from cross-sectional tomography. The accuracy of each radiography was tested using maxilla from 5 fresh cadavers from the Anatomy Lab at Yonsei University Dental College, and panoramic view and cross-sectional tomography were taken in the same condition as with the patients. The results were as follows: 1. Panoramic view and cross-sectional view were taken in the maxilla specimen, and the actual distance between the maxillary sinus floor and the tooth apices were measured in the specimen; the median values of the distance from the tooth apices to the maxillary sinus floor in the panoramic view, cross-sectional view and in the actual maxilla specimen were 2.83 mm, 4.51mm, and 4.l5mm, respectively. In the cross-sectional view, the measured distance was close to the actual distance but in the panoramic view, the measured distance was far from the actual distance. 2. When the results of the panoramic view and cross-sectional view were compared, 40.5％ of the results agreed with each other in the two radiographic methods and buccal roots of the 2nd molar were the closest to the maxillary sinus floor in the cross-sectional tomography. 3. In cross-sectional view, when the vertical relationship of the maxillary sinus floor and maxillary roots was assessed, in 1st molars, type II (the sinus floor that extends down to the buccolingual furcation area) was predominant, while in 2nd molars, type I (the sinus floor located above the level connecting the buccal and lingual apices) was predominant. In the horizontal relationship, in 1st molars, type II (the lowest floor of the maxillary sinus located in between the buccal and lingual roots) was predominant; in 2nd molars, type I (the lowest floor of the maxillary sinus located on the buccal side of the buccal roots) and type II appeared in similar frequency. In conclusion, the SCANORA/sup (R)/ cross-sectional tomography was more effective than the frequently used panoramic view, in that the relationship of the maxillary molars and maxillary sinus floor can be evaluated more accurately and the buccolingual cross-sectional view can also be observed. And maxillary sinus floor that was close to maxillary 2nd molar had tendency to be located on buccal side than that close to 1st molar. Therefore, cross-sectional tomography is an effective and accurate method to evaluate the position of the teeth in relation to the sinus floor preoperative and can be easily used to diagnose localized periapical lesions. Also, the image quality obtained was quite satisfactory.