• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.11 no.4
• /
• pp.233-238
• /
• 1978

Rainbow trout were reared in a stainless steel aquarium from Nov. 11, 1977 to June 12, 1978, and the following results were obtained : 1. The volume of water was about $400\iota$ in a aquarium measuring $1m\;(Length)\times1m\;(Width)\times67cm(Height)$ and water depth 40 cm. Water was supplied for about 16 hours daily at a rate $3\iota/min$ and was drained through the conical settling part in the middle of the aquarium bottom. Filter tank was about $23cm(W)\times23cm(L)\times40cm(D)$ and contained pebbles 30 cm in depth. Water recirculation rate was at)out $1,030\iota/hr$, or 2.6 turn-over per hour. 2. During the first period (77 days), the trout grew from 88.3g to 229g in average, the total weight attaining 30.7kg. The food coefficient was 1.249, average daily increment 243.3g, average daily growth rate 1.245%, and the mortality was 2 smallest fish weighing 53 g, owing to unknown reason. During the second period (135 days), the trout grew from 239g to 555g in average, the total weight attaining 57.2 kg. The food coefficient was 1.447, average daily increment 279.8g, average daily growth rate $0.65\%$ and the mortality was 31 fish weighing 11,255 g, owing partly to miss-handling and partly to disease. 3. The feed consisting of fully domestic materials was prepared in this laboratory, and the feed conversion was not inferior to high protein commercial feed available in foreign countries. 4. The result of whole period for 212 days was 56.5 kg in gross increment, and based on this result, when $1\iota/min$ full day inflowing water available, the net production will become 28.25 kg. So, if a 5000kg production is planned, $180\iota/min$ or about $10.8m^3/hr$ be reauired, and the production in value frill become 15million won at local price at the expense of about 5.3 million won. From the result of this experiment, rainbow trout is feasible for commercial production in Korea with relatively small amount of well water and simplified water recirculation system.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.10
• /
• pp.591-598
• /
• 2017

Power overshoot phenomenon was observed in microbial fuel cells (MFCs) used non-catalyzed graphite felt as cathode. Voltage loss in MFCs was mainly caused by cathode potential loss. Cheap stainless steel scrubber, which has high conductivity, and Pt/C coated graphite felt as cathode were used for overcoming power overshoot and reducing the cathode potential loss in MFCs. The MFCs used stainless steel scrubber showed no power overshoot even slow catholyte flow rate and produced 29% enhanced maximum current density ($23.9A/m^3$) than MFCs used non-catalyzed graphite felt while the power overshoot phenomenon was existed in Pt/C coated MFCs. Increasing catholyte flow rate resulted in disappearing power overshoot of MFCs used non-catalyzed graphite felt. In addition, maximum power density and current density of both MFCs used non-catalyzed graphite felt and stainless steel scrubber increased by 2-3.5 times. Cathode potential losses in all region of activation loss, ohmic loss, and mass transport loss were reduced according to increase of catholyte flow rate. Therefore, stainless steel scrubber has advantages that are economical materials as electrode and prevents power overshoot, leading to enhance electricity generation. In addition, increasing catholyte flux is one of great solution when power overshoot caused by cathodic overpotential is observed in MFCs.

• Journal of Nutrition and Health
• /
• v.48 no.2
• /
• pp.157-166
• /
• 2015

Purpose: The effects of water extract and distillate from the mixture of black goat meat and medicinal herb on MG-63 osteoblast proliferation and mouse bone marrow derived osteoclast formation were investigated. Methods: Proximate composition, volatile basic nitrogen (VBN), mineral content, free amino acid composition and free fatty acid composition in black goat meat were determined. Water extract and distillate were prepared with three groups; goat meat only (BG-E, BG-D), six herbs added group (BG-E6, BG-D6), and eight herbs added group (BG-E8, BG-D8). Osteoblast proliferation, mineralization and calcium uptake activity of MG-63 cells were measured and tartrate resistant acid phosphatase activity of osteoclasts was analyzed. Results: Black goat meat had remarkably low fat and high level of calcium. Glutamic acid was the most abundant amino acid. Herbs added extract groups (BG-E6 and BG-E8) showed increased MG-63 cell proliferation in a concentration dependent manner, while all the distillates did not show the effect. All extracts and distillates showed significantly increased osteoblast mineralization depending on the concentration. In particular, herb added extract, BG-E6, increased 170.3% of control and the distillate of BG-D and BG-D6 increased up to 168.5% and 159.8%, respectively. Calcium uptake activities of all water extracts showed remarkable increase of BG-E6 and BG-E8 up to 615.5% and 628.1% of control, respectively. Ditillates had no effect except BG-D6. All water extracts significantly reduced the activity of tartrate-resistant acid phosphatase (TRAP) in osteoclasts derived from mouse bone marrow. Conclusion: Combination of black goat meat and medicinal herb increased the MG-63 cell proliferation and effectively inhibited osteoclast differentiation in both water extracts and distillate of them, which implies that they could be used as potent functional food materials for bone health.

• The Journal of Korean Society for Radiation Therapy
• /
• v.18 no.2
• /
• pp.81-87
• /
• 2006

Purpose: Few researches have been peformed on the dose distribution of the moving organ for radiotherapy so far. In order to simulate the organ motion caused by respiratory function, multipurpose phantom and moving device was used and dosimetric measurements for dose distribution of the moving organs were conducted in this study. The purpose of our study was to evaluate how dose distributions are changed due to respiratory motion. Materials and Methods: A multipurpose phantom and a moving device were developed for the measurement of the dose distribution of the moving organ due to respiratory function. Acryl chosen design of the phantom was considered the most obvious choice for phantom material. For construction of the phantom, we used acryl and cork with density of $1.14g/cm^3,\;0.32g/cm^3$ respectively. Acryl and cork slab in the phantom were used to simulate the normal organ and lung respectively. The moving phantom system was composed of moving device, moving control system, and acryl and cork phantom. Gafchromic film and EDR2 film were used to measure dose ditrbutions. The moving device system may be driven by two directional step motors and able to perform 2 dimensional movements (x, z axis), but only 1 dimensional movement(z axis) was used for this study. Results: Larger penumbra was shown in the cork phantom than in the acryl phantom. The dose profile and isodose curve of Gafchromic EBT film were not uniform since the film has small optical density responding to the dose. As the organ motion was increased, the blurrings in penumbra, flatness, and symmetry were increased. Most of measurements of dose distrbutions, Gafchromic EBT film has poor flatness and symmetry than EDR2 film, but both penumbra distributions were more or less comparable. Conclusion: The Gafchromic EBT film is more useful as it does not need development and more radiation dose could be exposed than EDR2 film without losing film characteristics. But as response of the optical density of Gafchromic EBT film to dose is low, beam profiles have more fluctuation at Gafchromic EBT. If the multipurpose phantom and moving device are used for treatment Q.A, and its corrections are made, treatment quality should be improved for the moving organs.

• Journal of Sasang Constitutional Medicine
• /
• v.11 no.1
• /
• pp.221-240
• /
• 1999

1. Purpose of study In the medical science of 'Sasang', a constitutional examination(diagnosis) and a medical treatment are important however a dietary cure is considered as very important at the medical prevention and treatment. But there has been a confusion due to the different view concerning the constitutional foods in between scholars. There it is necessary for us to bring up the theoretical basis of the 'Sasang' constitutional - dietary cure by means of the bibliographical study in relation to a historic, characteristics, efficiency of the major foods. A mellow as called "Baekchejiju" has been used as a source of adding food materials when we make a boiling soup, which is only in Korea but not other countries case. We also studied a hollyhock, a 'Darkpull', a sunflower together with a mellow, because these plants contains a similar characteristics and same chinese word of 'Gue' at their name. At this study we would like to bring up the basis correcting the evil of the misinterpretation to be translated 'Gue' into 'Sunflower', which would be helpful to the current academic circles studied very rarely for the introduction process of sunflower. 2. Method of study We did a comparative study based on not only 'Bonchoseo - original plants book' but also agricultural books, boos of the same kinds and private books. 3. Result of study 1) A mellow has been changed its inscribed name from 'Abushil' to 'A-uk', to 'A-ok', to 'A-uk'. And a winter mellow is called as 'Dol-a-uk' which means the thing is changed a year. 2) The heliotropism of mellow has been used as the symbol of the loyalty and the intelligence. Its meaning has been interpreted expansively engaging with the heliotropism of a hollyhock, a Darkpull, and a sunflower. 3) Once 'Darkpull' had been recognized as 'one day flower'. But after sunflower come, people have confused and misread 'Darkpull' by 'Sunflower'. 4) The first record of sunflower among the existing bibliographical documents is "Chung-jang-gam-chun-seo" (1795). And It is presumed thal the sunflower had introduced in Korea at the early to mid of the eighteen century. 5) The interpretation for mellow has been made s confusion by a several documentary and dictionary record, but should be corrected to be right.

• Radiation Oncology Journal
• /
• v.21 no.1
• /
• pp.100-106
• /
• 2003

Purpose : To develop a patients' setup verification tool (PSVT) to verify the alignment of the machine and the target isocenters, and the reproduclbility of patients' setup for three dimensional conformal radiotherapy (3DCRT) and intensity modulated radiotherapy (IMRT). The utilization of this system is evaluated through phantom and patient case studies. Materials and methods : We developed and clinically tested a new method for patients' setup verification, using digitally reconstructed radiography (DRR), simulation, porial and digital images. The PSVT system was networked to a Pentium PC for the transmission of the acquired images to the PC for analysis. To verify the alignment of the machine and target isocenters, orthogonal pairs of simulation images were used as verification images. Errors in the isocenter alignment were measured by comparing the verification images with DRR of CT Images. Orthogonal films were taken of all the patients once a week. These verification films were compared with the DRR were used for the treatment setup. By performing this procedure every treatment, using humanoid phantom and patient cases, the errors of localization can be analyzed, with adjustments made from the translation. The reproducibility of the patients' setup was verified using portal and digital images. Results : The PSVT system was developed to verify the alignment of the machine and the target isocenters, and the reproducibility of the patients' setup for 3DCRT and IMRT. The results show that the localization errors are 0.8$\pm$0.2 mm (AP) and 1.0$\pm$0.3 mm (Lateral) in the cases relating to the brain and 1.1$\pm$0.5 mm (AP) and 1.0$\pm$0.6 mm (Lateral) in the cases relating to the pelvis. The reproducibility of the patients' setup was verified by visualization, using real-time image acquisition, leading to the practical utilization of our software Conclusions : A PSVT system was developed for the verification of the alignment between machine and the target isocenters, and the reproduclbility of the patients' setup in 3DCRT and IMRT. With adjustment of the completed GUI-based algorithm, and a good quality DRR image, our software may be used for clinical applications.

• Radiation Oncology Journal
• /
• v.21 no.4
• /
• pp.322-329
• /
• 2003

Purpose: It is difficult to exactly determine the surface dose and the dose distribution In buildup region of high energy X-rays by using the conventional ion chamber. The aim of this study Is to evaluate the accuracy of widely used dosimetry systems to measure the surface dose and the depth of maximum dose (d$_{max}$). Materials and Methods: We measured the percent depth dose (PDD) from the surface to the d$_{max}$ in either a water phantom or in a solid water phantom using TLD-100 chips, thimble type ion chamber, diode detector, diamond detector and Markus parallel plate ion chamber for 6 MV and 15 MV X-rays, 10$\times$10 cm$^{2}$, at SSD=100cm. We analysed the surface dose and the d$_{max}$. In order to verify the accuracy of the TLD data, we executed the Monte Carlo simulation for 5 MV X-ray beams. Results: The surface doses In 6 MV and IS MV X-rays were 29.31% and 23.36% ior Markus parallel plate ion chamber, 37.17$\%$ and 24.01$\%$ for TLD, 34.87$\%$ and 24.06$\%$ for diamond detector, 38.13$\%$ and 27.8$\%$ for diode detector, and 47.92$\%$ and 35.01$\%$ for thimble type ion chamber, respectively. in Monte Carlo simulation for 6 MV X-rays, the surface dose was 36.22$\%$, which Is similar to the 37.17$\%$ of the TLD measurement data. The d$_{max}$ In 6 WV and 15 MV X-rays was 14$\~$16 mm and 27$\~$29 mm, respectively. There was no significant difference in the d$_{max}$ among the detectors. Conclusion: There was a remarkable difference in the surface dose among the detectors. The Markus parallel plate chamber showed the most accurate result. The surface dose of the thimble ion chamber was 10$\%$ higher than that of other detectors. We suggest that the correction should be made when the surface dose of the thimble ion chamber Is used for the treatment planning ion the supeficial tumors. All the detectors used In our study showed no difference in the d$_{max}$.

• Radiation Oncology Journal
• /
• v.29 no.3
• /
• pp.164-173
• /
• 2011

Purpose: This research aimed to analyze the patterns of co-authorship network among the Korean radiation oncologists and to identify attributing factors for the formation of networks. Materials and Methods: A total of 1,447 articles including contents of ‘Radiation Oncology' and 'Therapeutic Radiology' were searched from the KoreaMed database. The co-authorship was assorted by the author's full name, affiliation and specialties. UCINET 6.0 was used to fi gure out the author's network centrality and the cluster analysis, and KeyPlayer 1.44 program was used to get a result of key player index. Sociogram was analyzed with the Netdraw 2.090. The statistical comparison was performed by a t-test and ANOVA using SPSS 16.0 with p-value < 0.05 as the significant value. Results: The number of articles written by a radiation oncologist as the first author was 1,025 out of 1,447. The pattern of coauthorship was classified into five groups. For articles of which the first author was a radiation oncologist, the number of singleauthor articles (type-A) was 81; single-institution articles (type-B) was 687; and multiple-author articles (type-C) was 257. For the articles which radiation oncologists participated in as a co-author, the number of single-institution articles (type-D) was 280 while multiple-institution articles (type-E) were 142. There were 8,895 authors from 1,366 co-authored articles, thus the average number of authors per article was 6.51. It was 5.73 for type-B, 6.44 for type-C, 7.90 for type-D, and 7.67 for type-E (p = 0.000) in the average number of authors per article. The number of authors for articles from the hospitals published more than 100 articles was 7.23 while form others was 5.94 (p = 0.005). Its number was 5.94 and 7.16 for the articles published before and after 2001 (p = 0.000). The articles written by a radiation oncologist as the first author had 5.92 authors while others for 7.82 (p = 0.025). Its number was 5.57 and 7.71 for the Journal of the Korean Society for Therapeutic Radiology and Oncology and others (p = 0.000), respectively. Among the analysis, a significant difference in the average number of author per article was indicated. The out-degree centrality of network among authors was 4.26% (2.03-7.09%) while in-degree centrality was 1.31% (0.53-2.84%). The three significant nodes were classified and listed as following: Choi, Eun Kyung for 1991-1995, Kim, Dae Young for 1998-2001, Park, Won and Lee, Sang Wook for 2003-2010. Choi, Eun Kyung and Kim, Dae Young appeared in two cases, and ranked as the highest degree in centrality. In the key player analysis, Choi, Eun Kyung and Lee, Sang Wook appeared in two cases, and ranked as the highest. From the cluster analysis, Sungkyunkwan University, Seoul National University and Yonsei University revealed as the three large clusters when Ulsan University, Chonnam National University, and Korea Institute of Radiological & Medical Science as the medium clusters. Conclusion: The Korean radiation oncologist's society shows a closed network with numerous relationships among the particular clusters, and the result indicates it is different from other institutions in the pattern of co-authorship formation of the major hospitals.

• The Journal of the Petrological Society of Korea
• /
• v.13 no.1
• /
• pp.34-45
• /
• 2004

This paper describes the textural relations of mantle xenoliths and fluid inclusions in mantle-derived rocks found in alkaline basalts from Jeju Island which contain abundant ultramafic, felsic, and cumulate xenoliths. Most of the ultramafic xenoliths are spinel-lherzolites, composed of olivine, orthopyroxene, clinopyroxene and spinel. The felsic xenoliths considered as partially molten buchites consist of quartz and plagioclase with black veinlets, which are the product of ultrahigh-temperature metamorphism of lower crustal materials. The cumulate xenoliths, clinopyroxene-rich or clinopyroxene megacrysts, are also present. Textural examination of these xenoliths reveals that the xenoliths are typically coarse grained with metamorphic characteristics, testifying to a complex history of evolution of the lower crust/upper mantle source region. The ultramafic xenoliths contain protogranular, porphyroclastic and equigranular textures with annealing features, indicating the presence of shear regime in upper mantle of the Island. The preferential associations of spinel and olivine with large orthopyroxenes suggest a previous high temperature equilibrium in the high-Al field and the original rock-type was a Al-rich orthopyroxene-bearing peridotite without garnet. Three types of fluid inclusions trapped in mantle-derived xenoliths include CO$_2$-rich fluid (Type I), multiphase silicate melt (glass ${\pm}$ devitrified crystals ${\pm}$ one or more daughter crystals ＋ one or more vapor bubbles) (Type II), and sulfide (melt) inclusions (Type III). C$_2$-rich inclusions are the most abundant volatile species in mantle xenoliths, supporting the presence of a separate CO$_2$-rich phase. These CO$_2$-rich inclusions are spatially associated with silicate and sulfide melts, suggesting immiscibility between them. Most multiphase silicate melt inclusions contain considerable amount of silicic glass. reflecting the formation of silicic melts in the lower crust/upper mantle. Combining fluid and melt inclusion data with conventional petrological and geochemical information will help to constrain the fluid regime, fluid-melt-mineral interaction processes in the mantle of the Korean Peninsula and pressure-temperature history of the host xenoliths in future studies.

• Food Science and Preservation
• /
• v.17 no.1
• /
• pp.58-65
• /
• 2010

We investigated the effect of Chun ma (Gastrodiae rhizoma) concentrated extract on the quality of mixed beverages. Chun ma beverages prepared using different concentrated extracts were divided into four groups: GCE 5 ($5^{\circ}$ Brix concentrated extracts) GCE 10 ($10^{\circ}$ Brix concentrated extracts) GCE 15 ($15^{\circ}$ Brix concentrated extracts) and GCE 20 ($20^{\circ}$ Brix concentrated extracts). The pH values ranged from a low of 4.37 in GCE 5 to a high of 4.68 in GCE 20. Soluble solid levels in GCE 20 ($19.6^{\circ}$ Brix) were higher than in the other samples. The b (yellowness) scores and the total phenolic contents of all samples increased with increasing extract concentration. The highest total phenolic contents were seen in GCE 20 samples at 232.23 mg%. Samples did not differ markedly in antiradical activity (75.07-76.00% DPPH inhibition). Free sugar levels in GCE 20 samples and organic acid concentrations of GCE 15 samples were higher than those of other preparations. Free amino acid and mineral contents of all samples increased with increasing extract concentration. The levels of free amino acids were in the order Glu > Gly > Ser > Arg > Hylys, and the Glu content was 249.15 ug/100 g for GCE-20 samples and 61 ug/100 g in GCE-5 products. The mineral contents of all samples were in the order K > Na > Mg > Ca. Higher scores for color, flavor, and overall acceptability were found in GCE 5 products compared with other extracts. These results indicate that Chun ma beverage can be prepared in various ways, as commercially desired, with reference to the above characteristics of Chun ma materials.