• Journal of the Korean Applied Science and Technology
• /
• v.35 no.2
• /
• pp.423-432
• /
• 2018

Arthrospira platensis is one of the oldest algae in the world and has been reported to have anti-aging properties, including phycocyanin, tocopherol and beta-carotene. In this study, we tried to search protective activities against UVB-induced reactive oxygen species(ROS) of Arthrospira platensis under indoor cultivation ethanol extracts(ICAE) and outdoor cultivation ethanol extracts(OCAE). The anti-oxidative capacities were evaluated by DPPH radical scavenging activity and SOD-like activities at various concentrations(0.1, 0.5, $1mg/m{\ell}$) of ICAE and OCAE. Zebrafish embryos and HaCaT cells were exposed to UVB radiation and treated with various concentrations(0, 0.01, 0.05, 0.1, 0.5, $1mg/m{\ell}$) of ICAE and OCAE. ROS levels of zebrafish and HaCaT cells were generated by UVB radiation. ROS levels were detected using a fluorescent microscope after DCFH-DA staining. The DPPH radical scavenging activity of ascorbic acid was 73% and SOD-like activity was 86% in the positive control group. ICAE and OCAE at $1mg/m{\ell}$ concentration showed 43, 57% DPPH radical scavenging activity and 20, 19% SOD-like activity. Anti-oxidative of ICAE and OCAE had lower effects than the positive control ascorbic acid but significant results. ROS of UVB-induced zebrafish embryos and HaCaT cells were higher than negative control. ICAE and OCAE treated group decreased ROS concentration dependently than UVB-induced positive control group. These results suggest that Arthrospira platensis ethanol extract may have usability value as a cosmetic material for skin protection.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.5
• /
• pp.1285-1297
• /
• 2020

In this study, we report the results of a study on the clinical evaluation of wrinkle improvement by developing a method for liposome of high-purity Centella asiatica extract used in pharmaceuticals and cosmetics, and a cream using the same. In order to make Centellasome-10EX stabilizing centella asiatica extract in liposome lamella vesicle, it could be completed using 5% hydrogenated lecithin and 2% sucrose distearate. The appearance of Centellasome-10EX was a creamy form of low viscosity, the color was pale yellow, and the odor had the inherent odor of the raw material. The pH was about 6.12, the specific gravity was 1.09, and the acid value was about 0.35. The content of the main constituents of centella asiatica extract contained in the liposome vesicle contains 10,800 ppm of asiatic acid, 10,900 ppm of asiaticoside, 6,000 ppm of madecasic acid, and 1,600 ppm of madecassoside, and long-term storage. There was no discoloration even at the time, and it was found that the main component remained stable thermodynamically. To mechanistically analyze the structure of the liposome vesicle of Centellasome-10EX, as a result of observation with a transmission electron microscope (Cryo-TEM), the multilayer vesicles are formed and filled with moisture, and there are 10 to 60 multilayers around it. It was confirmed that the liposome lamella vesicle was formed. As a clinical trial (in-vivo) test, the moisturizing effect of centellasome cream after application for 5 weeks was 28.3%, which was significantly increased compared to placebo. The skin elasticity effect was 13.6%, which significantly increased the moisturizing power than the placebo. The effect of improving fine wrinkles around the eyes was improved by 23.52% compared to placebo cream. Through the results of this study, it was possible to study the formulation and manufacturing method for encapsulation and stabilization of the developed Centellasome-10EX in the liposome vesicle. It is expected that the results obtained through clinical research on the wrinkle improvement effect of the cream using this can be widely used to study skin science in the cosmetic industry and to develop high-quality cosmetics with high efficacy.

• Journal of the Korean Society of Costume
• /
• v.22
• /
• pp.263-276
• /
• 1994

The achievement of notable social reoforms attained during the period of 19th and 20th centuries needlessly speaking remodelded the social environmental into several different patterns such as :1) high industrialization 2) propensity to consume 3) up graded overall social stands. Accordingly the industrial world of the but-tons too established the mess production syhstem by breaking from convention of hand-craft work of 17th century. The raw materials used in the production line on buttons during the 20th century are almost all-kind of materials one can possibly named including cheap plastic which enabled production lines to produce cheaper but higher productivities of the buttons being produced, The design (incused design) used in the 19-20h centuries are : men landscape, sports features, birds, livestocks, bugs, or geomatric features, tec, 1, The classification o f the buttons by materials Techniques shapes colors marking (Incused design) used in the productionof buttons in the England United States of America Laska Italy france Denmark Japan and India are categolizzed as : natural raw materials and syntetical resines. 1) Of the natural raw materials used are : Matal Enamel Iodine Agate, Coral, Green jade(Jasper) Granite, Wood, Ivory, Horn and bone etc. 2) The sythetical resin used in the button in-dustries are : Artificial jewell glass Acrylic material Styroform Celluloid and Nylon etc. 2. The thecnique quoted in producing buttons are hand craft work inlay work precision casting press mosic dye etching, processing, engraving and embossed carving etc. 3. The major designs used in the buttons in -dustries are : Round shape however elliptical column angular and edge shape often used. 4. The colors used are : The multi-colors were highly used than mono-colored materials such as : Adjoining Color and Contrast Color. The highest consideration to be considered in choosing the colors for the buttons are harmonization and matching factor with the garment or dresses to be wore. 5. The major design(incused design) on the buttons are embodiment and the design were also used in order of abstractive-combination abstractive with has offers much surprising. The button industries during the 19th and 20th centuries were not only the determination factors those can judge the value of self-pride of Nation and which were far beyond the in-dustrial arts in those days but also highly refelected and influenced by cultural sense ideology and self-pride of the Nation of those period. The followings are details of the role of the buttons categolized in the order of functional ornamental and symbolical aspects : 1. The functional role : The functional role of the buttons were simply designed for dress how-ever the buttons beyond from this role of function now a days. 2. The ornamental role : The ornamental role of he button beyond from this role of the button were effectuated by : 1) shape materials colors 2) technique locations size and design (incused design) 3) The ramaterials used for buttons shall not be over looked because it is highly depends on the taste sense and combination of harmony with the garment to be wore. 4) The color of the buttons are made well contrasted with the color of garments just as in the case of other artistical area such as matchs with the color of garment of contrast with brigtness of colors contrasted as complementary color and so and so. 5) The technique being adoped are: precision casting press handcraft inlay work etching mosic etc,. Since the buttons are no longer a simple catching devise used to fasten together the different part of the dress but now it has formed own and occupied the independent role in the garment or dresses location can be de-termined and varying depending on the ideas of designers. The size of the buttons has no specific limits, However the variation has widely dependined on the entire circumperence rhythm contrast harmonization of the garments. 3. The symbolical role : Since the button is no longer a just a simple devise for catching and fastening device used fastening together the different part of the garments but now were built a independent area as major part of the Garment and well reflected all kinds of occupations political background cultural as-pect etc. on the buttons. The design of buttons in the western circles are more simplified but they are polished looks and their techniques of manufacturing are comination of both machanis and handcraft. The colors used in the buttons are pretty well harmonized with garment(dress). Almost all kind of materials can be used in the but-tons however materials used in the buttons are : Bone of livestocks ivory, turtle shell are no longer used because the prevention of cruely of animal. On the contraly the level of buttons indus-try of Korea is far to reach and catch up with the level of western circles. It is highly suggested therefore the but-tons industrial field of Republic of Korea shall place and encouragement in producing beter industrial environment of the buttons based on the traditional and cultural aspect of republic of Korea to produce both manufacturing of qulified and best designed and colored buttons.

• Korean Journal of Oriental Medicine
• /
• v.2 no.1
• /
• pp.71-83
• /
• 1996

Hyang-Yack-Ku-Keup-Bang(鄕藥救急方) is our own, medical work written about the middle of the time of Korea Dynasty. I restored and researched this book because it needed to be illuminated about its medico-historic value and then I came to some conclusions as follows. 1. Hyang-Yack-Ku-Keup-Bang was published in Dae-jang-do-kam(大藏都監) of Kanghaw island(江華島) about the middle of Korea Dynasty. Choi Ja-ha(崔自河) republished it on original publication ground in Euiheung(義興) of Kyungsang-Province(慶尙道) in July, Taejong's(太宗) 17th year of Chosen Dynasty (A.D.1417) and this book was published again in Chungcheng Province(忠淸道) in Sejong's(世宗) 9th year(A.D.1427). The book published in Taejong's days was in the possession of books department of Kung-nae-cheng(宮內廳) in Japan and was the oldest medical book of existing ones. 2. Bang-Jung-Hyang-Yack-Mock-Cho-Bu(方中鄕藥目草部) of this book was originally intended to be adjusted in each division with the title of Bang-Jung-Hyang-Yack-Mock(方中鄕藥目). But Herb part(草部) only followed editing progress of Jeung-Lew-Bon-Cho(證類本草), the rest is not divided into each part and is together arranged at the below of Herb part with the title of Bang-Jung-Hyang-Yack-Mock-Cho-Bu. The Korean inscriptions on some drugstuffs in this book are different between Native Name(鄕名) of three volumes of provisions and general-spoken(俗云) of Bang-Jung-Hyang-Yack-Mock-Cho-Bu. In this, it is estimated that the publishing time and editor of tile volume of provisions and Bang-Jung-Hyang-Yack-Mock-Cho-Bu are different. I think Choi Ja-ha compiled this behind three volumes of provisions when he published. 3. This book picked some prescriptions which consisted of obtainable drugs with ease in Korea in the books of Chell-Keum-Yo-Bang(千金要方), Oi-Dae-Bi-Yo(外臺秘要), Tae-Peong-Sung-Hye-Bang(太平聖惠方), Ju-Hu-Bang(?後方), Kyung-Hum-Yang- Bang(經驗良方) Bo-Je-Bon-Sa-Bang(普濟本事方) Bi-Ye-Baik-Yo-Bang(備預百要方) and so on and got together our own prescriptions. On the whole Bi-Ye-Baik-Yo-Bang was a chief referrence book, On this, other books referred to and corrected. 4. In provisions quoted from Hyang-Yack-Jip-Sung-Bang(鄕藥集成方), there are seven provisions; leg-paralysis part, coughing part, headache part, obstetrics part, etc. don't show in this book. This is why Choi Ja-ha published only certain texts on Dae-jang-do-kam edition his own posession. So we can think the existing edition has a little misses compared with original edition. 5. This book recorded only names of drugstuffs in animal drug department like fowls, crab, goldbug, earthworm, etc. and didn't tell us ways of taking those. This is effect of Buddhist culture on medicine. This is efforts to practice 'Don't murder';one of Five Prohibition of Buddhism. 6. Beacause this book was published at the time, when our originative medicine would be set forth. This followed the Chinese ways in Theory, Treatment, Prescription and used 'Hyang Yack' in Medication out of theory of Korean medicine, which was a transitional form. So this is all important material which tell us aspects of development of 'Hyang Yack' the middle of Korea Dynasty.and this is also the beginning of originative, medical works like Dong-Eui-Bo-Kam(東醫寶鑑), Dong-Eui-Su-Bo-Won(東醫壽世保元). 7. There are few contents based on 'Byen-Jeung-Lon-Chi(辨證論治)'in this book. So we can see this book is not for doctors who study medical thoughts but for general public who suffer from diseases resulted from war. Because this book was written for a first-aid treatmeant, this is an index of medical service for the people those days. And this is also an useful datum for first-aid medicine or military medicine in these modern days. 8. Nowadays, parts of learned world of Korean medicine disregard essential theories and want to explain Korean medicine only by the theories or the methods of Western medicine. Moreover they don't adopt Chinese and Japanese theorys & thoughts about Oriental medicine in our own style and just view in there level. What was worse, there is a growing tendency for them to indulge in a trimming policy of scholarship and to take others' ideas. I think these trends to ignore our own medical thoughts involving growth of 'Hyang Yack' in the middle of Korea Dynasty, Dong-Eui-Bo-Kam and Dong-Eui-Su-Se-Bo-Won. So we, as researchers of Korean medicine, must get out of this tendency, and take over brilliant tradition and try to develop originative Korean medicine.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.31 no.2
• /
• pp.103-117
• /
• 2013

This research analyzed the spatial components and establishment of the Tap-gol Park according to the plans between 1897 to 1916 when the discussions on the construction of the park began and it was accomplished as an urban park. The results are as follows. The establishment of Tap-gol Park can be divided by three period. Firstly, Tap-gol Park was owned by the royal family from 1987 to 1904. The discussions on construction of Tap-gol Park as a first urban park of Gyeongseong(京城) in 1897, and the private houses were tear down in order to secure land for the park in 1899. Gates and fences surrounding of Tap-gol Park were organized and it was opened in 1902 based on park plane of turtle - shaped. The octagonal pavilion for 'Lee-Wang-Jik musical band(李王職音樂隊)' was relocated in the southwestern part of the park in 1903. Secondly, Tap-gol Park was used actively by the public between 1910 to 1913, because it was opened for individuals. Also The boundary of Park were changed by surrounding facilities and recreational facilities and benefits was complemented for users. Tap-gol park was opened at nighttime in August 1913. Tap-gol Park was used as a place of amusement park. Thirdly, commercial facilities were made as the park facility between 1914 to 1916. The purpose of 'Kkikdajeom(喫茶店)' was similar to the one of modern cafes. It was built as a typical Japanese tea-house with a small pond having an island and a bridge constructed inside. With the increase of usage of Tap-gol Park as a recreational area by the citizens in 1916, the pavilion as a rest area and toilet as amenities were supplemented. Superintendent's office was equipped too. Simple chairs made from the wooden logs were installed around greenhouse, concert hall, the Wongaksa Buddhist temple(圓覺寺址十層石塔), and the flower garden was fenced round. After the relocation of Yongsan music band to Tap-gol Park, the existing concert hall was demolished. The shape of the park which was seen from the pictures of the magazines of 1920s were achieved as early as 1916. The importance of this research includes the basis to revise the errors of the preexistence researches and value of historical material of the design plan reference of the park which was accomplished during the Japanese colonial era. Also this research is to study on the spatial components of the modern landscape architecture and parks.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.279-287
• /
• 2018

Sealants are an important element of modern architecture and serve as a building protection against weathering by providing barriers against ingress of moisture, air, and other materials. Exposure to a variety of environments often reduces lifespan due to changes in physical, chemical and mechanical characteristics, and UV, humidity, and temperature expansion are important issues that are directly related to durability. In this study, a combined deterioration test chamber was developed to simulate the environment of the open air as an instrument for verifying the durability of structural sealing materials indoors. In order to replicate special weather conditions, such as yellow dust, acid rain, and contamination by microorganisms, it was deemed impossible to replicate the outdoor environment by 100 %, and the results of the results of the results of the external exposure test of the structural sealant and the combined deterioration testing device. As a result of the displacement test of the outdoor exposure test, it was determined that the sealant was breaking apart and that it would be smooth, and the displacement would be up to three times greater than the initial material value of 1 year. The displacement test results of the combined deterioration test device show the tendency to deteriorate, decreasing the elasticity and tensile characteristics. In the case of denatured silicon, the current 400 cycles have been completed to confirm 12 months of degradation of the external exposure. The deformation of the test specimen cannot be verified with the naked eye, so it is considered that the conditions of the specimen are more stable than the silicon sealant. As a result of the outdoor exposure test, if the combined deterioration test device is structured and proposed in the relevant guidance or specification, the anticipated lifespan of 12 months in the actual use environment can be verified indoors and below 3 months later, economically.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.13 no.4
• /
• pp.89-99
• /
• 2005

The golf courses more than about 200 are operating in Korea. From the golf courses, a great amount of turfgrass clippings tend to increase, steadily. Materials used in the experiment were Creeping Bentgrass(CB), Kentucky Bluegrass(KB), Korean Lawngrass(KL), rice bran and composted chicken drop. Treatments are CB, KB, and KL. The temperature during the composting of all treatments increased rapidly and reached at the highest temperature($57.9^{\circ}C$, $67.8^{\circ}C$, $74.3^{\circ}C$) within 20 days, and then stabilized to the range of $35.2{\sim}41.6^{\circ}C$ at the 30th day. The pH values of all treatments decreased on the first day. However, they were increased rapidly after three days and decreased again on 10~20 days. The pH values of all treatments at the final day were stabilized to the low alkali levels. The contents of total carbon during the period of composting tend to decrease and total nitrogen was increased for factor of reduction of volume. CEC value of all treatments during the period of composting tends to increase. The round paper chromatogram of extracted solution of KL sample was the sharpest and clearest among all treatments. The G.I. values of CB, KB, and KL in 30th day of composting were about 95.1, 77.7, and 98.7 in germination test using chinese cabbage, respectively. Conclusively, all turfgrass clippings used in this experiment were composted well, suitable as composting products standardized by KSC. The maturity of the final compost samples is best in KL, followed by CB and KB treatments. The turfgrass compost can contribute to the plant cultivation for environment-friendly farm, and the results of this study can become the basic data of turfgrass clippings compost. Further research on the mixing ratio of each material is required to produce compost of good quality.

• The Journal of Korean Society for Radiation Therapy
• /
• v.17 no.1
• /
• pp.9-17
• /
• 2005

Purpose : Uniform dose distribution of the target volume is very important in the radiation treatment. We will evaluate the usefulness of Field-in-Field Technique use to get uniform dose distribution of the target volume and try to find Apply possibility out to a whole brain treatment patient of various thickness. Material and method : We compare the dose distribution when we applied Field-in-Field Technique and parallel opposed fields technique. establish the treatment plan to a phantom(acryl 16cm spheral phantom) and do the measurement, assessment use the TLD and Low sensitivity film. Also the assessment did Apply possibility of Field-in-Field Technique to 20 patient object of various thickness. Result : In the case to use the parallel opposed fields at the whole brain treatment $10-12\%$ high dose region appeared but reduce to $3-4\%$ lesses when we used the Field-in-Field technique. We could get similar numerical value the film and TLD measurement result also. The change of the dose distribution appeared to its ${\pm}1{\sim}2\%$ although it applied such Field-in-Field technique to various patient so that we were identical. Conclusion : We can get uniform dose distribution of in the treatment region if we apply the Field-in-Field technique at the whole brain treatment. Also alternate can play the role of the wedge filter and 3D compensator and We are thought by minimizing the obstacle to be happened due to the high dose region when radiation treatment.

• Journal of Chest Surgery
• /
• v.36 no.8
• /
• pp.583-589
• /
• 2003

With the purpose of identifying significant risk factors in poststernotomy sternal wound infection and mediastinitis, we underwent a retrospective analysis of the whole patients operated on at the our department of cardiovascular surgery for the two years. Material and Method: From March 200f to March 2003 at the depart-ment of cardiovascular surgery, medical school of Soonchunhyang University, major sternal wound infections had been developed in 12 (9.76%) of 123 consecutive patients. These patients underwent open-heart procedure through a midline sternotomy and survived long enough for infection to appear. For this group of patients, we evaluated possible risk factors such as age, sex, diabetes mellitus, chronic obstructive pulmonary disease, obesity, interval between hospital admission and operation, type of surgical procedure, elective or emergency surgical procedure, reoperation, duration of surgical procedures, duration of cardiopulmonary bypass, amount of blood transfused, post-operative blood loss, chest reexploration, rewiring of a sterile sternal dehiscence, duration of mechanical ventilation, and days of stay in the intensive care unit and analyzed these factors. Result: Analysis represented that age, sex, diabetes mellitus, type and mode of surgical procedure, reoperation, duration of operation, duration of cardio-pulmonary bypass, and interval between hospital admission and operation were not significantly associated with wound infection. For all other predisposing factors, p-values of less than .05 were demonstrated. Eight emerged as significant: early chest reexploration (p=0.001), sternal rewiring (p< 0.0001), chronic obstructive pulmonary disease (p<0.0001), blood transfusions (p<0.05), postoperative bleeding (p=0.008), days of stay in the intensive care unit (p< 0.0001), duration of mechanical ventilation (p=0.001), and obesity (p=.003). Conclusion: Contamination of pa-tients may occur before, during, and after the operation, and any kind of reintervention may predispose the patient to wound infection.

• Journal of Chest Surgery
• /
• v.36 no.8
• /
• pp.559-565
• /
• 2003

By improving the flow pattern in Fontan circuit, total cavopulmonary connection (TCPC) could result in a better outcome than atriopulmonary connection Fontan operation. For the patients with impaired hemodynamics after atriopulmonary Fontan connection, conversion to TCPC can be expected to bring hemodynamic and functional improvement. We studied the results of the revision of the previous Fontan connection to TCPC in patients with failed Fontan circulation. Material and method: From October1979 to June 2002, eight patients who had failed Fontan circulation, underwent revision of previous Fontan operation to TCPC at Yonsei University Hospital. Intracardiac anomalies of the patients were tricuspid atresia (n=4) and other functional single ventricles (n=4). Mean age at TCPC conversion was 14.0$\pm$7.0 years (range, 4.6~26.2 years) and median interval between initial Fontan operation and TCPC was 7.5 years (range, 2.4~14.3 years). All patients had various degree of symptoms and signs of right heart failure. NYHA functional class was 111 or IV in six patients. Paroxysmal atrial fibrillation (n:f), cyanosis (n=2), intraatrial thrombi (n=2), and protein losing enteropathy (PLE) (n=3) were also combined. The previous Fontan operation was revised to extracardiac conduit placement (n=7) and intraatrial lateral tunnel (n=1). Result: There was no operative death. Major morbidities included deep sternal infection (n=1), prolonged pleural effusion over two weeks (n=1), and temporary junctional lachyarrhythrnia (n=1). Postoperative central venous Pressure was lower than the preoperative value (17.9$\pm$3.5 vs. 14.9$\pm$1.0, p=0.049). Follow-up was complete in all patients and extended to 50,1 months (mean, 30.3$\pm$ 12.8 months). There was no late death. All patients were in NYHA class 1 or 11. Paroxysmal supraventricular tachycardia developed in a patient who underwent conversion to intraatrial lateral tunnel procedure, PLE was recurred in two patients among three patients who had had PLE before the convertsion. There was no newly developed PLE. Conclusion: Hemodynamic and functional improvement could be expected for the patients with Fontan circulatory failure after atriopulmonary connection by revision of their previous circulation to TCPC. The conversion could be performed with low risk of morbidity and mortality.