• Journal of Pharmaceutical Investigation
• /
• v.38 no.2
• /
• pp.111-117
• /
• 2008

To overcome the solubility of poorly water-soluble drug, the formation of solid dispersion using a spray-dryer with polymeric material, that can potentially enhance the dissolution rate extend of drug absorption was considered in this study. $Eudragit^{(R)}$ E100 as carrier for solid dispersion is acrylate copolymer that soluble in acidic buffer solutions (below pH 5.0). It was used to increase dissolution of atorvastatin calcium as a water-insoluble drug in acidic environments. In this study, a spray-dryer was used to prepare solid dispersion of atorvastatin calcium and $Eudragit^{(R)}$ E100 for purpose of improving the solubility of drug. Atorvastatin calcium and $Eudragit^{(R)}$ E100 were dissolved in ethanol and spray-dryed. DSC and XRD were used to analyze the crystallinity of the sample. It was found that atorvastatin calcium is amorphous in the $Eudragit^{(R)}$ E100 solid dispersion. FT-IR was used to analyze the salt formation by interaction between atorvastatin calcium and $Eudragit^{(R)}$ E100. Comparative dissolution study exhibited better dissolution characteristics than the commercial drug ($Lipitor^{(R)}$) as control. The dissolution rate of atorvastatin calcium was markedly increased in solid dispersion system in simulated gastric juice (pH 1.2). This study proposed that this solid dispersion system improved the bioavailability of poorly water-soluble atorvastatin calcium.

• 대한공업교육학회지
• /
• v.31 no.2
• /
• pp.41-63
• /
• 2006

The purpose of this study was to establish and apply 'term learning strategy' for learners whose basic skill, interest, and motivation for learning is lower, and to increase the learned capabilities of subjects' 'industry introduction', required for industrial technical high school students. Another purpose was to identify when the learning strategy established was applied, its affect on how well learners understood terms in a particular unit of material, and, after instruction presented in accordance with 'term learning strategy,' evaluate the ease with which subjects understood the teacher's explanation of the unit of subject, how well they understand the main concepts of the unit of subject, and to what extent the presentation interested and motivated the subjects. The researcher established 'term learning strategy' based on the principles of Garg's "Nine Steps for Events of Instruction." The study included 35 first grade participants purposely selected from 33 classes at 1155 students in K industrial technical highschool. Data was collected via tests and surveys. Results indicated that 'term learning strategy' facilitated thorough understanding of terms and concepts related to the unit of subject, as well as a better understanding of the teacher's explanation and increased interest and motivation in learning. In addition, the "term learning strategy" increased interaction among learners in the instruction setting. Finally, implications of this study and implementation recommendations for this instructional strategy were presented.

• Restorative Dentistry and Endodontics
• /
• v.42 no.1
• /
• pp.9-18
• /
• 2017

Objectives: This study evaluated color differences (${\Delta}Es$) and translucency parameter changes (${\Delta}TPs$) of various computer-aided design/computer-aided manufacturing (CAD/CAM) blocks after immersion in coffee. Materials and Methods: Eight CAD/CAM blocks and four restorative composite resins were evaluated. The CIE $L^{\ast}a^{\ast}b^{\ast}$ values of 2.0 mm thick disk-shaped specimens were measured using the spectrophotometer on white and black backgrounds (n = 6). The ${\Delta}Es$ and ${\Delta}TPs$ of one day, one week, and one month immersion in coffee or water were calculated. The values of each material were analyzed by two-way ANOVA and Tukey's multiple comparisons (${\alpha}=0.05$). The ${\Delta}Es$ after prophylaxis paste polishing of 1 month coffee immersion specimens, water sorption and solubility were also evaluated. Results: After one month in coffee, ${\Delta}Es$ of CAD/CAM composite resin blocks and restorative composites ranged from 1.6 to 3.7 and from 2.1 to 7.9, respectively, and ${\Delta}TPs$ decreased. The ANOVA of ${\Delta}Es$ and ${\Delta}TPs$ revealed significant differences in two main factors, immersion periods and media, and their interaction except for ${\Delta}Es$ of TEL (Telio CAD, Ivoclar Vivadent). The ${\Delta}Es$ significantly decreased after prophylaxis polishing except GRA (Gradia Block, GC). There was no significant correlation between ${\Delta}Es$ and water sorption or solubility in water. Conclusions: The ${\Delta}Es$ of CAD/CAM blocks after immersion in coffee varied among products and were comparable to those of restorative composite resins. The discoloration of CAD/CAM composite resin blocks could be effectively removed with prophylaxis paste polishing, while that of some restorative composites could not be removed.

• Polymer(Korea)
• /
• v.37 no.6
• /
• pp.744-752
• /
• 2013

The miscibility between poly(L-lactide) (PLLA) and poly(methyl methacrylate) (PMMA) was investigated using thermal analyses for the purpose of developing birefringence-free material at oriented state. The effect of methyl acrylate (MA) units as comonomer of PMMA on the miscibility was also studied. All the blends prepared in this study show composition-dependent single $T_g$'s between those of blend components and high transparency over the visible region, indicating the miscibility at molecular level and no discernible effect of MA units on it. No phase separation was observed at elevated temperature of $280^{\circ}C$, higher than the degradation of PLLA and PMMA. The interaction energy density in PLLA/PMMA blends with 17 mol% of MA was measured to be $-0.74J/cm^3$ from the equilibrium melting temperature depression based on the Hoffman-Weeks method. The blends show zero-${\Delta}$n behavior at a specific mixing ratio and the drawing ratio of 3 due to compensation of intrinsic orientation birefringence. Birefringence dispersion of PLLA/PMMA5 blends was also measured to examine the possibility for quarter-wave plates or polarizer protective films.

• Nuclear Engineering and Technology
• /
• v.50 no.2
• /
• pp.268-279
• /
• 2018

The ALCYONE multidimensional fuel performance code codeveloped by the CEA, EDF, and AREVA NP within the PLEIADES software environment models the behavior of fuel rods during irradiation in commercial pressurized water reactors (PWRs), power ramps in experimental reactors, or accidental conditions such as loss of coolant accidents or reactivity-initiated accidents (RIAs). As regards the latter case of transient in particular, ALCYONE is intended to predictively simulate the response of a fuel rod by taking account of mechanisms in a way that models the physics as closely as possible, encompassing all possible stages of the transient as well as various fuel/cladding material types and irradiation conditions of interest. On the way to complying with these objectives, ALCYONE development and validation shall include tests on $PWR-UO_2$ fuel rods with advanced claddings such as M5(R) under "low pressure-low temperature" or "high pressure-high temperature" water coolant conditions. This article first presents ALCYONE V1.4 RIA-related features and modeling. It especially focuses on recent developments dedicated on the one hand to nonsteady water heat and mass transport and on the other hand to the modeling of grain boundary cracking-induced fission gas release and swelling. This article then compares some simulations of RIA transients performed on $UO_2$-M5(R) fuel rods in flowing sodium or stagnant water coolant conditions to the relevant experimental results gained from tests performed in either the French CABRI or the Japanese NSRR nuclear transient reactor facilities. It shows in particular to what extent ALCYONE-starting from base irradiation conditions it itself computes-is currently able to handle both the first stage of the transient, namely the pellet-cladding mechanical interaction phase, and the second stage of the transient, should a boiling crisis occur. Areas of improvement are finally discussed with a view to simulating and analyzing further tests to be performed under prototypical PWR conditions within the CABRI International Program. M5(R) is a trademark or a registered trademark of AREVA NP in the USA or other countries.

• Archives of Plastic Surgery
• /
• v.37 no.4
• /
• pp.469-472
• /
• 2010

Purpose: Aplasia Cutis Congenita (ACC) is a rare disease characterized by the focal defect of the skin at birth, frequently involving scalp, but it may affect any region of the body. There are no etiology known but some conditions such as intrauterine vascular ischemia, amniotic adherences and viral infections are associated. The ideal treatment for the ACC is not known. Superficial and relatively small sized defects (< $3{\times}5\;cm$) may heal spontaneously and large defects related with risks of infection and bleeding may require aggressive surgical treatment. Hyalomatrix$^{(R)}$ is a bilayer of an esterified hyaluronan scaffold beneath a silicone membrane. It has been used as a temporary dermal substitute to cover deep thickness skin defect and has physiological functions derive from the structural role in extracellular matrix and interaction with cell surface receptor. This material has been used for the wound bed pre-treatment for skin graft to follow and especially in uncooperative patient, like a newborn, this could be a efficient and aseptic way of promoting granulation without daily irritative wound care. For this reason, using Hyalomatrix$^{(R)}$ for the treatment of ACC was preferred in this paper. Methods: We report a case of a newborn with ACC of the vertex scalp and non-ossified partial skull defect. The large sized skin and skull defect ($6{\times}6\;cm$) was found with intact dura mater. No other complications such as bleeding or abnormal neurologic sign were accompanied. Escharectomy was performed and Hyalomatrix$^{(R)}$ was applied for the protection and the induction of acute wound healing for 3 months before the split-thickness skin graft. During the 3 months period, the dressing was renewed in aseptic technique for every 3 weeks. The skin graft was achieved on the healthy granulation bed. Results: The operative procedure was uneventful without necessity of blood transfusion. Postoperative physical examination revealed no additional abnormalities. Regular wound management was performed in out-patient clinic and the grafted skin was taken completely. No other problems developed during follow-up. Conclusion: Hyalomatrix$^{(R)}$ provides protective and favorable environment for wound healing. The combination of the use of Hyalomatrix$^{(R)}$ and the skin graft will be a good alternative for the ACC patients with relatively large defect on vertex.

• Communications of Mathematical Education
• /
• v.35 no.4
• /
• pp.475-504
• /
• 2021

This study is a study that developed class materials that can be applied directly to classes by field teachers in consideration of ' research on the development is valuable as a field support study.', 'In material development, organizing data centering on the knowledge composition and inquiry activities of characters related to the mathematics concept can help develop class materials', and 'The fact that the development of subject data for has been insufficient'. To this end, this study went through the procedure of 'establishing a data development plan, data development, verifying field teachers on development data, verifying subject experts on development data, and developing final data reflecting verification opinions.' Therefore, based on the 1st 50 minutes reflecting the task exploration model, it was possible to develop class materials for the 3rd time. In this study, development data were presented with a 17-week curriculum plan, a class guidance plan that presents teacher-student interaction, and a task development form that students fill out and submit in class. This study was developed with the developed data in mind to be applied to actual classes. Therefore, a follow-up study is needed to apply the developed data to actual classes and analyze the results.

• Journal of the Korean earth science society
• /
• v.42 no.3
• /
• pp.296-310
• /
• 2021

El Niño is a typical ocean and atmospheric interaction phenomenon that causes climate variability on a global scale, so it has been used as a very important teaching and learning material in the field of earth science. This study summarized the distribution and dynamics of the equatorial current system. The variability of the equatorial current system during the El Niño period and the associated misconceptions were also investigated. The North Equatorial Current, South Equatorial Current, and Equatorial Under Current significantly weaken during El Niño years. However, the variability of the North Equatorial Counter Current (NECC) during the El Niño period cannot be generalized because the NECC shows southward movement with weakening in the northern area and strengthening in the southern area, along its central axis. In the western Pacific, the NECC is further south during El Niño years, and thus, it has an eastward flow in the equatorial western Pacific. Our analysis of a mass media science article, a secondary school exam, and a survey for incumbent teachers confirmed disparate ideas about the equatorial current system's variability during El Niño periods. This is likely due to inaccurate interpretations of the existing El Niño schematic diagram and insufficient understanding of the equatorial current and wave dynamics.

• Journal of the Korean Society of Radiology
• /
• v.13 no.2
• /
• pp.253-260
• /
• 2019

Radiation dose enhancement is a method of increasing the cross section of interaction, thus increasing the deposited dose. This can contribute to linear energy transfer, LET and relative biological effectiveness, RBE. Previous studies on dose enhancement have been mainly focused on X, ${\gamma}-rays$, but in this study, the dose enhancement was analyzed for proton using Monte Carlo simulation using MCNP6. Based on the mathematical modeling method, energy spectrum and relative intensity of spread out Bragg-peak were calculated, and evaluated dose enhancement factor and dose distribution of dose enhancement material, such as aurum and gadolinium. Dose enhancement factor of 1.085-1.120 folds in aurum, 1.047-1.091 folds in gadolinium was shown. In addition, it showed a decrease of 95% modulation range and practical range. This may lead to an uncertain dose in the tumor tissue as well as dose enhancement. Therefore, it is necessary to make appropriate corrections for spread out Bragg-peak and practical range from mass stopping power. It is expected that Monte Carlo simulation for dose enhancement will be used as basic data for in-vivo and in-vitro experiments.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.938-943
• /
• 2018

Thin nano-sized fibres were prepared by an electrospinning method. The spinning appratus consisted of pump for polymer injection, nozzle and nozzle rotus, and an aluminum plate collected the polymer fibers. Its surface was chemically modified for selective improved adsorption of carbon monoxide at indoor level. The chemical activation enabled to form the fibres 250-350 nm in thickness with pore sizes distributed between 0.6 and 0.7 nm and an average specific surface area of $569m^2/g$. The adsorption capacities of pure (100%) and indoor (0.3%) $CO_2$, of which level frequently appears, at the ambient condition were improved from 1.08 and 0.013 to 2.2 and 0.144 mmol/g, respectively. It was found that the adsorption amount of $CO_2$ adsorbed by the chemically activated carbon nanofiber prepared through chemical activation would vary depending on the ratio of specific surface area and micropores. In particular, chemical interaction between adsorbent surface and gas molecules could enhance the selective capture of weak acidic $CO_2$.