• Journal of Trauma and Injury
• /
• 제32권4호
• /
• pp.202-209
• /
• 2019

Purpose: Cranioplasty (CP) is often required for survival after decompressive craniectomy. Several materials, including autologous bone and various artificial materials, have been introduced for CP, but it remains unclear which material is best for CP. This study aimed to explore differences in complications between patients who underwent CP using an autologous bone flap versus a three-dimensional (3D) titanium mesh and to identify significant risk factors for post-CP complications. Methods: In total, 44 patients were enrolled in this study and divided into two groups (autologous bone vs. 3D titanium mesh). In both groups, various post-CP complications were evaluated. Through a comparative analysis, we aimed to identify differences in complications between the two groups and, using binary logistic analysis, to determine significant factors associated with complications after CP. Results: In the autologous bone flap group, there were three cases of surgical infection (3/24, 12.5%) and 11 cases of bone flap resorption (BFR) (11/24, 45.83%). In the 3D titanium mesh group, there was only one case of surgical infection (1/20, 5%) and 11 cases of various complications, including mainly cosmetic issues (11/20, 55%). A subgroup risk factor analysis of CP with an autologous bone flap showed no risk factors that predicted BFR with statistical significance, although a marginal association was found between larger bone flaps and BFR (odds ratio [OR]=1.037, p=0.090). In patients treated with a 3D titanium mesh, multivariate analysis revealed that only the existence of a ventriculo-peritoneal shunt system was strongly associated with overall post-CP complications (OR=18.66, p=0.021). Conclusions: Depending on which material was used, different complications could occur, and the rate of complications was relatively high in both groups. Hence, the material selected for CP should be selected based on individual patients' conditions.

• 자원ㆍ환경경제연구
• /
• 제23권1호
• /
• pp.91-132
• /
• 2014

본 논문은 한국, 미국, 영국의 제조업 및 전기 가스 수도사업에서 ICT 확산이 노동 및 에너지 수요에 어떠한 영향을 미치는지 연구하였다. 제조업에 대해서는 ICT 자본, 비ICT 자본, 노동, 전기, 연료, 재료를 생산요소로 가정하고, 전기 가스 수도사업에 대해서는 ICT 자본, 비 ICT 자본, 노동, 에너지 재료를 생산요소로 가정하여 요소 간 대체관계를 분석하였다. 모리시마 대체탄력성 추정결과 및 요소의 상대적 가격변화를 고려할 때, 3개 국가의 제조업 및 전기 가스 수도사업에서 ICT 자본은 노동을 대체하여 노동 수요를 감소시키는 것으로 나타났다. ICT 자본에 비해 전기 및 연료의 가격증가율이 높은 미국과 영국의 제조업에서 ICT 자본은 전기 및 연료를 대체하여 에너지 수요를 감소시키는 것으로 나타났다. 한국의 제조업에서 ICT 자본과 전기 및 연료가 대체관계에 있으나, 요소의 상대적 가격변화를 고려하면 ICT 자본이 에너지 수요 감소에 기여했다고 보기 어렵다. 3개 국가의 전기 가스 수도사업에서 ICT 자본은 에너지 재료를 거의 탄력적으로 대체하여 에너지 재료 수요를 감소시키는 것으로 분석되었다.

• Design & Manufacturing
• /
• 제12권2호
• /
• pp.34-39
• /
• 2018

The biggest topics in the automobile industry are light weightening and fuel efficiency improvement. There's a lot of research going on. It is focused on light weight materials. Light weight material is seen as the best way to reduce fuel consumption and to solve the problem of environmental pollution and resource depletion. For the light weight materials, new materials such as aluminum, magnesium, and carbon-hardening materials can be found. Research on the joining techniques of dual materials, improvement of material properties by improving the method of manufacture of existing materials, and studies on ultra-high strength steel sheets are expected to take up the most weight in lightweight materials. As the strength of the ultra-high strength steel sheets increases during forming, it is difficult to obtain dimensional precision due to the increase in elastic restoring force compared to mild or high strength steel sheets. Spring back is known to be affected by a number of factors due to poor plastic molding, and can be divided into the effects of the material spraying and the process. The study on the plasticitic variables were studied as plasticitic factors that can be controlled by a part company. Tensile testing of ultra-high strength materials was conducted to derive properties for plasticitic analysis and to analyze spring back with two factors controlling the height of the bead and blank holding force by adding tensile force and controlling the flow rate.

• 한국실내디자인학회논문집
• /
• 제15권6호
• /
• pp.19-26
• /
• 2006

This subject is about the research of Shanghai Art Deco in the aspect of architectural decoration and seek to offers an examination and analysis of the characteristics related to the Art Deco design, which appeared and dominated the field of design from 1910s to 1904s in Shanghai. Study method is a theoretical consideration of reference and gathering data through field trip. In order to carry out this subject, this study will research following factors. First, factors related to Art Deco such as the period of origin, background, spirit, aesthetics, design characteristics. This is followed by the influence of Art Deco movement begun in 1925. Second, the background of Shanghai Art Deco architecture style was studied. Third, the case studies of Shanghai Art Deco Architecture and interior decoration were researched by the expressive factors which were divided by style, form, material and color. As a result early style had compradore style about 1900, later reactionism prevailed of 1920 affected by European Art Deco. Skyscraper style was built and architecture developed with racial characteristics. It has vertical and streamline form of typical Art Deco and strengthen geometrical motive in architectural expression. It appeared naturally and has the contrast of different material in material expression. It has effect on strong color as using highborn and brilliant color in color expression. They appeared chinese national spirit by using 'ot painting' in western oriented furniture. The purpose of such an examination is to classify, understand and validate Shanghai artistic and socio-cultural heritage in order to better appreciate the life philosophy of Shanghai and re-discover their basic roots. Though it began as a Western cultural movement, it is the purpose of this study to discover the inherent orientalism in its basic formative spirit.

• 복식문화연구
• /
• 제29권3호
• /
• pp.307-327
• /
• 2021

This study analyzed the effects of fashion consumers' moral identity and empathy propensity on ethical consumption attitude and donation behavior, and the effect of ethical consumption attitude on donation behavior. The survey was conducted on consumers over the 20s who experienced the donation of fashion products, 384 responses were used for data analysis. The result showed that the internality and symbolism of moral identity had a positive effect on ethical consumption attitudes. The all factors of empathy propensity positively affected eco-friendly oriented consumption, and cognitive empathy and social empathy positively affected boycott oriented consumption. The cognitive empathy, social empathy and relational empathy positively affected community oriented consumption and practice oriented consumption. Furthermore, social empathy and relational empathy positively affected recycling oriented consumption. The eco-friendly, boycott, community, and recycling oriented consumption positively affected temporal donation. The all factors of ethical consumption attitude positively affected emotional donation, and eco-friendly, community, recycling, and practice oriented consumption positively affected material donations. The internality and symbolism of moral identity positively affected temporal and emotional donation, and the symbolism except internality positively affected material donation. The cognitive empathy, social empathy and relational empathy positively affected the temporal donation and material donation. In addition, the all factors of empathy propensity positively affected emotional donation. The results of this study will contribute to the ethical product strategy, marketing, and sustainable development of the fashion industry.

• 한국컴퓨터정보학회논문지
• /
• 제26권7호
• /
• pp.29-36
• /
• 2021

본 논문에서는 딥러닝 모델을 이용하여 모바일 기기의 심전도 신호 측정 데이터를 분류한다. 비정상 심장박동을 높은 정확도로 분류하기 위해 딥러닝 모델의 구성 요소 세 가지를 선정하고 요소의 조건 변화에 따른 분류 정확도를 비교한다. 심전도 신호 데이터의 특징을 스스로 추출할 수 있는 CNN 모델을 적용하고 모델을 구성하는 모델의 깊이, 최적화 방법, 활성화 함수의 조건을 변경하여 총 48개의 조합의 성능을 비교한다. 가장 높은 정확도를 보이는 조건의 조합을 도출한 결과 컨볼루션 레이어 19개, 최적화 방법 SGD, 활성화 함수 Mish를 적용하였을 때 정확도 97.88%로 모든 조합 중 가장 높은 분류 정확도를 얻었다. 이 실험에서 CNN을 활용한 1-채널 심전도 신호의 특징 추출과 비정상 박동 검출의 적합성을 확인하였다.

• Design & Manufacturing
• /
• 제14권1호
• /
• pp.22-29
• /
• 2020

The analysis was carried out using the press molding analysis program by applying six parameters such as material type change, material thickness, friction coefficient, r_p, r_d and blank holder pressure. As a result of CAE analysis of the soft material DC04 and the relatively hard material HX300LAD, the thickness of the punch R part of the soft material was significantly reduced. The flange portion is greatly increased in thickness in the hard material by the compression action. As a result of considering the deformation amount of 0.6mm, 1.0mm, 1.5mm according to the material thickness, the influence of the thickness is considered to be very small. In case of the material thickness of 0.6mm, the rate of change increases due to the deep drawing depth relative to the material thickness. The sizes of the punches R and die R have the greatest influence on the change in thickness of the material in drawing molding, the smaller the punch R, the thinner the edges of the product, The larger the R of the die, the greater the material thickness of the flange portion. As the coefficient of friction and the blank holder pressure increase, the frictional force of the flange portion increases, which increases the radial force in the drawing process and increases the thickness change of the flange portion.

• Journal of Biosystems Engineering
• /
• 제39권3호
• /
• pp.235-243
• /
• 2014

Purpose: The aim of this study was to prepare and evaluate a natural material extracted from germinated brown rice (GBR). Herein, we evaluated whether the natural material could positively activate the biological effects seen during bone formation, including enhancement of metabolic activity, osteogenesis, and the expression of vascular endothelial growth factor (VEGF), one of the growth factors in human osteoblast-like cells. Methods: The natural material was created by a hot water extraction process after being soaked for 2~3 days in tap water and dried at $50^{\circ}C$. The material was characterized using field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and Fourier transformed infrared (FTIR) spectroscopy. The biological behaviors of the material were also investigated; we performed tests to assess cell cytotoxicity, metabolic activity, osteogenic markers related to bone formation, and VEGF. Results: The EDX, XRD, and FTIR results for the natural material indicated the presence of organic compounds. The natural material caused positive increases in cell metabolic activity and mineralized bone formation without cytotoxicity. The protein levels in the extract for the $6.25{\mu}g/mL$, $12.25{\mu}g/mL$, $25{\mu}g/mL$, $50{\mu}g/mL$, and $100{\mu}g/mL$ groups were significantly different from that for the control. Conclusions: The GBR-based natural material was easy to prepare and had characteristics of a potential biomaterial. The biocompatibility of this natural material was evaluated using in vitro techniques; our findings indicate that this novel material is promising for agricultural and biological applications.

• 한국분말재료학회지
• /
• 제10권5호
• /
• pp.349-352
• /
• 2003

This study examined the correlation of various operational factors including reaction temperature and the quantity of reductant and diluent with the characteristics of powder using $K_2$ TaF$_{7}$ as feed materials, Na as a reductant and KCl/KF as a diluent. Also to control the particle size and shape, external supply system developed, it can provide a feed material and a reductant at a fixed quantity and evaluated the characteristics of tantalum powder. When the external supply system was applied instead of the batch type process that charges feed material, reductant and diluent at the same time, it was possible to induce regular reduction reaction between feed material and reductant, which increased the recovery rate and reduced the mixture of impurities. In particular, the application of the external supply system enabled the control of reaction temperature and reaction speed according to the feeding rate of feed material during reduced reaction, and resultantly it enabled the manufacturing of granular-shaped powder with a regular granularity of 2∼3 ${\mu}{\textrm}{m}$ and purity of 99.5%.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.173-174
• /
• 2009

본 연구는 최근 초고층 건축물의 등장으로 인하여 기존의 토목 구조물에서만 사용되었던 축소량에 대하여 검토가 시작되었다. 이러한 수직부재에 대한 축소량의 검토는 기본적으로 콘크리트가 받는 하중, 재료특성 등으로 발생되는 변형을 기본으로 하고 있다. 하지만 이러한 콘크리트가 받는 작용 인자나 특성을 가지고 계수 산정을 통한 축소량 해석을 하고 있지만, 각각의 재료시험적인 측면에서의 분석을 다소 미미하게 되고 있다. 따라서 본 연구에서는 수직부재 즉 기둥축소량 보정을 위한 기본적인 재료시험항목에 대하여 각각을 분석하여 축소량 보정을 위한 계수산정전 재료시험의 신뢰성을 파악하고 이에 대한 성능적인 검토를 하고자 하는데 목적이 있다.