• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.2
• /
• pp.197-206
• /
• 2023

Recently, the international community, including the International Maritime Organization (IMO), has strengthened regulations on air pollution emissions of ships, and eco-friendly ships are actively being developed to reduce exhaust gas emissions. Among them, rotor sail (RS), a wind-assisted ship propulsion system, is attracting attention again. RS is a cylindrical device installed on the ship deck, that generates hydrodynamic lift using a magnus effect. This is a next generation eco-friendly auxiliary propulsion technology, and Enercon company, which developed RS-applied ships, announced that fuel savings of more than 30% are possible. In this study, optimal installation conditions such as RS spacing and arrangement type were selected when multiple RSs were installed on ships. AR=5.1, SR=1.0, and D_e/D was fixed at 2.0 according to the RS arrangement, and the wind direction was considered only for the unidirectional +y-axis. Regarding arrangement conditions, five conditions were set at 3D intervals in the +x-axis direction from 3D to 15D and five conditions in the +y-axis direction from 5D to 25D. C_L, C_D and aerodynamic efficiency (C_L/C_D) were compared according to the square(□) and diamond(◇) shape arrangements. Consequently, the effect of RS on the longitudinal distance was not significantly different. However, in the case of RS flow characteristics according to the transverse distance, the interaction effect of RS was the greatest when the two RSs almost matched the wind direction. In the case of the RS flow characteristics according to the arrangement, notably, when the wind blew in the forward (0°) direction, the diamond (◇) arrangement was least affected by the backward flow between RSs.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.4
• /
• pp.193-202
• /
• 2006

The Consultative Meeting of the Convention on the Prevention of Marine Pollution by Dumping of Wastes and other matter, 1972 (London Convention 1972) has requested to International Maritime Organization (IMO) Marine Environmental Protection Committee to collaborate and help clarify a boundary issue between International Convention for the Prevention of Pollution from Shops, 1973 as modified by the Protocol of 1978 (MARPOL) and the London Convention concerning 'dumping' versus 'discharges' during normal operations of ships in 2004, and subsequently established a Joint London Convention/MEPC Correspondence Group. The Contracting Parties to London Convention expressed their environmental concerns on the broad interpretation of the "cargo-associated wastes" by the States, which could be discharged by ships under MARPOL. Regulatory regimes for the cargo residues appear to vary among states. Some countries require fur ships to discharge their cargo wastes into the port reception facility and IMO also recommends doing so. This paper examines the related current national and international legal texts for the regulation of disposal of wastes from ships in order to analyze the current global concern on the marine pollution associated with waste discharge during operations of ships. In particular, we attempt to evaluate the likely marine environmental consequences arising from the disposal of cargo residue using an hypothetical case for the coal cargo residue among bulk cargos in this paper, since location, magnitude and frequency of the discharge of coal cargo residues into the sea adjacent to Korean Peninsula are not readily available. The cargo residues may be discharged to the sea according to MARPOL 73/78; however, its marine environmental consequences can be significant depending upon the characteristics and amounts of wastes to be discharged. Also the public tolerance of the environmental consequences would be widely different among nations. Multilateral environmental agreements, in general, more strictly apply their rules if there are other options to disposal at sea, i.e. port reception facility in this case. Therefore, port reception facilities for the wastes generated by ships are recommended to be further constructed in major national ports in order to reduce the risk of environmental damages during the operations of ships.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.3
• /
• pp.223-233
• /
• 2015

In order to evaluate the pollution of heavy metals in offshore surface sediments around shipyards in Korea, surface sediment samples were collected at eleven stations around four major shipyards located in the southeastern coast of Korea in summer 2010 and nine kinds of heavy metals such as copper(Cu), zinc(Zn), cadmium(Cd), lead(Pb), chrome(Cr), arsenic(As), mercury(Hg), iron(Fe) and aluminum(Al) in sediments were analyzed. The concentrations of Cu at all sampling stations were in the range of 47.10~414.96 mg/kg and exceeded TEL(Threshold Effects Level) 20.6 mg-Cu/kg of Korean marine environmental standards for offshore sediments and ERL(Effect Range-Low) 34.0 mg-Cu/kg. The concentrations of Cu at seven stations around four shipyards were 65.18~414.96 mg/kg and exceeded PEL(Probable Effects Level) 64.4 mg-Cu/kg of Korean marine environmental standards for offshore sediments. The concentration of Cu at one station around B-shipyard was 414.96 mg/kg and exceeded ERM(Effect Range-Median) 270.0 mg-Cu/kg. The concentrations of Zn at all stations were in the range of 135.09~388.79 mg/kg which exceeded ERL 150.0 mg-Zn/kg. The concentrations of Zn at seven stations around four shipyards were 157.57~388.79 mg/kg and exceeded PEL 157.0 mg-Zn/kg. The concentration of Zn at one station around B-shipyard was 388.79 mg/kg and was approaching ERM 410.0 mg-Zn/kg. The concentrations of Cd at all stations were in the range of 0.11~0.54 mg/kg and were below TEL 0.75 mg-Cd/kg and ERL 1.2 mg-Cd/kg. The concentrations of Pb at all stations were in the range of 18.04~105.62 mg/kg. The concentrations of Pb at two stations around B-shipyard were 73.87~105.62 mg/kg which exceeded TEL 44.0 mg-Pb/kg and ERL 46.7 mg-Pb/kg, and were below PEL 119.0 mg-Pb/kg and ERM 218.0 mg-Pb/kg. The concentrations of Cr at all stations were in the range of 51.26~85.39 mg/kg. The concentration of Cr at one station around B-shipyard was 85.39 mg/kg and exceeded ERL 81.0 mg-Cr/kg. The concentrations of As at all stations were in the range of 8.70~22.15 mg/kg which exceeded ERL 8.2 mg-As/kg and were below ERM 70.0 mg-As/kg. The concentrations of As at eight stations around A-shipyard, B-shipyard and D-shipyard were 14.93~22.15 mg/kg which exceeded TEL 14.5 mg-As/kg and were below PEL 75.5 mg-As/kg. The concentrations of Hg at all stations were in the range of 0.02~0.35 mg/kg. The concentrations of Hg at three stations around A-shipyard were 0.11~0.13 mg/kg which were almost equal to TEL 0.11 mg-Hg/kg. Those at two stations around B-shipyard were 0.27~0.35 mg/kg which exceeded TEL 0.11 mg-Hg/kg and ERL 0.15 mg-Hg/kg, and were below PEL 0.62 mg-Hg/kg and ERM 0.71 mg-Hg/kg. The concentrations of Fe and Al at all stations were in the range of 2.90 3.66 % and 3.12 6.80 %, respectively. These results imply that heavy metals such as copper, zinc, lead, arsenic and mercury were likely to be transferred to marine environment from shipyards, especially from B-shipyard.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.4
• /
• pp.239-247
• /
• 2013

Recently renewable energy such as offshore wind energy takes a higher interest due to the depletion of fossil fuel and the environmental pollution. This paper deals with multi-body dynamics (MBD) analysis technique for offshore wind turbine system considering aerodynamic loads and Thevenin equation used for determination of electric generator torque. Dynamic responses of 5MW offshore wind turbine system are evaluated via the MBD analysis, and the system is the horizontal axis wind turbine (HAWT) which generates electricity from the three blades horizontally installed at upwind direction. The aerodynamic loads acting on the blades are computed by AeroDyn code, which is capable of accommodating a generalized dynamic wake using blade element momentum (BEM) theory. In order that the characteristics of dynamic loads and torques on the main joint parts of offshore wind turbine system are simulated similarly such an actual system, flexible body modeling including the actual structural properties are applied for both blade and tower in the multi-body dynamics model.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.6
• /
• pp.681-688
• /
• 2020

Approximately 6,000 chemicals are transported through the sea, including hazardous and noxious substances (HNS), which cause marine pollution and are harmful to marine life. The HNS discharged into the sea during the maritime transportation process undergoes physical and chemical changes on the sea surface and in seawater, and some types of HNS sink and are deposited on the seabed. The HNS deposited on the seabed adversely affects the benthic ecosystem, and hence, it is desirable to detect, treat, and recover the HNS on the seabed. Therefore, this study was conducted to analyze the performance requirements that should be considered as the top priority when developing a mechanical system for recovering the HNS deposited on the seabed. Various types of existing dredging devices used for collecting and recovering pollutants from river beds and seabeds were investigated, and 10 performance indices for the mechanical devices were selected. The new performance requirements for the development of the seabed-deposited HNS recovery system were proposed using performance indices. By considering the depth of water in domestic seaports, some of the performance requirements of the mechanical system for recovering deposited HNS from the seabed were obtained as follows: production rate (50-300 ㎥/hr), maximum operation depth (50 m), sediment type (most forms), percentage of solids (10 % or higher), horizontal operating accuracy (±10 cm), limiting currents (3-5 knots). These performance requirements are expected to be useful in the conceptual and basic design of mechanical systems for recovering seabed-deposited HNS.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.6
• /
• pp.689-697
• /
• 2020

Hazardous and noxious substances (HNS) may cause maritime incidents during marine transportation, which are liable to lead to a large amount of spillage or discharge into the sea. The damage to the marine environment caused by the HNS spill or discharge is known to be much greater than the damage caused by oil spill. Particularly dangerous is HNS, which is deposited or buried in the seabed, as it can damage the organisms that live on, in, and near the bottom of the sea, the so-called "benthos," forming the benthic ecosystem. Therefore, it is vital that the HNS deposited on the seabed be recovered. In order to do so, procedures and equipment are required for accurate detection, stabilization treatment, and recovery of HNS in subsea sediment. Thus, when developing a mechanical recovery system, the performance requirements should be selected using performance indices, and the conceptual design of the mechanical recovery system should be based on performance requirements decided upon and selected in advance. Therefore, this study was conducted to arrive at a conceptual design for a mechanical recovery system for the recovery of HNS deposited on the seabed. In the design of the system, based on the fundamental scenario, the method of suction foundation with the function of self enclosing was adopted for recovering the HNS sediment in the subsea sediment. The mechanical recovery system comprises the suction foundation, pollution prevention, a pump system, control system, monitoring device, location information device, transfer device, and tanks. This conceptual design is expected to be reflected and used in the basic design of the components and shapes of the mechanical recovery system.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.13 no.2
• /
• pp.99-104
• /
• 2010

The purpose of this study is to develop Sewage Treatment Plant that treat sewage which occurred in ship using fixed media method and to consider applicable to the Pilot Scale device of the STP regulations in MLTM(Ministry of Land, Transport and Maritime Affairs) and MEPC(Marine Environment Protection Committee). In test results, pH geometric mean was 7.68, $BOD_5$(Biochemical Oxygen Demand) geometric mean was 7.28 mg/l, $COD_{cr}$(Chemical Oxygen Demand) geometric mean was 48.39 mg/l, TSS(Total Suspended Solid) geometric mean was 18.00/l, Residual chlorine geometric mean was 0.19 mg/l, and E. coli geometric mean was 1CFU/100 ml. In addition, about 97.4% of $BOD_5$ was reduced, the $COD_{cr}$ reduction averaged 96.4%and the TSS reduction averaged 97.6%. STP have been determined by the MLTM and MEPC regulation of the marine pollution prevention equipment for performance testing product.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.11a
• /
• pp.165-170
• /
• 2005

A basic study for the development of a disk type oil skimmer for a tank lorry, compares via experiments to the oil recovery differences by material between the existing oil skimmer disk and several discs which oil adhesion are possible. The experiment results in this study are summarized as follows: In all the disks, the mass of recovery of bunker-A oil was greater than light oil. In light oil, there was nearly no differences in the mass of oil recovery by disk material, but in the case of bunker A oil, recovery efficiency showed big differences depending on the disk materials. For light oil, the differences in the mass of oil recovery per unit of operation time from the initial time zone were hardly shown. However, the mass of recovery of bunker-A oil linearly increased from the initial operation time in all the disks and the increase shaped a slow moving trend as time went on; therefore, the mass of oil recovery per unit of operation time showed differences depending on time. This result shows that oil viscosity has an effect on the disk recovery efficiency. When comparing the mass of pure oil recovery and the mass of water recovery in the total mass of recovery by bunker-A oil, there was no difference in the mass of oil recovery between the window-aluminum material disk and the disks consisting of other materials, but the mass of water recovery of the former was relatively very small. This shows the most ideal result in view of oil recovery efficiency that considers the mass of water recovery. In conclusion, it was found that aluminum is the most advantageous as the material for tank lorry oil skimmer disk.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.4
• /
• pp.500-507
• /
• 2010

Regard to the global warming, the shipping industries are progressed the dedicated endeavor to reduce greenhouse gas. As the study results of 2009 GHG study team, the $CO_2$ emission of shipping industries exceeded slightly 1.0 billion ton during one year(2007) and it is 3.3% of total $CO_2$ amount exhausted from all industries. This paper are introduced the energy efficiency design index / operation indicator monitoring system(EDiMS) which matched with EVAMOS software released by the dynamics laboratory of Mokpo maritime university. EDiMS can continuously be monitored amounts of $CO_2$, NOx, SOx, and PM emitted from ship and it can be applied as the useful tool of the inventory work of air pollution and the ship energy management plan for the mitigation or reduction of ship emission.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.11 no.2 s.23
• /
• pp.103-108
• /
• 2005

For the development of a disk type oil skimmer for a tank lorry, a basic study on comparison of oil recovery performance between disk materials of oil skimmer was conducted. The experiment results are summarized as follows: In all the disks, the volume of recovery of bunker-A oil was greater than diesel oil. In light oil, there was nearly no differences in the volume of oil recovery by disk material, but in the case of bunker A oil, recovery efficiency showed big differences depending on the disk materials. For diesel oil, the differences in the volume of oil recovery per unit of operation time from the initial time zone were hardly shown. However, the volume of recovery of bunker-A oil linearly increased from the initial operation time in all the disks and the increase showed a slew moving trend as time. went on; therefore, the volume of oil recovery per unit of operation time showed differences depending on time. This result shows that oil viscosity has an effect on the disk recovery efficiency. When comparing the mass of pure oil recovery and the volume of water recovery in the total mass of recovery by bunker-A oil, there was no difference in the volume of oil recovery between the window-aluminum material disk and the disks consisting of other materials, but the volume of water recovery of the former was relatively very small This shows the most ideal result in view of oil recovery efficiency that considers the volume of water recovery. In conclusion, it was found that aluminum is the most advantageous as the material for tank lorry oil skimmer disk.