• International Journal of Naval Architecture and Ocean Engineering
• /
• v.2 no.3
• /
• pp.132-138
• /
• 2010

In the present study, the real-time monitoring system is developed based on the wireless sensor network (WSN) and power line communication (PLC) employed in the 3,000-ton-class training ship. The WSN consists of sensor nodes, router, gateway and middleware. The PLC is composed of power lines, modems, Ethernet gateway and phase-coupler. The basic tests show that the ship has rather good environments for the wired and wireless communications. The developed real-time monitoring system is applied to recognize the thermal environments of main-engine room and one cabin in the ship. The main-engine room has lots of heat sources and needs careful monitoring to satisfy safe operation condition or detect any human errors beforehand. The monitoring is performed in two regions near the turbocharger and cascade tank, considered as heat sources. The cabin on the second deck is selected to monitor the thermal environments because it is close to the heat source of main engine. The monitoring results of the cabin show the thermal environment is varied by the human activity. The real-time monitoring for the thermal environment would be useful for the planning of the ventilation strategy based on the traces of the human activity against inconvenient thermal environments as well as the recognizing the temperature itself in each cabin.

• Journal of Navigation and Port Research
• /
• v.36 no.1
• /
• pp.1-7
• /
• 2012

A concept of the "e-Navigation" was introduced in 2005 and implementation strategies are under way by IMO/IALA in the maritime safety area. Specially VTS is an important maritime traffic monitoring and aids to navigation system which is aims to improve safety, navigation efficiency and protect the marine environment. The demand of the inter-VTS networking has been increased and standardization is underway for realization of shore side collaboration for maritime safety in IALA. But there may be security problems in the inter-VTS networks if they have not proper security mechanism. The hacking of realtime ship position and sensitive maritime surveillance information caused a critical accident of vessel, human life and environment by terrorist. This paper aims to design of a secure inter-VTS network structure and related security protocol for secure sharing of sensitive maritime data.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.10
• /
• pp.4002-4014
• /
• 2015

ITU-R M.1842-1, as a well-known specification dedicated to maritime mobile applications, has standardized wireless transmission protocols according to the particular characteristics of a maritime communications scenario. A time division multiple access (TDMA) frame structure, along with modulation schemes to achieve a high data rate, has been described clearly in ITU-R M.1842-1. However, several specification items are still under "to be decided" status, which brings ambiguity to research works. In addition, the current version of ITU-R M.1842-1 is focused mainly on maritime transmissions in open-sea areas, where the cyclic prefix (CP) is set to zero and only 16-QAM is used in the multi-carrier (MC) system. System performance might be dramatically degraded in coastline areas due to the inter-symbol interference (ISI) caused by selective fading. This is because there is a higher probability that the signal will be reflected by obstacles in coastline areas. In this paper, we introduce the transmission resource block (TRB) dedicated to ITU-R M.1842-1 for a ship ad-hoc network (SANET), where the pilot pattern of TRB is based on the terrestrial trunked radio (TETRA). After that, we evaluated SANET performance under the maritime channel model in a coastline area. In order to avoid noise amplification and to overcome the ISI caused by selective fading, several strategies are suggested and compared in the channel estimation and equalization procedures, where the link-level simulation results finally validate our proposals.

• Acta Via Serica
• /
• v.6 no.2
• /
• pp.91-116
• /
• 2021

India has had a rich and diverse textile tradition since the 3rd millennium BCE. The origin of Indian textiles can be traced back to the Harappan period. Owing to the hot and humid climate in most parts of India, cotton has remained India's favourite choice of fabric for normal use. Thus, India is supposed to be the first nation to have grown, woven, and patterned cotton fabrics. Moreover, India is one of the leading cotton-growing countries in the world. The earliest occurrence of cotton thread in India is roughly datable to 4000 BCE and of dyed fabrics to about 2500 BCE. Large numbers of needles and spindle-whorls found in Harappa and other early historic sites in India reveal the prosperous state of textile production and its trade in the early period. The textile producers used a wide range of skills to process raw materials and make regionally idiosyncratic dyes, weaves, prints, and embroideries. Additionally, the silk from wild indigenous forms of silkworms was known in the Indian sub-continent roughly contemporary with the earliest clear archaeological evidence for silk in China. The analysis of thread fragments found inside a copper bangle and ornament from Harappa and steatite beads from Chanhu-daro, have yielded silk fibers dating to 2500-2000 BCE. Apart from other products, cotton and silk textiles were important export materials from India right from the Harappan period. Actually, the sea-borne trade had played an important role in the economic growth and prosperity of the Harappan civilization. Several ancient seaports in the entire coastline of India played a vital role in the maritime trade during the Harappan period and cotton and silk textiles of Indian origin have been found in various countries. The contemporary writings and epigraphy have also attested to the vast maritime trade network of India and the export of textile materials. The paper discusses in detail the origin and development of cotton and silk textile production in India through the ages and its role in maritime trade networks.

• Journal of Navigation and Port Research
• /
• v.47 no.6
• /
• pp.324-330
• /
• 2023

Aids to navigation, which provide information about a ship's position, direction, and the location of obstacles, are crucial for uninterrupted maritime services. This study aimed to analyze accidents involving aids to navigation that resulted in service disruptions and identify the key factors associated with these accidents. Aids to navigation accident data from 2000 to 2022 were utilized to achieve this. We categorized accidents by accident type, cause, region, season, and type of navigation aid and established a network through correlation analysis. Bayesian networks based on aids to navigation accidents were assigned prior probabilities, and the factors that increased the probability of accidents for different types of aids to navigation were identified. The findings can be used to infer the causes of unreported aids to navigation accidents and serve as foundational data for the prevention of such accidents.

• Journal of Surface Science and Engineering
• /
• v.57 no.3
• /
• pp.214-220
• /
• 2024

In this study, three-dimensional (3D) networks structure using single-walled carbon nanotubes (SWCNTs) for Si-graphite composite electrode was developed and studied about effects on the electrochemical performances. To investigate the effect of SWCNTs on forming a conductive 3D network structure electrode, zero-dimensional (0D) carbon black and different SWCNTs composition electrode were compared. It was found that SWCNTs formed a conductive network between nano-Si and graphite particles over the entire area without aggregation. The formation of 3D network structure enabled to effective access for lithium ions leading to improve the c-rate performance, and provided cycle stability by alleviating the Si volume expansion from flexibility and buffer space. The results of this study are expected to be applicable to the electrode design for high-capacity lithium-ion batteries.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.7B
• /
• pp.1001-1008
• /
• 2010

In this paper, we propose the dynamic spectrum allocation (DSA) algorithm using spectrum sharing method considering the long-term priority between NOs and service classes for the maritime communication system environment where a ship locates at either near shore (or land) or off-shore. It was shown that the proposed algorithm using spectrum sharing with priorities could deliver better satisfaction ratio (SR) than the fixed allocation schemes, in the context of provision of required bandwidth (or spectrum) for each users. Therefore, we conclude that the proposed DSA with priorities could apply to the maritime communication environment and exploit the under-used (or unused, idle) spectrum of terrestrial communication networks.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.2
• /
• pp.187-194
• /
• 2015

Accurate relative location estimation is a key requirement in indoor localization systems based on wireless sensor networks (WSNs). However, although these systems have applied not only various optimization algorithms but also fusion with sensors to achieve high accuracy in position determination, they are difficult to provide accurate relative azimuth and locations to users because of cumulative errors in inertial sensors with time and the influence of external magnetic fields. This paper based on ultra-wideband positioning system, which is relatively suitable for indoor localization compared to other wireless communications, presents an indoor localization system for estimating relative azimuth and location of location-unaware nodes, referred to as target nodes without applying any algorithms with complex variable and constraints to achieve high accuracy. In the proposed method, the target nodes comprising three mobile nodes estimate the relative distance and azimuth from two reference nodes that can be installed by users. In addition, in the process of estimating the relative localization information acquired from the reference nodes, positioning errors are minimized through a novel modified rounding estimation technique in which Kalman filter is applied without any time consumption algorithms. Experimental results show the feasibility and validity of the proposed system.

• Annual Conference on Human and Language Technology
• /
• 2018.10a
• /
• pp.167-171
• /
• 2018

개체명 인식은 문서에서 인명, 지명, 기관명 등의 고유한 의미를 나타내는 단위인 개체명을 추출하고, 추출된 개체명의 범주를 결정하는 작업이다. 최근 개체명 인식과 관련된 연구는 입력 데이터의 앞, 뒤를 고려하기 위한 Bi-RNNs와 출력 데이터 간의 전이 확률을 이용한 CRFs를 결합한 방식을 기반으로 다양한 변형의 심층학습 방법론이 제안되고 있다. 그러나 대부분의 연구는 입력 단위를 단어나 형태소로 사용하고 있으며, 성능 향상을 위해 띄어쓰기 정보, 개체명 사전 자질, 품사 분포 정보 등 다양한 정보를 필요로 한다는 어려움이 있다. 본 논문은 기본적인 학습 말뭉치에서 얻을 수 있는 문자 기반의 입력 정보와 Multi-Head Attention을 추가한 Bi-GRU/CRFs을 이용한 다국어 개체명 인식 방법을 제안한다. 한국어, 일본어, 중국어, 영어에 제안 모델을 적용한 결과 한국어와 일본어에서는 우수한 성능(한국어 $F_1$ 84.84%, 일본어 $F_1$ 89.56%)을 보였다. 영어에서는 $F_1$ 80.83%의 성능을 보였으며, 중국어는 $F_1$ 21.05%로 가장 낮은 성능을 보였다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.8
• /
• pp.726-732
• /
• 2016

Clustering analysis is widely used in data mining to classify data into categories on the basis of their similarity. Through the decades, many clustering techniques have been developed, including hierarchical and non-hierarchical algorithms. In gene profiling problems, because of the large number of genes and the complexity of biological networks, dimensionality reduction techniques are critical exploratory tools for clustering analysis of gene expression data. Recently, clustering analysis of applying dimensionality reduction techniques was also proposed. PCA (principal component analysis) is a popular methd of dimensionality reduction techniques for clustering problems. However, previous studies analyzed the performance of PCA for only full data sets. In this paper, to specifically and robustly evaluate the performance of PCA for clustering analysis, we exploit an improved FCBF (fast correlation-based filter) of feature selection methods for supervised clustering data sets, and employ two well-known clustering algorithms: k-means and k-medoids. Computational results from supervised data sets show that the performance of PCA is very poor for large-scale features.