• Journal of Navigation and Port Research
• /
• v.28 no.7
• /
• pp.619-627
• /
• 2004

Introduction of wave model, considered the effect of shoaling, refraction, diffraction, partial reflection, bottom friction, breaking at the coastal waters of complex bathymetry, is a very important factor for most coastal engineering design and disaster prevention problems. As waves move from deeper waters to shallow coastal waters, the fundamental wave parameters will change and the wave energy is redistributed along wave crests due to the depth variation, the presence of islands, coastal protection structures, irregularities of the enclosing shore boundaries, and other geological features. Moreover, waves undergo severe change inside the surf zone where wave breaking occurs and in the regions where reflected waves from coastline and structural boundaries interact with the incident waves. Therefore, the application of mild-slope equation model in this field would help for understanding of wave transformation mechanism where many other models could not deal with up to now. The purpose of this study is to form a extended mild-slope equation wave model and make comparison and analysis on variation of harbor responses in the vicinities of Ulsan Harbor and Ulsan New Port, etc. due to construction of New Port in Ulsan Bay. We also considered the increase of water depth at the entrance channel by dredging work up to 15 meters depth in order to see the dredging effect. Among several model analyses, the nonlinear and breaking wave conditions are showed the most applicable results. This type of trial might be a milestone for port development in macro scale, where the induced impact analysis in the existing port due to the development could be easily neglected.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.08a
• /
• pp.217-225
• /
• 2004

Introduction of wave model, considered the effect of shoaling, refraction, diffraction, partial reflection, bottom friction, breaking at the coastal waters of complex bathymetry, is a very important factor for most coastal engineering design and disaster prevention problems. As waves move from deeper waters to shallow coastal waters, the fundamental wave parameters will change and the wave energy is redistributed along wave crests due to the depth variation, the presence of islands, coastal protection structures, irregularities of the enclosing shore boundaries, and other geological features. Moreover, waves undergo severe change inside the surf zone where wave breaking occurs and in the regions where reflected waves from coastline and structural boundaries interact with the incident waves. Therefore, the application of mild-slope equation model in this field would help for understanding of wave transformation mechanism where many other models could not deal with up to now. The purpose of this study is to form a extended mild-slope equation wave model and make comparison and analysis on variation of harbor responses in the vicinities of Ulsan Harbor and Ulsan New Port, etc. due to construction of New Port in Ulsan Bay. This type of trial might be a milestone for port development in macro scale, where the induced impact analysis in the existing port due to the development could be easily neglected.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.12
• /
• pp.85-96
• /
• 2011

A breakwater is a important structure for both calmness of harbor and protection of the port facilities from waves generated from typhoons or wind. This study adopted the rubble mound breakwater, which is one of the most popular type of breakwaters in Korea. Rubble mound breakwater had been designed by considering only static condition previously. Recently, a dynamic wave-load due to waves has been also considered in designing breakwater. In design, the wave-load is assumed as an uniform load which only acts in the front slope of the breakwater. However, the assumption is not applicable in reality. In this study, therefore, a real-time wave-load acting on the breakwater instead of the uniform load is considered, and it is assumed to be acting on the seabed too. Based on the numerical analysis, it is found that there is a significant difference in the maximum settlement compared with the result predicted by the existing design method.

• Journal of Fisheries and Marine Sciences Education
• /
• v.17 no.2
• /
• pp.193-208
• /
• 2005

The object of this study is to provide a framework of increasing the effectiveness of the R&D planning of experts in fisheries and the education of students with the theoretical background and analytical skills through the adoption of technology roadmapping process in the marine production industry. The study was conducted by fact-finding surveys and the response content for surveys obtained from each expert advisor in the field of fisheries and maritime affairs such as fishery industries, some government organizations and research institutes including the Ministry of Maritime Affairs and Fisheries (MOMAF), National Fisheries Research and Development Institute (NFRDI) and fisheries-related universities was analyzed. The major implementation tasks to effectively achieve the basic goals of technology roadmap for short and middle-term research and development in the fisheries production field are as follows: 1. Research in order to achieve the realization of community-based resource management fisheries or fishermen-oriented co-management fisheries with paradigm shift in fisheries management. 2. Research in order to derive the construction of cost reducing and manpower saving systems in fishery-related science, technology and engineering. 3. Research in order to create the high value-added fisheries products with a focus on the upgrading of processing, freezing and refrigerating facilities, the reduction of logistics costs and the minimization of distribution steps. 4. Research in order to achieve the realization and development of environmental-friendly fisheries and internationally competitive fisheries through restructuring the entire fishing industries, in particular, small-scale fisheries. 5. Research in order to achieve the effective utilization of fisheries resources with a new creation of clean and living marine environment by fisherman under the balanced management and protection of marine living resources and fishing grounds.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.5
• /
• pp.38-45
• /
• 2001

Environmental protection on the ocean has been interested and nowadays the International maritime organization(IMO) has advanced on the prevention of air pollution from ships. This study presents the emission characteristics of 4 stroke propulsion diesel engine in E2 cycle (constant speed) and E3 cycle (propeller curved speed). Also the effects of important operating parameters in terms of intake air pressure and temperature, and maximum combustion pressure are described on the specific emissions. Emissions measurement and calculation are processed according to IMO technical code. The results show that NOx emission level in E3 cycle is higher than E2 cycle due to lower engine speed and lower maximum combustion pressure by retarding fuel injection timing. Intake air temperature has strong influence on NOx emission production. And CO, HC emissions are not affected by maximum combustion pressure and intake air pressure and temperature.

• Journal of Power System Engineering
• /
• v.21 no.6
• /
• pp.110-116
• /
• 2017

Recently the global warming caused by greenhouse gas has emerged as a global environmental problem. For this reason the continued efforts to reduce greenhouse gas emission by international cooperation and each country are in progress. Climate changing has been recognized as the world economy development from fossil fuel use is the culprit. The international maritime organization marine environment protection committee of the global warming reduction emerged restrictions on air pollution have been strengthened. Therefore, the author has investigated the effects of fuel temperature on the characteristics of combustion and performance, using an four-cycle, six cylinders and direct injection diesel engine. The results of cylinder pressure, rate of pressure rise, rate of heat release and specific fuel consumption were increased by changing of fuel temperature.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2006.11a
• /
• pp.177-178
• /
• 2006

This plan is for a different type of welfare facilities devised by analyzing problems with existing welfare centers and focusing on connection with residents and link between culture and welfare and among generations. In terms of re-development plan of Youngsun-2-dong, Youngdo-gu, Busan and the neighborhood under this plan, Youngsun-dong, Youngdo-gu is one of the densely populated districts of the aged, with lower growth rate and poor housing and welfare facilities. However, the district has a blessed natural environment and historical site of cultural relics of the Neolithic Age as well as growth potential as a logistics center with broader network of roads linking with Bukhang Bridge when Namhang Bridge construction is complete, showing the aspiration for change toward hi-tech maritime city in the 21st century of Youngdo-gu. This plan is expected to promote unity between the old and children, protection from social marginalization, and re-socialization education and set the stage for participation and solidarity of residents in the community.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.3
• /
• pp.457-465
• /
• 2004

Environmental protection on the ocean has been interested and nowadays the International Maritime Organization(IMO) has advanced on the prevention of air pollution from ships. This study presents the performance and the emission characteristics of 4 stroke marine diesel engines for generation application in D2 cycle(IMO mode). The effects of important operating parameters, such as intake air pressure. intake air temperature and maximum combustion pressure on NOx emissions were also described. Emissions measurement and calculation are processed according to IMO Technical Code. The results show that the maximum combustion pressure by fuel injection timing control and intake air temperature has strong influence on NOx emission production. But NOx emission is not affected by intake air pressure and exhaust gas back pressure.

• Journal of Navigation and Port Research
• /
• v.38 no.4
• /
• pp.357-366
• /
• 2014

On December of 2003, IMO's $23^{rd}$ Assembly discussed 'Guidelines on places of refuge for ships in need of assistance' At the discussion, Res. A.949(23) has been selected to appoint recommended place of refuge for countries signatory to the IMO Convention. IMO defines "Places of Refuge" as a places where a ship in need of assistance can take action to enable it to stabilize its condition and reduce the hazards to navigation, and to protect human life and the environment. Appointing and managing a Place of refuge can be a delicate problem because of its close connection to each country's coastal and environmental protection policies. However, in case of marine accident, the appointment or management of the place of refuge has a potential to avoid further damage and reduce to the minimum any environmental and estate losses. Currently a number of foreign countries, designated and operated a place of refuge. But, place of refuge selected method criteria were different by country and also does not have any standardized designating place of refuge model. Therefor, this study suggested the model of assigned places of refuge according to objective indication in order to assign reasonable and efficient places of refuge in domestic waters in the future by investigating and analyzing imported facts in considering the assignment of places of refuge in foreign countries and describing these imported data into quantitative value. In designating the model place of refuge, the final place of refuge location was presented by evaluating the probability of marine accidents, analyzing the location, and evaluating the supporting establishment.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.28 no.6
• /
• pp.361-374
• /
• 2016

When the seabed around and under gravity structures such as submerged breakwater is exposed to a large wave action long period, the excess pore pressure is generated significantly due to pore volume change associated with rearrangement soil grains. This effect leads a seabed liquefaction around and under structures as a result from decrease in the effective stress, and the possibility of structure failure is increased eventually. These facts shown above have been investigated in the previous studies related to regular and irregular waves. This study suggested a concrete mat for preventing the seabed liquefaction near the submerged breakwater. The concrete mat was mainly used as a countermeasure for scouring protection in riverbed. According to installation of the concrete mattress, the time and spatial series of the deformation of submerged breakwater, the pore water pressure, and the pore water pressure ratio in the seabed were investigated. Their results were also compared with those of the seabed unprotected with the concrete mat. The results presented were confirmed that the liquefaction potential of seabed under the concrete mattress is significantly reduced under regular wave field.