Abstract
A breakwater is a important structure for both calmness of harbor and protection of the port facilities from waves generated from typhoons or wind. This study adopted the rubble mound breakwater, which is one of the most popular type of breakwaters in Korea. Rubble mound breakwater had been designed by considering only static condition previously. Recently, a dynamic wave-load due to waves has been also considered in designing breakwater. In design, the wave-load is assumed as an uniform load which only acts in the front slope of the breakwater. However, the assumption is not applicable in reality. In this study, therefore, a real-time wave-load acting on the breakwater instead of the uniform load is considered, and it is assumed to be acting on the seabed too. Based on the numerical analysis, it is found that there is a significant difference in the maximum settlement compared with the result predicted by the existing design method.
방파제는 태풍 또는 바람 등으로 발생된 파랑으로부터 해안, 항만시설을 보호하고 항내 수역의 정온도 확보를 위한 중요한 구조물이다. 국내에 가장 일반적인 방파제중 하나인 경사식 방파제를 본 연구과제로 선정하였다. 경사식 방파제는 정적조건만을 고려하여 설계되었다. 최근에 파랑작용에 따른 동적파압도 설계에서 고려하고 있다. 하지만 동적파압을 경사식 방파제의 경사면에만 국한하여 적용시키고, 적용된 파압 역시 등가파압으로 가정하였다. 이것은 방파제에 실제로 작용하는 파압분포와 다르다. 따라서 본 연구에서는 방파제경사면에 작용하는 파압을 등가파압이 아닌 실제 작용하는 시간이력파압을 적용하고 파압을 경사방파제의 경사면뿐만 아니라 해저지반에 추가적으로 고려하였다. 이를 반영한 수치해석을 통해 산출된 최대침하량이 현재의 설계법에 의해 산출된 최대침하량과 비교 시 상당한 차이가 있는 것으로 나타났다.