References
- K. S. Jung, 2014, "Improvement of combustion efficiency for marine auxiliary diesel engine", KSME, Vol. 38, No. 3, pp. 233-239.
- J. K. Lim, S. G. Cho, H. H. Lee and H. S. In, 2013, "Effects of Fuel Injection Timing on performance in Old Marine Diesel Engine", KOSME, Vol. 19, No. 5, pp. 525-530.
- V. Pradeep, and R. P, Shama, 2007, "Use of HOT EGR for NOx control in a compression ignition engine fuelled with bio-diesel from Jatropha oil", Renewable Energy, Vol. 32, pp. 1136-1154. https://doi.org/10.1016/j.renene.2006.04.017
- Y. H. Park, S. Y. Chung, Y. H. Son and W. K. Lee, 2010, "Investigation on Enhancing Efficiency in International Cooperation for climate Change Adaptation of Republic of Korea", Climate Change Research, Vol. 1, No. 2, pp. 179-188.
- d. Y. Kim, I. E. Cho, S. W. Lee and S. I. Oh, 2007, "A study on spray and combustion characteristics affected by temperatures of Bio-Diesel fuel", KSAE07-S0082, pp. 533-538.
- J. K. Lim and S. G. Cho, 2012, "Effects of Fuel Injection Timing on Exhaust Emissions Characteristics of Biodiesel Blend Oil in Diesel Engine", KOSME, Vol. 36, No. 5, pp. 603-608.
- D. S. Baik and S. W. Lee, 2008, "A Study on Spray and Combustion Characteristics by Temperature of Biodiesel Fuel", Transactions of KSAE, Vol. 16, No. 1, pp. 152-157.
- J. K. Kim, G. Ainll, K. K. Song, J. Y. Jung and H. G. Kim, 2011, "An Experimental Study on Spray Characteristics of Diesel and Bio-diesel Fuel", KSME, Vol. 35, No. 1, pp. 53-59.
- M. L. Lee, H. U. Kim, J. S. Lee, K. G. Cha, K. N. Choi and D. S. Jeong, 2003, "A Study on the Design of a Mixer at Industrial engine according to the Fuel change", KSAE03-S0024, pp. 143-150.
Cited by
- 작동 연료온도가 Bypass type 피에조 인젝터의 분사 특성에 미치는 영향 vol.24, pp.2, 2019, https://doi.org/10.15435/jilasskr.2019.24.2.66