• Journal of Advanced Navigation Technology
• /
• v.21 no.5
• /
• pp.423-427
• /
• 2017

The IMO approved e-navigation strategy implementation plan made e-navigation adoption visible. In addition, the schedule for the modernization of GMDSS by the ITU was confirmed at the 4th NCSR meeting. Accordingly, we will complement the existing communication system and provide the requirements for the new communication system to be introduced in the future, reflecting all the requirements for the communication system capable of supporting the e-navigation service. Although the communication method for supporting e-navigation service should be capable of providing IP-based data communication basically, it is impossible to provide internet service because of the narrow-band characteristic in the MF/HF frequency bands. In addition, as the existing GMDSS satellite communication service organization expands and new services are introduced, IP based data communication service will be possible, but service restriction resulting from expensive communication cost can be solved by introducing VSAT service.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.122-125
• /
• 2005

Data collection system is now widely used. This system is divided by embedded system and communication module. And data collection system in the remote area is using Satellite communication. So, data collection system is complicated and expensive. This paper proposes stabilization and cheapness of remote data collection system in dusty. The system can be composed simply through third party Satellite Communication programming of terminal including embedded system. Finally, collected data is transmitted to multi-user through web agent.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.1003-1007
• /
• 2008

Even if the HF band SSB maritime data communications service company has operating a target Of the member ship, because of unprepared. the radio link protocol that has been question accordance with increase of calling redundancy at traffic overload. Although free signal has operating for traffic of the next ship, but cannot avoid the collision in mutual calling ships. In feature of HF band SSB channel that radio link must be established by automatical, stability and adaptive at over load. In this factor, this paper is studied the new radio protocol by 3 step sequency driving of free access, group free access and polling access.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.1277-1280
• /
• 2009

본 논문은 ITU-T 권고안 J-38 부록 B에 명시된 전송방식의 분석 및 시뮬레이션을 토대로 성능을 분석 하였으며 FPGA 구현시 야기되는 문제점을 나타내고, 해결방안을 제시하였다. 구현상의 문제점으로는 크게 두 가지로 분류되는데, 첫째로 다양한 부호화 방식과 변조방식 그리고 심볼 단위 및 비트 단위의 처리로 인해 많은 클럭수를 요구하는데 본 논문에서는 읽기/쓰기 메모리를 이용하여 필요한 클럭수를 줄였다. 둘째로는 펑쳐링 부호화된 TCM 복호기에 펑처링 패턴에 정확한 동기를 얻지 못하면 프레임 동기 심볼인 UW(Unique sync-Word)를 획득하지 못하여 모든 데이터가 에러 처리되기 때문에 본 논문에서는 펑처링 패턴과 UW 심볼의 동기를 맞추는 알고리즘을 제시하였다. 이러한 알고리즘 분석 및 구현상의 문제점 해결을 토대로 본 논문에서는 ITU-T J38 annex B의 하향 스트림 채널 부호화 시스템을 VHDL 언어를 사용하여 FPGA 칩에 직접 구현하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.1296-1299
• /
• 2009

본 논문은 이동체에 대한 위성방송 및 인터넷 서비스를 지속적으로 제공하기 위해 기존의 DVB-S2 표준화에 DVB-H 와 DVB-T 를 결합한 새로운 DVB-SSP 표준화에 대한 연구를 하고 있다. 이동형 DVB-S2의 표준화는 DVB-SSP 라 불리며 최근에는 DVB-SH로 불리고 있다. 이는 이동체에 대해서 위성을 이용한 통신 방식을 규정하고 있으며, physical layer 와 upper layer 의 두 단계로 부호화 및 복호화하는 방식인 cross layer 부호화 방식을 적용하고 있다. 기존의 방식 경우, LDPC 복호후 CRC 검사를 수행하여 수신된 데이터에서 1 bit 의 오류에도 IP 패킷 모두를 삭제함으로써 복호시 비효율성을 나타낼 수 있다. 따라서 본 논문에서는 LDPC 복호기에 출력되는 LLR 값을 이용하여 IP 패킷 전체를 삭제하는 것이 아니라 LLR 값이 낮은 비트만 선택적으로 삭제하는 방식을 제안하며, 이를 시뮬레이션하여 기존의 CRC 방식과 비교하였다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.1
• /
• pp.115-122
• /
• 1987

In this paper, we proposed an improved weakly-coupled power divider(TAP UNIT) for CATV and/or MATV systems, by which the degree of freedom in design and density of coupling interval are signifcantly increased compared with the intrinsic one even though the turn ratios are still of discrete values. On the other hand, the new design theory of a generalized n-way power divider with arbitrary dividing ratios, for CATV and/or MATV systems, which consists of ideal multiwinding transformers and resistors only was presented. Since the circuit elements is not frequency dependent, the proposed power divider is to be of considerably broad bandwidth. Furthermore, the experimental verification has been achieved, and, hence, the validity of the design theory proposed here is confirmed.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.05a
• /
• pp.155-155
• /
• 2018

In this study, we measured the communication performance of inductive coupler under high current condition. Ferrite and nanocrystalline cores were used to compare the available PLC communication range and bandwidth for current fluctuations.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.8
• /
• pp.2736-2750
• /
• 2022

As demands for the maritime communications increase, a variety of functions and information are required to exchange via elements of maritime systems, which leads communication traffic increases in maritime frequency bands, especially in VHF (Very High Frequency) band. Thus, effective resource management is crucial to the future maritime communication systems not only to the typical terrestrial communication systems. VHF data exchange system (VDES) enables to utilize more flexible configuration according to the communication condition. This paper focuses on the VDES communication system among VDES terminals such as shore stations, ship stations and aids to navigation (AtoN) to address efficient resource allocation. We propose a resource management method considering a MIMO (Multiple Input Multiple Output) technique in VDES, which has been widely used for modern terrestrial wireless networks but not for marine environments by scheduling the essential communication resources. We introduce the general channel model in marine environment and give two metrics, spectral and the energy efficiencies to examine our resource scheduling algorithm. Based on the simulation results and analysis, the proposed method provides a possibility to enhance spectral and energy efficiencies. Additionally, we present a trade-off relationship between spectral and energy efficiencies. Furthermore, we examine the resource efficiencies related to the imperfect channel estimation.

• Journal of electromagnetic engineering and science
• /
• v.12 no.1
• /
• pp.20-25
• /
• 2012

In this paper, the EM wave absorber for ETC system was designed and fabricated. We fabricated several samples in different composition ratios of flaked sendust and CPE(Chlorinated Polyethylene). Absorption abilities were simulated in accordance with different thicknesses of the prepared absorbers and changed complex relative permittivity and permeability according to composition ratio. The optimized mixing ratio of flaked sendust and CPE was found as 60 : 40 wt.% by experiments and simulation. Then the EM wave absorber was fabricated and tested using the simulated data. As a result, the developed EM wave absorber has the thickness of 2.75 mm and absorption ability was 22.5 dB in the case of normal incidence at 5.8 GHz. Therefore, it was confirmed that the newly developed absorber can be used for ETC system.

• Journal of information and communication convergence engineering
• /
• v.9 no.5
• /
• pp.523-529
• /
• 2011

In this paper an inter-layer protocol, referred to as a Multi-Network Selector (MNS) is proposed for multiband maritime networks. A MNS is located between the data-link layer and the network layer and performs vertical handover when a ship moves another radio network. In order to provide seamless data transfer to different radio networks, the MNS uses received signal strength (RSS) and ship's location information as decision parameters for vertical handover, which can avoid ping-pong effect and reduces handover latency. In addition, we present related issues in order to implement the MNS for a multiband maritime network.