• 제목/요약/키워드: marine space

검색결과 564건 처리시간 0.031초

다양한 형상을 갖는 액화가스 기화기의 기화특성에 관한 실험적 연구 (Experimental Study on the Gasification Characteristics of Liquefied Gas Vaporizer with Various Shape)

  • 이용훈;이상철;정효민;정한식
    • 한국지열·수열에너지학회논문집
    • /
    • 제2권1호
    • /
    • pp.1-7
    • /
    • 2006
  • This paper was studied for optimum design of the used vaporizer at a satellite station. Generally, the cold air is created by temperature drop on the vaporizer surface. In addition, the frost creates ice deposit layer, therefore, heat transfer on vaporizer decreases into the adiabatic condition. By this reason, recent vaporizer system is installed as parallel type, and it takes three times of vaporizer capacity. But this vaporizer system requires much installation costs and restricted by some space. It is very important to solve this problem. This study paper is regarding $LN_2$ vaporizer where the utilization increases recently. There are three variable conditions which are used in this study research. First, fin lengths of 4000mm, 6000mm, 8000mm and 0, 4, 8 fin types were applied rut each vaporizer. Second, we applied four season condition which consist of humidity, temperature and air velocity to the experimental environment. Finally, pressure was applied to get flow rate during experiment. This paper objective is to propose vaporizer type and length data for best performance of vaporizer through experiment.

  • PDF

Walsh code를 이용한 Manchester code 기반 가시광 통신 실내 위치인식에 대한 연구 (A study on indoor visible light communication localization based on manchester code using walsh code)

  • 김원열;박상국;조웅호;노덕수;서동환
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제39권9호
    • /
    • pp.959-966
    • /
    • 2015
  • 본 논문에서는 Walsh code를 이용하여 중첩된 Light emitting diode(LED) 송신신호들을 수신부에서 각각의 LED 송신신호로 식별하고 조명의 깜박임 현상을 제거할 수 있는 Manchester code 기반 가시광 통신 실내 위치인식 시스템을 제안한다. 제안한 시스템은 고정된 LED 광원의 위치정보들과 수신부에서 그들로부터 수신된 신호들을 람버시안 방사 특성과 삼변 측량법을 이용하여 수신부의 상대적인 위치를 추정할 수 있다. 제안한 논문의 타당성을 검증하기 위하여 16개의 LED 조명을 설치한 $6{\times}6{\times}1.5m^3$의 실내 공간에서 모의실험을 수행하였다. 그 결과, 중첩된 송신신호들은 수신부에서 분리가 가능하고 측위 오차는 최대 0.2977 m, 평균 오차 0.0536 m로 정밀한 위치 인식이 가능하였다.

Triton WR-1339 복강주사로 유도된 생쥐의 고지혈증에 대한 참홑파래 추출물의 영향 (Effect of the Seaweed (Monostroma nitidum) Extract on Triton WR-1339 Induced Hyperlipidemia in Mouse)

  • 정영하;조용철;박인식;안상현;김진택;강용주;홍용기
    • 한국수산과학회지
    • /
    • 제30권5호
    • /
    • pp.850-858
    • /
    • 1997
  • An antihyperlipidemic effect was observed by intraperitoneal injection of the seaweed Monostroma nitidum extract. Hyperlipidemia was induced by intraperitoneal injection of Triton WR-1339 $(60\;{\mu}g/g-body\;weight)$ into a mouse. Maximum level of blood cholesterol was reached at 20 hours after Triton injection. By simultaneous injection of the M. nitidum extract $(30\;{\mu}g/g-body\;weight)$ with the Triton into each right and left sides of the peritoneal cavity, levels of total cholesterol and low density lipoprotein were decreased to $24\%\;and\;14\%$ compared to Triton injection only. For histochemical changes, hepatic tissues obtained at 40 hours after injection of the Triton and the M. nitidum extract were fixed in fromol-calcium solution. The meshlike cytoplasms disappeared and hapatic plates were recovered in mice injected with the M. nitidum extract. Numbers of lipid drops and cholesterol particles also decreased in the portal space of the hepatic cytoplasm. This indicates that the accumulation of lipid, including cholesterol, caused by Triton was prevented by the antihyperlipidemic effect of extract from the seaweed M. nitidum.

  • PDF

해상 풍력 타워에 관한 자동요소 생성법 (Automatic Mesh Generation Method on The Offshore Wind Tower)

  • 김남형;강현진
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제16권2호
    • /
    • pp.130-137
    • /
    • 2013
  • 더욱 정확한 수치 해석이 필요하면 할수록, 해석하고자 하는 구조물 상의 절점과 요소를 적절하게 배치하는 것이 중요하게 된다. 본 연구에서는 천해영역에서 구조적인 이점과 경제성의 두 가지 장점을 가지고 있는 원형 단면의 하부 구조물에 대한 3차원 삼각 Shell 요소 생성기법을 개발하였다. 높이와 형태와 같은 상세한 데이터를 입력하여 제어하는 것에 의해 기초와 타워를 다양한 유한요소 조건에서 고려할 수 있도록 하였다. 또한 기존의 3차원 Delaunay 삼각요소분할법을 사용한 결과의 수치와 비교, 검증하였으며, 현재 제안되어진 기초와 하부구조물에 적용한 요소 분할의 예를 들었다. 본 연구의 결과는 현존하거나 제안되어진 풍력 터빈의 기초부와 타워의 제원에 대해 다양하게 적용될 수 있을 것이라 사료된다.

레포츠피싱을 통한 어가소득 증대에 관한 연구 (Feasibility of Enhancing Fishing Household Income Through Leports-fishing Development)

  • 박성쾌;김수진;김영자
    • 수산해양교육연구
    • /
    • 제19권2호
    • /
    • pp.180-196
    • /
    • 2007
  • This study aims at analyzing the potential of leports-fishing for improving fishing household income. Leports-fishing is a composite concept which is combined with those of leisure, sports and fishing. Korean on-shore resources have also a composite characteristic. The properties of the east, west and south coastal waters are quite different in geography, biology and ecology. There is a array of leports-fishing development potentials of utilizing their characteristics. At present, angling forms a main activity of leports-fishing, but coastal seas would be an emerging space for the public. In order for them to be a ground of fun, enjoyment and festivals, it would be necessary to supply a wide range of activities and facilities including angling, scuba diving, fish barbecue, ecological experience, fishing experience, cruise, and so forth. As seen in the survey results, the participants have strong desire for fun and enjoyment through leports-fishing activities. The proportion of people participating in one or two times a year amounts to 40 percent. Most coastal places visited are close to medium/large cities and two-days leports-fishing/tourism accounts for some 77 percent. However, it turned out that conflicts between leports-fishing participants and fishermen are not serious. The results of expenditure function estimation appear that the elasticity of per capita income is very high with 1.2660 and that there are negative relationships between leports-fishing expenditure and transportation/food/lodging costs. Assuming the annual national economic growth rate of 4 percent, it is anticipated that Korean leports-fishing population will increase to 3.18 million in 2010 and 4.07 million in 2015. Korean leports-fishing market potential in 2015, which is calculated based on per capita expenditure on leports-fishing, appears to amount to 1,400 billion won~1,600 billion won. The contribution of such market potential to the fishing households is expected to be 62.3~74.2 percent(934.5 billion won~111.3 billion won).

인광성 백색 LED의 가시광 통신 변조 대역폭 향상을 위한 등화기 구현 (Implementation of the Equalization Circuits for High Bandwidth Visible Light Communications Using Phosphorescent White LED)

  • 손경락
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제39권4호
    • /
    • pp.473-477
    • /
    • 2015
  • 본 논문에서는 인광물질을 포함하는 조명용 백색 LED를 이용한 가시광 통신 시스템의 변조 대역폭을 늘리기 위한 등화기를 설계하고 실험적으로 결과를 보였다. 등화기의 성능을 분석하기 위한 해석적 방법으로 회로 시뮬레이터인 PSpice를 이용하였다. 등화기는 저항과 커패시터를 이용한 수동필터와 증폭기를 이용한 능동필터의 조합으로 구성하였다. 등화기를 수신단에 적용함으로써 3.5 MHz 부근의 인광성 백색 LED 변조 대역폭이 청색 광학필터를 사용하지 않고도 25 MHz 까지 확장되었다. 상용화된 라운드형 백색 LED 1개와 PIN형 광 다이오드 1개를 이용하여 구현한 가시광 통신 시스템에서 진폭편이변조 방식으로 변조된 LED의 가시광 신호는 1미터 거리에서 35 Mbit/s 데이터 전송률을 보였다. 이때의 비트 에러율은 $7.6{\times}10^{-4}$이었으며 이는 순방향 오류 정정의 한계인 $3.8{\times}10^{-3}$ 이하를 만족하였다.

근접노드와 거리변화량분석기법을 이용한 선내 위치인식 개선 알고리즘 (An improvement algorithm for localization using adjacent node and distance variation analysis techniques in a ship)

  • 성주현;임태우;김종수;박상국;서동환
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제37권2호
    • /
    • pp.213-219
    • /
    • 2013
  • 최근 정보 통신 기술의 발전에 따라 GPS를 이용한 실외 위치 기반 서비스와 더불어 정밀한 위치추적이 필요한 실내 위치 기반 서비스에 대한 연구가 활발히 진행되고 있다. 하지만 철골 구조로 이루어진 선박은 전파의 회절 및 굴절에 의한 레인징 오차로 인하여 정확한 위치 측정이 어렵다. 이러한 실내 환경에서 발생하는 위치측정 오차를 줄이기 위하여 본 논문에서는 다중경로에 강인하고 자유공간에서 수 센티미터의 오차를 가지는 UWB(Ultra-wide-band)를 이용하여 어떠한 부가적인 센서 없이도 선내 복도와 같은 좁은 통로에 적합한 거리 개선 알고리즘을 제안한다. 이 개선 방법은 고정노드 배치로 인한 거리 오차는 피타고라스 이론과 근접노드기법으로 해결하고 복도의 코너 구역에서 크게 발생하는 레인징 오차는 거리변화량분석기법을 적용하여 보정하였다. 실험결과 제안한 방법이 기존의 CSS(Chirp spread spectrum) 방법과 비교할 때 노드 수와 거리오차를 각각 66%와 57.41%로 줄였다.

선박 평형수 처리장치 선정을 위한 경제성 분석 (Economy Analysis to Retrofit Ballast Water Treatment System for an Existing Vessel)

  • 지재훈;박상균;오철
    • 수산해양교육연구
    • /
    • 제28권5호
    • /
    • pp.1319-1328
    • /
    • 2016
  • Since Ballast Water Management Convention has been effected, BWTS, applied to new-building vessels and existing vessels, have been developed from many countries with various treatment methods. However, BWTS is mainly typed Electrolysis, Ozone and UV type. Approximately 70 products have been type approved by the Flag Administrations. For the new-building vessels, the vessels' design and construction have been considered for arrangements and installations for BWTS. However, existing vessels which already construction had finished have problem with selection of BWTS type for installation and arrangement. The selection of the most economized BWTS system is important though, CAPEX has not been made any significant differences. However, OPEX is more important factor. Consequently, detail analysis of OPEX is the key to the selection of the most economized BWTS system and also it can be the purpose of this study. The feasibility study on the main three type of BWTS (Electrolysis, Ozone and UV type) for 175K Bulk Carrier and 57K Cargo ship has been conducted for this study. Because, these three type of BWTS have been the most frequently installed and used and the two type of object vessels are consist of the 40% of the world merchant ship market. For this study, interest rate, project duration (operation time after installation), maintenance cost and fuel oil price are considered as major factor of feasibility study. In addition, expecting Interest rates to sensitivity analysis conducted for more accurate feasibility study. For 175K Bulk carrier, ozone treatment system is more economical than other types. For 57K cargo ship, UV type is considered more economical than other types. However, it is concluded that electrolysis type is more suitable compare to installation space, total weight and electrical power consumption.

아태지역 항만국통제 점검결과에 관한 연구 - Tokyo MOU 출항정지를 중심으로 - (A Study on the Port State Control Inspection Results of Tokyo MOU - Focused on Detentions of Tokyo MOU -)

  • 임명환;신호식
    • 수산해양교육연구
    • /
    • 제29권2호
    • /
    • pp.333-342
    • /
    • 2017
  • In this study, we studied and analyzed 3,751 ships regarding detention list of Tokyo MOU from 2013 to 2015 total for 36 months. The Member Authorities of the MOU has 20 committee consists of Korea and Peru joined in 2015. 1,250 ships in a year and 140 ships in a month are granted PSC Action Code-30 corresponding to detention. Averagely, 30,943 ships in a year and 2,579 ships have been received PSC inspection. Additionally, according to this PSC inspection, rate of Detention reaches to 4.04%. When it comes to Korean Flag Ships however, the number of Detention ships of Tokyo MOU has been rather increased from 3 ships in 2013 to 18 ships during 2years. Furthermore, MOU in the all over the world, the number of ships had Detention has largely increased from 5 ships to 9 up-to 19ships. The number of Detention Ships has been reached to 44.8% of 1~2 days period of Detentions, under 3~10 days period of Detentions reaches to 34.7% and over 10 days detention reaches 10.3%, which cause economically enormous loss. Continually, each MOU has been implemented Concentrated Inspection Campaign(CIC) annually. Each MOU including Tokyo MOU implemented "Crew Familiarization for Enclosed Space Entry" for 3 month from september, and During this period, Concentrated Inspection were carried out to 8,429 ships of Tokyo MOU. Accordingly, If ships and owners can get the information of CIC and deliver the information to the ship, then Ships can minimize the rate of Detention by thoroughly preparing for PSC Inspection. In addition, Bulk Carrier and General Cargo ship occupy 50% of rate of Detention and it shows that majority of list among Nature of Deficiencies are identical. Finally, If we can obtain the information of the ships inspected previously, We can reduce the number of detention by preparing for PSC inspection. And this will be able to contribute to shipping industry also.

"Inclined Keel" 컨테이너선의 조파저항 최소화를 위한 선형최적화 (Minimization of Wave-making Resistance for "Inclined Keel" Containership)

  • 서광철;;김희정;전호환
    • 대한조선학회논문집
    • /
    • 제46권2호
    • /
    • pp.97-104
    • /
    • 2009
  • Ever increasing fuel prices, almost doubled in the last three years, and global pressure to reduce their environmental impact have been enforcing commercial vessel operators and designers to re-assess current vessel designs with emphasis on their propulsion systems and operational practices. In this paper the "Inclined Keel Hull (IKH)" concept, which facilitates to use larger propeller diameter in combination with lower shaft speed rates and hence better transport efficiency, is explored for a modern 3600 TEU container vessel with the aim of fitting an 13 % larger diameter propeller (and hence resulting 20% lower rpm) to gain further power saving over the similar size basis container ship with conventional "level keel" configuration. It appears that successful application of the "inclined keel Hull" concept is a fine balance amongst the maximum gain in propulsive efficiency, minimum increase in hull resistance and satisfaction of other naval architectural and operational requirements. In order to make the concept economically more viable, this paper concentrates on the fore body design with the possible combination of increase of volume in its fore body to recover the expected volume loss in the aft body due to the space for larger propeller and its low wave-making resistance to minimize the efficiency loss using a well-established optimization software.