• Proceedings of KOSOMES biannual meeting
• /
• 2008.05a
• /
• pp.147-151
• /
• 2008

In Southern Sea of Korea, there are upwelling area where artificial seamount were built and the environment variations (temperature, salinity, nutrient and current) of before and after built seamount were observed between 2002 and 2007. In 2002, before the seamount was built, there had stratification at 20-30m. And in 2007, seamount was built, stratification of the seamount at the front and back of it were changed by 10-40 m and 20-30 m, respectively. To know the reason of this results, we used temperature and salinity using Brunt-Vaisala Frequency and horizontal current using vertical shear and relative vorticity. They showed upwelling was mainly reason that changed the ocean environment.

• Proceedings of KOSOMES biannual meeting
• /
• 2008.05a
• /
• pp.169-171
• /
• 2008

The objective of this paper is to explore the short-term variability of sea surface temperature (SST) and chlorophyll a (Chl-a) derived from satellite in the upwelling region of the southeast coast of Korea in summer. We particularly emphasize the spatial variability of SST and Chl-a in the East Korean Warm Current (EKWC) during summer monsoon. Spatial distribution of SST and Chl-a in the EKWC are described using SeaWiFS and AVHRR images in August, 2007. Spatial distribution of SST and Chl-a around EKWC can be classified into four categories in the profile of SST and Chl-a images: (1) coastal cold water region, (2) cold water region of thermal front, (3) warm water region, (4) cold water of offshore region.

• Journal of the Society of Naval Architects of Korea
• /
• v.58 no.2
• /
• pp.84-89
• /
• 2021

Recently, shipyards are making many efforts to reduce the number of the mounted blocks by increasing the block size. This is to improve productivity and reduce related costs by minimizing block movement and shortening the building period. However, as the blocks become larger, the weight increases considerably. If the target block has a damage due to an unexpected accident during block lifting, it may seriously cause a problem of the reusability of the block. In this study, a large-sized block of the offshore structure weighing 480 tons was lifting with a total of seven sling belts, and one sling belt was broken while it was moving, resulting in a situation in which a part of the edge of the block collided with the ground. The aim of this paper is to verify the structural integrity of the block that directly collides with the ground in the form of free fall due to the sling breakage. Considering that the hook loads acting on several sling belts holding the block are redistributed when a sling belt is broken, the hook loads were recalculated at the angle just before the sling breakage. These loads were used to check the safety of the sling belts. In addition, FE analysis was performed by calculating the amount of impact from the free fall condition, obtaining the impact area by using Hertz's contact theory, and then applying the impact load to the area.

• Journal of fish pathology
• /
• v.34 no.2
• /
• pp.261-269
• /
• 2021

This study presents the evaluation of sample extraction and purification procedure for the determination of residues of febantel and its metabolites, fenbendazole, oxfendazole and oxfendazole sulfone in rockfish (Sebastes schlegeli) muscle using liquid chromatography-tandem mass spectrometry. Residues of febantel and its metabolites in rockfish muscle were analyzed using each different sample preparation method from Korean Food Standards Codex (KFSC), Food Safety and Inspection Service (FSIS, USA), and the modified FSIS method using QuEChERS kit (FSIS-Q), respectively. Each method was compared for mean recoveries and repeatabilities. Since FSIS-Q showed higher repeatabilities (coefficient of variation, CV of 2.4%~10.9%) than those of FSIS method (CV of 4.6%~17.5%), recoveries from FSIS-Q were compared with those from KFSC method. FSIS-Q showed significantly higher recoveries of 83.1%~110.1% (P < 0.05) than those from KFSC method of 64.7%~107.4%. In addition, FSIS-Q showed a good linearity over the range of 2.5~200 ㎍/kg, and excellent sensitivities with limit of detection of 0.46~0.71 ㎍/kg and limit of quantification of 1.08~2.15 ㎍/kg. Although all the sample preparation methods turned out to be able to meet CODEX guideline for all the compounds, FSIS method and FSIS-Q validated in this study could be applied to screening and quantification for residues of febantel and its metabolites in rockfish muscle with efficient preparation procedures.

• Fire Science and Engineering
• /
• v.32 no.6
• /
• pp.126-133
• /
• 2018

Korea has been preparing and operating crisis management standardized manuals so that over 30 disaster types that need to be managed at the national level can be selected and systematically managed. This study analyzed the crisis alert levels of two standard manuals related to the case with reference to the contents of the Framework Act on the Management of Disaster and Safety and National Crisis Management Basic Guidelines. According to the Act and Guidelines, crisis alerts are issued before a crisis or disaster, but the criteria of crisis alerts of the two manuals showed that the national crisis had already occurred and the disaster occurred due to a marine vessel accident at the serious level. In addition, the results of timing of issuance of crisis alert were reviewed. If the signs can be identified, a crisis alert may be issued prior to the occurrence of the incident, but a crisis alert cannot be issued when an incident occurs without a sign. In the case of an incident where there are no signs, but there is a possibility of spreading to a national level disaster, the disaster management supervision agency could issue a crisis alert.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.491-500
• /
• 2020

The present study proposes a time domain model for the Vortex-induced Vibration (VIV) simulation of a catenary riser under the combination of the current and oscillatory flow induced by vessel motion. In this model, the hydrodynamic force of VIV comprises excitation force, hydrodynamic damping and added mass, which are taken as functions of the non-dimensional frequency and amplitude ratio. The non-dimensional frequency is related with the response frequency, natural frequency, lock-in range and the fluid velocity. The relatively oscillatory flow induced by vessel motion is taken into account in the fluid velocity. Considering that the added mass coefficient and the non-dimensional frequency can affect each other, an iterative analysis is conducted at each time step to update the added mass coefficient and the natural frequency. This model is in detail validated against the published test models. The results show that the model can reasonably reflect the effect of the added mass coefficient on the VIV, and can well predict the riser's VIV under stationary and oscillatory flow induced by vessel motion. Based on the model, this study carries out the VIV simulation of a catenary riser with harmonic vessel motion. By analyzing the bending moment near the touchdown point, it is found that under the combination of the ocean current and oscillatory flow the vessel motion may decrease the VIV response, while increase the excited frequencies. In addition, the decreasing rate of the VIV under vessel surge is larger than that under vessel heave at small vessel motion velocity, while the situation becomes opposite at large vessel motion velocity.

• Korean Journal of Remote Sensing
• /
• v.37 no.4
• /
• pp.803-813
• /
• 2021

Coastal erosion has been a threat to coastal communities and emerged as an urgent problem. Among the coastal communities that are under perceived threat, Cotonou located in Benin, West Africa, is considered as one of the most dangerous area due to its high vulnerability. To address this problem, in 2013, the Benin authorities established seven groynes at east of Cotonou port, and two additional intermediate groynes have recently been integrated in April 2018. However, there is no quantitative analysis of groynes so far, so it is hard to know how effective they have been. To analyze effectiveness, we used optical satellite images from different time periods, especially 2004 and 2020, and then compared changes in length, width and area of shoreline in Cotonou. The study area is divided into two sectors based on the location of Cotonou port. The difference of two areas is that Sector 2 has groynes installed while Sector 1 hasn't. As result of this study, shoreline in Sector 1 showed accretion by recovering 1.20 km² of area. In contrast, 3.67 km² of Sector 2 disappeared due to coastal erosion, although it has groynes. This may imply that groynes helped to lessen the rate of average erosion, however, still could not perfectly stop the coastal erosion in the area. Therefore, for the next step, we assume it is recommended to study how to maximize effectiveness of groynes.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.13 no.1
• /
• pp.208-222
• /
• 2021

Managing with the presence of sea ice is the primary challenge in the operation of floating platforms in the Arctic region. It is widely accepted that offshore structures operating in Arctic conditions need station-keeping methods as well as ice management by icebreakers. Dynamic Positioning (DP) is one of the station-keeping methods that can provide mobility and flexibility in marine operations. The presence of sea ice generates complex external forces and moments acting on the vessel, which need to be counteracted by the DP system. In this paper, an icevaning control algorithm is proposed that enables Arctic offshore vessels to perform DP operations. The proposed icevaning control enables each vessel to be oriented toward the direction of the mean environmental force induced by ice drifting so as to improve the operational safety and reduce the overall thruster power consumption by having minimum external disturbances naturally. A mathematical model of an Arctic offshore vessel is summarized for the development of the new icevaning control algorithm. To determine the icevaning action of the Arctic offshore vessel without any measurements and estimation of ice conditions including ice drift, task and null space are defined in the vessel model, and the control law is formulated in the task space. A backstepping technique is utilized to handle the nonlinearity of the Arctic offshore vessel's dynamic model, and the Lyapunov stability theory is applied to guarantee the stability of the proposed icevaning control algorithm. Experiments are conducted in the ice tank of the Korea Research Institute of Ships and Ocean Engineering to demonstrate the feasibility of the proposed approach.

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.4
• /
• pp.192-199
• /
• 2022

With the advent of autonomous ships, it is emerging as one of the very important issues not only to operate with a minimum crew or unmanned ships, but also to secure the safety of ships to prevent marine accidents. On-site inspection of the hull is mainly performed by the inspector's visual inspection, and video information is recorded using a small camera if necessary. However, due to the shortage of inspection personnel, time and space constraints, and the pandemic situation, the necessity of introducing an automated inspection system using artificial intelligence and remote inspection is becoming more important. Furthermore, research on hardware and software that enables the automated inspection system to operate normally even under the harsh environmental conditions of a ship is absolutely necessary. For automated inspection systems, it is important to review artificial intelligence technologies and equipment that can perform a variety of hull failure detection and classification. To address this, it is important to classify the hull failure. Based on various guidelines and expert opinions, we divided them into 6 types(Crack, Corrosion, Pitting, Deformation, Indent, Others). It was decided to apply object detection technology to cracks of hull failure. After that, YOLOv5 was decided as an artificial intelligence model suitable for survey and a common hull crack dataset was trained. Based on the performance results, it aims to present the possibility of applying artificial intelligence in the field by determining and testing the equipment required for survey.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.6_2
• /
• pp.773-779
• /
• 2021

CNG, which has recently been attracting attention as an alternative fuel in the transportation field to reduce emissions caused by global warming, is natural gas with abundant reserves and mainly composed of methane. Being in a gaseous state, natural gas requires the compression and liquefaction processes for transportation. Until now, general shut-off valves for liquid and gas piping have been developed in Korea, but there are few studies on shut-off valves for high pressures of about 200 bar. Currently, research on the flow analysis of valves is being actively conducted around the world. However, there are relatively many studies on large valves such as low-pressure valves or shipbuilding and marine, and the safety factor through structural analysis to check the structural integrity of the valve is checked at the design stage. Since it is necessary to have a fast response speed while minimizing pressure and speed loss due to flow change, basic research was conducted on the flow analysis of the valve to secure design data, and the numerical analysis was performed on high-pressure automatic shut-off valves applied to CNG refueling stations. After securing the basic valve shape through reverse engineering for advanced products, we compared the valve flow coefficient Cv coefficient with advanced products. As a result, it was found that the reverse engineering model was at the level of about 60%. However, we compared the Cv coefficient by modifying the reverse engineering model, and the result showed that it was improved to about 96%.