• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.89-93
• /
• 2005

A rear contact solar cell has a potential merit of efficiency improvement by a low shading loss in front surface. a simplified module assembly. and a higher packing density. Among the rear contact solar cells. MWT. metallizationl wrap through MWT solar cells that have the bus bars on the back side and the front side metallization is connected to the back through metal filled laser fired holes in the silicon wafer. This approach has the advantages of a much more uniform appearance. The first fabrication of MWT using a multicrystalline silicon modules in our group showed $12.28\%$ on $125mm{\times}125mm$ active area.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.11
• /
• pp.725-729
• /
• 2014

In this study, a transparent conductive oxide (TCO)-less dye-sensitized solar cells (DSSCs) was fabricated by using titanium (Ti) electrode to replace the Fluorine-doped tin oxide (FTO) for the reduction of manufacturing cost. Ti film was formed by electron beam evaporation method and the results showed the sheet resistance of Ti electrodes with a thikness of 500 nm similar to FTO. In case of power conversion efficiency (PCE), a DSSC with Ti electrodes showed a lower value than that with FTO by 0.38%. For the investigation of the difference, the DSSCs were measured and analyzed by using electrochemical impedance analyzer (EIS).

• Journal of Korean Institute of Industrial Engineers
• /
• v.21 no.1
• /
• pp.137-151
• /
• 1995

A difficult problem in operating Flexible Manufacturing Systems (FMS) is to control the system in real-time by coordinating heterogeneous machines and integrating distributed information. The objective of the paper is to present the models and methodologies useful to resolve the difficult problem. The detailed objectives can be described in three folds. First, a hierarchical Colored and Timed Petri-Net (CTPN) is designed to control an FMS in real-time. The concerned FMS consists of a loading station, several machining cells, a material handling system, and an unloading station. Timed-transitions are used to represent the timed-events such as AGV movements between stations and cells, part machining activities in the cells. Signal places are also used to represent communication status between the host and the cell controllers. To resolve the event conflicts and scheduling problems, dispatching rules are introduced and applied. Second, an implementation methodology used to monitor and diagnose the errors occurring on the machines during system operation is proposed. Third, a Petri-Net simulator is developed to experiment with the designed control logic.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.667-667
• /
• 2013

Optimizing morphology of the front surface with three dimensional structures (3D) in solar cell is essential element for not only effectivelight harvesting but also carrier collection and separation without the cost burden in process. We designed a three-dimensionally ordered front surface with wet chemical etching. Wet chemical etching is a proper way to have three dimensional structures. The method efficiently transmits the incident light at the front surface to a Si absorber and has competitive price in manufacturing when comparing with reactive ion etching (RIE) to have three dimensional structures. This indicates that optimized front surface with three dimensional structures by wet chemical etching will bring effective light management in solar cells.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.23 no.4
• /
• pp.63-73
• /
• 1998

With the success of flexible manufacturing systems(FMSs), flexible assembly systems(FASs) have been developed to automatic factories further. As in a cellular FMS, a celluar FAS is considered as the most flexible and feasible assembly systems configuration. This paper presents a method for the integrated layout design in cellular FASs. Unlike the traditional paper, this paper deals with the formation of cells and the layout of cells for jobs with operation times on different machines. The procedure in this paper consists of two distinct phases. The first phase presents machine arrangement in a double rows flowline. cell formation not to allow intercellular movements, and integrated layout design in cellular FASs considering the characteristics of FAS, layout, and production factors This phase uses older optimal algorithm. The second phase proposes to balance the system with an objective of reducing the degree of workload deviation in the cells. Simulated annealing method is used to balance the system. This phase also shows the integrated layout design in cellular FASs with the cost less than total cost of the first phase.

• Journal of International Society for Simulation Surgery
• /
• v.3 no.2
• /
• pp.49-59
• /
• 2016

3D printing is also known as additive manufacturing technique in which has been used in various commercial fields such as engineering, art, education, and medicine. The applications such as fabrication of tissues and organs, implants, drug delivery, creation surgical models using 3D printer in medical field are expanding. Recently, 3D printing has been developing for produce biomimetic 3D structure using biomaterials containing living cells and that is commonly called "3D bio-printing". The 3D bio-printing technologies are usually classified four upon printing methods: Laser-assisted printing, Inkjet, extrusion, and stereolithograpy. In the bio-printing, bio-inks (combined hydrogels and living cells) are as important components as bio-printing technologies. The presence of various types of bioinks, however, in this review, we focused on the bio-inks which enables bioprinting efficacy using hydrogels with living cells.

• Solar Energy
• /
• v.7 no.2
• /
• pp.7-13
• /
• 1987

Indium-Tin-Oxide (ITO)/Selenium heterojunction solar cells which fabricated by vacuum deposition technique and annealing process has been investigated. Prior to the Selenium deposition, a thin tellurium layer (about $10{\AA}$) was deposited onto the ITO layers to provide a sufficient mechanical bond between the Oxide and Selenium layers. The amorphous Selenium layer was deposited onto the Te-ITO layers, and then the crystallization of the amorphous Selenium was carried out using a hot plate at about $180^{\circ}C$ for 4 min. Efficient Selenium solar cells with conversion efficiency as high as 4.52% under AM1 condition has been fabricated in polycrystalline Selenium layer ($6{\mu}m$). The optimum data in manufacturing Se solar cell was listed in table.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2005.05a
• /
• pp.3-8
• /
• 2005

We introduced mechanical stimuli and micropatterned substrate with micro fibers to investigate the effects of those on neurite outgrowth along with nerve growth factor (NGF) in vitro. Microfiber substrates were fabricated using an electrospinning process. And PC-12 cells cultured on substrates were simulated with nerver growth factor and laminar flow shear stress in a fluid flow system The results suggest that microfiber substrates and fluid-induced shear stress are promising for simulating neuronal regeneration in a desired direction.

• Journal of the Korean Ceramic Society
• /
• v.53 no.5
• /
• pp.478-482
• /
• 2016

Metal-supported SOFCs have been investigated to overcome the disadvantages of ceramic-supported SOFCs, including issues related to mechanical strength and sealing. In the case of ceramic-supported cells, the mechanical support is a brittle ceramic or cermet, and it contains expensive materials. However, metal-supported cells utilize ceramic layers that are only as thick as necessary for electrochemical functioning, thereby compensating for the disadvantages of ceramic-supported cells. The mechanical support is fabricated from inexpensive and robust metals, and the electrochemically active layers are applied directly to the metal support. The metal-supported SOFCs thus can provide a reduced system cost, ease of manufacturing, and operational advantages. Owing to these features, metal-supported SOFCs are a very promising candidate for commercialization. Given the importance of studying worldwide trends in metal-supported SOFC research for performance evaluation, this paper reviews development trends with a focus on fabrication methods. Furthermore, a novel fabrication method developed in KAIST is discussed.

• Journal of the Korean Society for Precision Engineering
• /
• v.7 no.2
• /
• pp.58-64
• /
• 1990

As the miniature load cells have small inner space and sensing elements of which are thin and very sensitive to manufacturing conditions, it is very difficult to predict the rated outputs and control them by using the compensation resistor. The very useful equation has been derived for calculation of theoretical rated outputs for diaphragm type miniature load cells when commercial diaphragm strain gages are used. Four diaphragm type miniature load cells of which capacities are from 300 N to 1, 000 N and outer diameters are 20 mm and 26.5 mm are manufactured. The differences between calculating results and actural ones are less than 5%. According to numerical analysis the decrease of rated outputs caused to main error is examined in existence of loading button.