• Microbiology and Biotechnology Letters
• /
• v.46 no.3
• /
• pp.201-209
• /
• 2018

Streptococcus thermophilus, Lactobacillus delbrueckii, Lactobacillus fermentum and Lactobacillus casei were successfully isolated from indigenous Indonesian fresh milk based on the general morphological and biochemical classification as described in Bergey's manual. Verification was conducted by sequencing of 16S rRNA after selection using the classification method mentioned in the manual. All isolates exhibited antimicrobial activity against Escherichia coli and Staphylococcus aureus in the well diffusion test. The susceptibilities of the isolated S. thermophilus 24/S1 and L. delbrueckii 94/L4 against 22 different antibiotics were determined by the disc diffusion method and variable susceptibility patterns were observed. Both isolates were susceptible to amoxicillin, the most commonly prescribed antibiotic, and resistant to sulfonamide. The presence of a plasmid was not detected after extraction. S. thermophilus 24/S1 and L. delbrueckii 94/L4 starter cultures were prepared for yogurt production after 9.5 h of incubation and the yogurt was evaluated for its flavor and quality by 30 volunteers. A score of $4.93{\pm}0.45$ out of 7 was obtained as compared to the yogurt prepared using commercial starter cultures which yielded a score of $4.76{\pm}0.30$ out of 7.

• Physical Therapy Rehabilitation Science
• /
• v.12 no.1
• /
• pp.19-25
• /
• 2023

Objective: Patients with scoliosis complain of various symptoms such as muscle imbalance, dysfunction, back pain, abnormal posture and gait abnormality. The most basic treatment for scoliosis is to observe the progress based on conservative treatment. Therefore, in this case report, the effect of cytoskeletal manual therapy (CMT), a soft tissue mobilization technique, on pain intensity, muscle thickness, and pressure pain threshold (PPT) in a patient with scoliosis was investigated. Design: A case report Methods: A 25-year-old male diagnosed with scoliosis visited the Neuromusculoskeletal Science Laboratory with chronic back pain. In the laboratory, scoliosis was confirmed through the X-ray image used for his diagnosis, and it was confirmed again through Adam's forward bending test. Pain, pressure pain threshold and muscle thickness were measured to compare the immediate effects of CMT applied in the laboratory for 40 minutes. Treatments were visited two weeks after the first visit and outcome measures were assessed after a total of two visits. Results: After receiving CMT up to the second session, the pain intensity decreased by 4 points and the screening angle decreased by 15 degrees. Muscle thickness decreased in all but 10 mm on the dominant side of the thoracic spine. All of the PPTs increased, and the greatest increase was 3.1 lb on the dominant side of the thoracic spine. Conclusions: CMT showed positive improvement in pain during trunk flexion, spinal curvature, muscle imbalance, and pressure pain, which is considered as an ancillary treatment option for scoliosis management.

• Microbiology and Biotechnology Letters
• /
• v.18 no.5
• /
• pp.443-448
• /
• 1990

The objective intended for this study is that of providing a fairly practical guide to the use of natural pigment in the food industry. Streptomyces isolated from soil were carried out test for the excretion of their bluish purple pigment. One strain of Streptomyces, strain KS-89 showed a high production of bluish purple pigment on the glycerol starch-glutamate medium. The morphological and physiological characteristics of the strain KS-89 were studied according to the methods of Bergey's manual, Nonomura's classification, and Ridham and Lyons classification. Based on the results obtained in these experiments, strain KS-89 was identified as Streptomyces californicus.

• IE interfaces
• /
• v.16 no.4
• /
• pp.515-525
• /
• 2003

In this study, a prototype liquid container combined with auxiliary handles was designed to increase the safety of manual handling and protect from contamination of hands of people who use these containers. Likert summated rating method as well as pairwise ranking test was applied to evaluate the user preferences for provided handles of the container under the conditions of different shapes and positions. The results show that the subjects preferred perpendicular orientation of the handle on the top of the liquid container while carrying the containers and the crosswise position of the handle at the side of the container while pouring the liquid were preferred. A prototype liquid container with provided auxiliary handles was developed based on the results of evaluation. It is thus recommended that the liquid container provide extra handles to reduce the musculoskeletal stress and in turn to increase the user satisfaction.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.5
• /
• pp.8-14
• /
• 2015

Heat treatment for car body molds is mainly a manual process performed by a worker. The performance of this process is affected by workers' skill level, and has limitation in maintaining uniform product quality. In this study, we developed a diode laser heat treatment robot system that implements an OLP type simulator to overcome the limitation of manual process, and to improve and stabilize the quality level. In addition, we verified the efficiency of the robot system and mechanism stability from the early stage through design verification and simulated analysis in the development stage. In addition, we carried out a field test to study the way to establish optimized D/B for diode laser heat treatment criteria for car body molds, such as heat treatment speed, interval, etc. via site experiment.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.04a
• /
• pp.309-314
• /
• 2001

The balance of high speed spindle system with high precision rotation like grinding machine is very important. Traditionally, we use trial and error method to balance the spindle. It takes much time. So we are developing the automatic balancing equipment being used in the grinding machine. The balancing head we develop is wireless. It will be used high-speed grinding machine. We use influence coefficient method to control the automatic balancer. Experiments are based on automatic and manual balancing. We perform test of the vibration filter. It helps to remove noise. The filter and experiments with automatic balancing controller show that automatic balancing control can be successfully achieved with the quick response and good stability characteristics.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.11
• /
• pp.1720-1724
• /
• 2012

This study describes an oscillometric-based blood pressure measuring algorithm by detecting turning points of oscillation signal from digitally filtered cuff signals of an automatic sphygmomanometer. The blood pressure measuring algorithm uses a characteristic ratios method from the turning points. The accurate values of the systolic/diastolic blood presures(SBP/DBP) are calculated using the peaks in the ranges of characteristic ratios. Performances of the proposed algorithm and four automatic sphygmomanometers are compared with the mercury manometer(manual type sphygmomanometer), regarding the SBP and DBP values of manual sphygmomanometer as the reference values. The performance test showed the proposed algorithm revealed the best results in errors and a statistical analysis. Therefore this algorithm can be usable in any automatic sphygmomanometers.ssure states. This may be compromising results for subject-independent sensibility evaluation using EEG signal.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.4
• /
• pp.146-153
• /
• 2004

This paper presents a discrete analysis approach to investigate the performance of dual mass flywheel (DMF). In the discrete analysis, arcspring installed between the flywheels is modeled as N- discrete elements. Each element consists of mass, spring and nonlinear friction element. LuGre friction model is used to describe nonlinear friction characteristic. Based on the dynamic models of the DMF, clutch, engine, manual transmission and vehicle, a DMF performance simulator is developed using MATLAB Simulink. Simulation results of the engine speed, driveshaft torque and vehicle velocity are compared with test results. It is found that the discrete DMF model describes the vehicle behavior closely, especially during the clutch actuation period.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.424-428
• /
• 2004

A wind turbine system converts wind energy into electric energy, the system operated under normal environmental conditions. In case of particular turbulent wind flow such as typhoon, hurricane etc, the control of a blade used to a yaw control and a pitch control method. A small wind turbine has not a speed control system to only a manual tail safety brake. This paper shows a automatic tail safety brake controller based on feedback control using wind velocity. The controller composed of wired motor, relay system, steel wired motor him down a perpendicular to wind flow and then the blade speed reduced high to zero. The operation of automatic tail safety controller verified by manual test.

• Korean Journal of Occupational Health Nursing
• /
• v.24 no.3
• /
• pp.235-244
• /
• 2015

Purpose: The purpose of this study was to identify factors influencing exercise behaviors of the male manual workers and office workers based on health promotion model by examining the relationships among them, and then to provide basic information for developing exercise program. Methods: The 97 laborers and 99 officiers were collected from two worksites. Data were analyzed using descriptive statistics, t-test, ANOVA, Pearson's correlation coefficients and multiple regression. Results: Male laborers' exercise behavior was significantly influenced by exercise self-efficacy, exercise social support and exercise experience over 3 months, and these factors explained 50.2% of the total variance. Male officiers' exercise behavior was significantly influenced by exercise self-efficacy, subjective health status, perceived exercise barriers and exercise social support, and they explained 47.3% of the total variance. Conclusions: Based on the findings that exercise self-efficacy and exercise social support commonly influence exercise behavior of male laborers and officiers, there is a need to develop an exercise program to improve exercise self-efficacy and exercise social support.