• Korean Security Journal
• /
• no.25
• /
• pp.1-25
• /
• 2010

This research aims to provide a solution for the improvement of private security according to the change in criminal environment. The main cause of crime can be found in the anti-functional dimensions including value set disorder, social phenomenon variation, information-based, globalization and urbanization. In this environment, the private security sector has dramatically increased in a quantitative viewpoint, but it is insufficient in a qualitative viewpoint. This paper recognized this problem and demonstrates a solution for improvement through classifying elements of private security into relevant legislation, education institutions, security companies and security associations. The analysis result is a follows: First, motivation and satisfaction rate of escort and security related major has shown to be high. However, respondents evaluated the guard educational institution negatively. Second, the motivation of entering into the private security sector for internal staffs has shown to be positive and sound. However, the job satisfaction rate has shown to be low due to excessive competition, negative perception of occupation and low earning. Third, respondents gave an average mark to the Security Association's management and operation. In addition, the mutual-aid project received the same mark. Negative feedbacks were given to the protection of member's interest and to association operation and policy, while positive feedbacks were given to the degree of member's cooperation towards association policies.

• Journal of the Korean Society for Library and Information Science
• /
• v.50 no.4
• /
• pp.97-120
• /
• 2016

This study is to objectively deduce components of a public library culture and define a library culture. Thus, the study gathers the opinions and the experiences of the expertise in this specific area of a library culture. Furthermore, the study takes gathered informations and dates into consideration, to derive a measurement of final components, delphi technique. Through usage of Delphi technique, it allowed selected final components to operate a comparative analysis of the elements, which then it helps to measure each element's critical importance, identify priorities of each element by using a hierarchical decision making method. The major conclusions of this study are as follows. First, the study used a two-step delphi survey which was conducted on a panel of experts (Faculty of Library and Information Science (LIS) and the librarians), deduced the components of a library culture. In the primary survey, the study found 29 components (material culture 6, non-material culture 23). In the secondary survey, it deduced 21 components (material culture 3, non-material culture 18). Second, through comparative analysis, the prioritization of the public library culture components presented in following orders, , , and . The Most weighted values of each components were, of 'data usage and its method.'; of 'core values of librarianship'; of 'library ethical consciousness.' appeared as such.

• Journal of Conservation Science
• /
• v.25 no.4
• /
• pp.451-464
• /
• 2009

To do conservation for ceramics, sometimes it needs to clean the ceramics chemically to remove stains on the ceramics, which should be performed with caution. This study will provide quantitative data about the extraction characteristics of major elements from ceramics through the soaking test to evaluate the stability of ceramic cleaning agents. As soft textured pottery(fired at $700^{\circ}C$) had high absorption, it showed higher extraction characteristics in short soaking time. Especially the strong acid among chemical cleaning agents caused the expoliation and the color change on the surface of soft textured pottery. But these color change had no effect on the physical characteristics of soft textured pottery. The hard textured pottery(fired at $1,000^{\circ}C$) is relatively stable in the cleaning agent because it is ascertained the extraction of that was not enough and also it had little chromatic and physical change by strong acid. Porcelains(Celadon, Whiteware and Puncheong ware) was safer than the soft textured pottery due to their low extraction. But it should take precautions to clean the porcelains with lots of cracklewares such like Puncheong ware chemically in connection with the extraction characteristics and their cracklewares.

• Journal of Conservation Science
• /
• v.26 no.1
• /
• pp.1-12
• /
• 2010

The crucibles of Baekje Kingdom from the Ssangbukri Site which were used for glass and metal melting had light brown, grayish blue and grayish brown colored bodies. In thin section, the crucibles contained numerous quartz grains and pottery fragments. The surface was covered with fine grained quartz for thermal resistance. Based on decomposition of mica group minerals and formation of mullite detected by X-ray diffraction analysis, it was inferred that all crucibles have been fired over $1,000^{\circ}C$. It was also found that firing temperature has exceeded $1,100^{\circ}C$ in some crucibles because feldspar was not detected. The maximum temperature was assumed at $1,200^{\circ}C$. The magnetic susceptibility values and geochemical characteristics sorted out the crucibles into two groups that differed from the characteristics of the local soils. This reflected geological setting of the site where the alluvium was formed from two kinds of surrounding rock masses, granite gneiss and biotite granite. However, the local soils had similarities with the crucibles in weathering degree and geochemical behavior of major elements. In consequence, it was considered that the raw clay of the crucibles was supplied from the local area of the site.

• Journal of Conservation Science
• /
• v.30 no.2
• /
• pp.205-217
• /
• 2014

The stone artifacts in Bronze age from the Sinsongri sites in Seosan, Korea were studied on material characteristics and provenance presumptions. The use and rock names of the artifacts are a stone before processing, two semifinished stone arrowheads and a grinding stone plate by slates. In addition, there is semifinished stone arrowhead by andesitic rocks. The slate could be observed easily around the site, and the andesitic rock could be confirmed typical occurrences of the all kinds of rocks around the Kanwoldo and Hwangdori, Anmyun area above 10km from the site. As a result of analysis which is comparing between stone artifacts and same kinds of raw material rocks, the stone artifacts made by slates have similar lithology and geochemical characteristics however, the stone artifacts made by andesitic rocks are found a some different part of characteristics to the same kind of raw material rocks. Comparing of major, rare earth, compatible and incompatible elements about stones artifacts made by slates and by the same kinds of raw material rocks have same geochemical patterns. However stone artifacts made by andesites and the raw material rocks are confirmed some differences of geochemistry. Therefore the slate stone artifacts in Sinsongri site suggest that these are domestic-type which are made of the rocks around the site, and it was understood that the andesitic stone artifacts are foreign-type which need to get more geological survey and study about different volcanic artifacts of the site around the area.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.1
• /
• pp.17-23
• /
• 2008

In this study, plasma processing of metal surface is experimentally investigated to enhance the surface decontamination efficiency and to find out the reaction mechanism. Cobalt, the major contaminant in the nuclear facilities, and three fluorine-containing gases, $CF_4/O_2$, $SF_6/O_2$, and $NF_3$ are chosen for the investigation. Thin metallic disk specimens are prepared and their surface etching reactions with the three plasma gases are examined. Results show that the maximum etching rate of $17.2\;{\mu}m/min.$ is obtained with NF3 gas at $420^{\circ}C$, while with $CF_4/O_2$, $SF_6/O_2$ gas plasmas those of $2.56\;{\mu}m/min.$ and $1.14\;{\mu}m/min.$ are obtained, respectively. Along with etching experiments, constituent elements of the reaction products are identified to be cobalt, oxygen, and fluorine by AES (Auger Electron Spectroscopy) analysis. It turns out that the oxygen atoms are physically adsorbed ones to the surface from the ambient not participation ones during the analysis after reaction, which supports that the surface reaction of cobalt is mainly to be a fluorination reaction.

• Journal of Engineering Education Research
• /
• v.9 no.2
• /
• pp.34-51
• /
• 2006

In knowledge based society of 21c, engineers require not only their own speciality but also engineering basic competency such as creative thinking, the ability of working together, the ability of communication. Engineering colleges responsible for educating engineers consider developing curriculum including Engineering Basic Competency which is reflecting the needs of the times. By utilizing the accreditation programs of engineering education, UK-SPEC of UK Engineering Council, EA(Engineering Australia) standards/handbook of the Institute of Engineers Australia, O*NET of U.S. Occupational Network, this study generates core elements of engineering basic competency to prove the capability of engineering basic competency required to desired engineers. Core constituents derived from the study were categorized into 3 major areas of the basic engineering literacy in Humanities and Social Sciences(HSS), the ability of Creativity Engineering Design, Career development and each category and constituents were surveyed and checked by engineers in the field to deduce engineering basic competency that should be educated in the engineering college.

• Journal of the Korean Society of Food Culture
• /
• v.15 no.4
• /
• pp.253-258
• /
• 2000

The chemical components of Korean rice germ were analyzed. Proximate compositions of rice germ were as follows; crude lipid 21.18%, crude protein 16.50%, crude fiber 2.95%, crude ash 6.23% and carbohydrate 44.45%. Free sugar compositions were as follows; fructose 50.20mg/100g, glucose 68.80mg/100g, maltose 569.00mg/100g. Major amino acids of rice germ are glutamic acid (1920.9mg/100g), arginine (1503.7mg/100g), aspartic acid(1208.7mg/100g) and leucine (1039.7mg/100g). Fatty acid compositions of rice germ lipid extracted by chloroform-methanol (2:1) were palmitic (22.2%), linoleic acid (38.9%), oleic acid (24.7%) and palmitic acid (22.2%). Mineral elements were phosphorus (1766.22mg/100g) and potassium (1217.80mg/100g). Vitamins were composed of Vit E (11.96mg/100g) Vit B1 (5.69mg/100g) and niacin (2.96mg/100g). 16 flavonoids and 9 phenolic acids in rice germ were not detected. Above the chemical components of rice germ were compared with that of rice endosperm and wheat germ.

• Korean Institute of Interior Design Journal
• /
• v.23 no.3
• /
• pp.173-180
• /
• 2014

Dwelling connotes characteristics like social and cultural and technical climatic conditions, lifestyles and demands of regions, and especially, apartment, as one of dwelling types, shows various aspects of modern society. With the economic development centering on large cities, apartments have been established as universal housing forms in Seoul and Shanghai. The deepening of economic development in cities has increased small households consisting of one or two persons by affecting the population and household structure, and they've become information consumer groups. This has also influenced the size of apartment and increased the demand for small-sized housing. If the floor area is small, it is possible to use space widely according to the plan composition, so there is a need for floor planning to understand natural environment, physical environment and residents.This study compared and analyzed plan compositions of small-sized apartments which have been parceled out for the recent three years in Seoul and Shanghai. This study aims to understand housing cultures and users in the two countries depending on natural environments, living habits and spatial functions by analyzing common points and differences of public spaces like living room, dining room and kitchen, and private spaces like bedroom which have absolute effects on room arrangement and traffic line. The study results are as follows. From the perspective of natural environments, in Seoul, two-sided open cross-ventilation structure where is favorable to lighting and ventilation, occupied the biggest proportion of public space, while in Shanghai, most public spaces had lighting and ventilation structures through windows in each room. In Seoul, 3R type occupied the largest proportion of private space(87.7%), and privacy was maintained and space scale was adjusted using spaces with diverse functions such as bathroom in the couple bedroom, dress room and powder room and variable walls. But 2R type occupied the largest proportion of private space(60.2%) in Shanghai, and they emphasized private space and privacy of each room depending on major living habits. In conclusion, this study for comparing and analyzing common points and differences of small-sized apartment plan compositions in Seoul and Shanghai will provide proper guidelines for small-sized apartments to be built in Seoul and Shanghai in the future, if strong points and weak points of plan compositions in the two countries will be additionally analyzed and remedied.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.3
• /
• pp.329-338
• /
• 2016

As the need of indoor spatial information has grown, many applications have been developed. Nevertheless, the major representations of indoor spatial information are on the 2D or 3D, recently, the service based on omni-directional image has increased. Current service based on omni-directional image is used just for viewer. To provide various applications which can serve the identifying the attribute of indoor space, query based services and so on, topological data which can define the spatial relationships between spaces is required. For developing diverse applications based on omni-directional image, this study proposes the method to generate IndoorGML data which is the international standard of indoor topological data model. The proposed method is consist of 3 step to generate IndoorGML data; 1) Analysis the core elements to adopt IndoorGML concept to image, 2) Propose the method to identify the element of ‘Space’ which is the core element of IndoorGML concept, 3) Define the connectivity of indoor spaces. The proposed method is implemented at the 6-floor of 21centurybuilding of the University of Seoul to generate IndoorGML data and the demo service is implemented based on the generated data. This study has the significance to propose a method to generate the indoor topological data for the indoor spatial information services based on the IndoorGML.