• Ocean and Polar Research
• /
• v.42 no.1
• /
• pp.33-47
• /
• 2020

The bulk and partition geochemistry was studied in two sediment cores collected from the axial valley of the north-central Fonualei Rift and Spreading Center (FRSC), Lau back-arc Basin, southwest Pacific. The sediments consist of mostly volcanic ash, although minor amounts of biogenic and other components were present in some intervals. The major element composition of bulk sediments recalculated to a carbonate-free basis was in good agreement with the magma compositions of the adjacent Tofua Arc and the FRSC, with only significant difference in Mn content. The enrichment of Mn and other associated elements (e.g. Cu, Co, Ni, and P) is attributed to hydrothermal input to the sediments, as evidenced by their significant partitioning in the non-detrital phases according to the partition geochemistry. Hydrogenetic and diagenetic inputs were assessed to be relatively insignificant. Estimated hydrothermal Mn fluxes during the Holocene ranged between 5.0 and 37.1 mg cm^-2 kyr^-1, with the higher values in younger sediments, suggesting enhanced hydrothermal activity. The hydrothermal Mn fluxes comparable to or higher than those reported from other spreading centers with strong hydrothermal activities may indicate the presence of unknown hydrothermal vent sites and/or topographic restriction on the dispersal of hydrothermal plumes in the northern part of the FRSC.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.9
• /
• pp.41-47
• /
• 1999

The scale of dendritic structure of a cast preform plays a key role in determining the mechanical properties of cast/forged products. In this study, casting experiments are carried out to reduce dendrite arm spacing (DAS) to smaller than 20 ${\mu}$m by increasing cooling rate of the mold and then to spheriodize dendritic structures by addition of alloying elements such as Zr and Ti-B. From the casting experiments, appropriate casting conditions for producing the cast preform of a motorcycle connecting rod are obtained. To obtain fine microstructures of the cast preform, mold temperature must set to be low whilst cooling rate being high. When cooling rate is 10 $^{\circ}C$/s, the size of DAS is 17.4 ${\mu}$m. And the degree of spheriodization of a grain in the cast preform is described by aspect ratio, which is defined as the ratio of major and minor radii of an elliptical grain. When 0.5% Zr and 0.24 % Ti+B are added to the molten aluminum alloy, the best aspect-ratio 0.75 is obtained. After forging the cast preform of a motorcycle connecting rod, the microstructure and mechanical properties of the cast preform are compared with those of the cast/forged product. Cast/forged products are superior in microstructure and in mechanical properties such as ultimate strength, elongation, and hardness.

• Economic and Environmental Geology
• /
• v.12 no.4
• /
• pp.181-195
• /
• 1979

The Nambu orebodies of the Okbang tungsten mine are hosted in the Precambrian amphibolite and Weonnam formation. These orebodies can be classified into two types; The scheelite-bearing ore vein occurring in the amphibolite (the Nambu 1, 2 adits) and tungsten-bearing quartz vein along the contact between the amphibolite and the Weonnam formation (the Young-ho, -1, -2, -3 levels). The scheelite-bearing ore vein in the amphilbolite is discontinuous, narrow, and highly irregular in geometry, occurring only within the amphibolite with which of the vein is graduational. Based on these feature of the mode of occurrence, the origin of this ore type might be attributed to a potential segregation of tungsten ore fluid in situ from hornblenditic basic magma of the host rock. Tungsten-bearing quartz vein, however, is considered to have deposited along the N30-60E trending fractures as a later hypothermal vein after the hornblendite was emplaced. The principal ore mineral is scheelite with minor amount of wolframite, and the gangue minerals are quartz, and small amounts of fluorite, pyrrhotite, chalcopyrite and calcite. Fluid inclusion study of minerals from the Nambu orebody reveals that the fluids in fluorite of the scheelite-bearning ore vein attained a temperature range of $208{\sim}256^{\circ}C$ and those in quartz from the tungsten-bearing quartz vein a temperature range of $220{\sim}357^{\circ}C$. The real formation temperatures can be somewhat higher than filling temperatures, if pressure correction is made. Chemical analysis of 8 amphibolitc samples on major and some trace elements indicate that the amphibolite is igneous origin. On a Niggli diagram (al-alk)versus c, the analytical values are plotted on an igneous field, and on a Niggli diagram mg versus c they follow a karroo igneous trend line. According to the Ba, Cr, and Ni versus Niggli mg plots suggested by Leake (1964), Okbang amphibolite fall outside a pelitic field and compare favorably with his plots form ortho-amphibolites. Analitical values of $MoO_3$ of 8 samples of scheelite minerals from the Nambu orebody indicate that the tungsten-bearing quartz vein (type n) of Nambu orebody shows a range from 1. 69% to 4.38% which is higher than 0.94%~3.25% $MoO_3$ for the scheelite-bearing ore vein (type I). This fact indicates that the type II was deposited in a lower $fO_2/higher$ $fO_2$ environment and under lower temperature than the type I. Analysis of major components $WO_3$, MnO, and FeO of 6 samples of wolframite from the type II veins revealed that they contain 73.35~76.2% $WO_3$, 7.94~11.63% MnO, and 10.53~14.82% FeO. MnO/FeO ratios of wolframite shows the range of 0.85~1.17 which suggests a slightly higher temperature type of deposits than other major tungsten deposits in the country.

• Journal of the Mineralogical Society of Korea
• /
• v.22 no.3
• /
• pp.199-206
• /
• 2009

The aim of this study is to investigate the relations among each white stone and their characteristics through the chemical and mineralogical analysis of them excavated from around some kilns in archaeological sites. Moreover it was intended to infer the function of kilns. Nine white stones were chosen from three different archaeological sites, the each name of which is Sanyang-ri, Youngdu-ri and Gwangdae-ri in Chungcheongnam-do. In the mineralogical characteristics of thin section, eight stones containing calcite are altered and recrystallized by metasomatism and hydrothermal process, and Calcites, major component minerals of limestone, were identified by the analysis of XRD. On the basis of this result, we can infer the stones to be classified into limestone groups. One the other hand, research revealed that one of the white stones was a white pelitic stone composed of quartz, microcline and muscovite. In the analysis of chemical composition, except for the white pelitic stone eight stones are mainly composed of CaO which is major component of Calcite. Besides, as a results of correlation analysis by using a chemical compositions of major and minor elements in white stones, little did each archaeological site have the relativity. In conclusion, each archaeological site was estimated that they would use a limestone ores extracted from different deposits, and there is a high possibility that the function of these kilns is to produce quicklime.

• Economic and Environmental Geology
• /
• v.32 no.6
• /
• pp.611-631
• /
• 1999

Enviromental geochemisty and heary metal contamination at the Kongjueil mine creek were underaken on the basis of physicohemical properties and mineralogy for various kinds of water (surface, mine and ground water),soil, precipitate and sediment collected of April and December in 1998. Hydrgeochemical composition of the water samples are characterized by relatively significant enricant of Ca+Na, alkiali ions $NO_3$ and Cl inground and surfore water, wheras the mine waters are relatively eneripheral water of the mining creek have the characteristics of the (Ca+Mg)-$(HCO_3+SO_4)$type. The pH of the mine water is high acidity (3.24)and high EC (613$\mu$S/cm)compared with those of surface and ground water. The range of $\delta$D and $\delta^{18}O$ values (relative to SMOW) in the waters are shpwn in -50.2 to -61.6% and -7.0 to -8.6$\textperthousand$(d value=5.8 to 8.7). Using computer program, saturation index of albite, calcite, dolomite in mine water are nearly saturated. The gibbiste, kaolinite and smectite are superaturated in the surface and ground water, respectively. Calculated water-mineral reaction and stabilities suggest that weathing of silicate minerals may be stable kaolinite owing to the continuous water-rock reaction. Geochemical modeling showed that mostly toxic heavy metals may exist larfely in the from of metal-sulfate $(MSO_4\;^2)$and free metal $(M^{2+})$ in nmine water. These metals in the ground and surface water could be formed of $CO_3$ and OH complex ions. The average enrichment indices of water samples are 2.72 of the groundwater, 2.26 of the surface water and 14.15 of the acid mine water, normalizing by surface water composition at the non-mining creek, repectively. Characteristics of some major, minor and rate earth elements (Al/Na, K/Na, V/Ni, Cr/V, Ni/Co, La/Ce, Th/Yb, $La_N/Yb_N$, Co/Th, La/Sc and Sc/Th) in soil and sediment are revealed a narrow range and homogeneous compositions may be explained by acidic to intermediate igneous rocks. And these suggested that sediment source of host granitic gneiss colud be due to rocks of high grade metamorphism originated by sedimentary rocks. Maximum concentrations of environmentally toxic elements in sediment and soil are Fe=53.80 wt.% As=660, Cd=4, Cr=175, Cu=158, Mn=1010, Pb=2933, Sb=4 and Zn=3740 ppm, and extremely high concentrations are found are found in the subsurface soil near the ore dump and precipitates. Normalizing by composition of host granitic gneiss, the average enerichment indices are 3.72 of the sediments, 3.48 of the soils, 10.40 of the precipitates of acid mine drainage and 6.25 of the soils near the main adit. The level of enerichment was very severe in mining drainage sediments, while it was not so great in the soils. mineral composition of soil and sediment near the mining area were partly variable being composed of quartz, mica, feldspar, chlorite, vermiculite, bethierin and clay minerals. reddish variable being composed of quartz, mica, feldspar, chlorite, vermiculite, bethierin and clay minerals. Reddish brown precipitation mineral in the acid mine drainage identifies by schwertmanite. From the separated mineralgy, soil and sediment are composed of some pyrite, arsenopyite, chalcopyrite, sphalerite, galena, malachite, goethite and various kinds of hydroxied minerals.

• The Korean Journal of Quaternary Research
• /
• v.22 no.1
• /
• pp.1-12
• /
• 2008

We investigated metal concentrations and oceanic environment changes that have occurred over the past several years by studying the hard coral Porites lutea, which inhabits tropical and subtropical areas. Soft X-radiographs clearly showed distinctive annual bands within 71 mm coral sample, which reflect changes in the oceanic environment over this period. There were large fluctuations in the major and minor element concentrations. Considering the physicochemical partition coefficient, some elements accumulated in the aragonite matrix in a mechanical manner, while others were affected by environmental factors. The concentrations of some heavy metals varied over a wide range, implying local environmental effects. The variation of Sr/Ca and Mg/Ca in coral skeleton clearly showed large-scale fluctuation over the specific intervals, implying environmental changes during this period. The concentrations of heavy metals also show high fluctuations, and roughly accord with Mg/Ca variation. In addition, Cu and Zn seem to show cyclicity-like peaks, coincide with Mg/Ca variation over the specific intervals. Such variation might be related to local pollution and oceanographic changes. More detailed investigation is necessary, including the pretreatment of coral skeleton sediment.

• Economic and Environmental Geology
• /
• v.52 no.3
• /
• pp.213-221
• /
• 2019

The Wugang banded iron formation (BIF) is located within the Taihua complex at the southern margin of the North China Craton (NCC). In this study, we analyzed major elements and rare-earth elements in iron ores from the Wugang BIF, to study the type of BIFs and their formation mechanism in combination with previously-published data from the literature. We found that the iron ores from the Wugang BIF display two types of banding textures, which can be described as weak banding or no banding. The samples are composed of coarse-grained magnetite, quartz, pyroxene, and amphibole. Based on our geochemical results, mixing of a hydrothermal fluid with sea water led to the precipitation of the Wugang BIF, and there is evidence of crustal contamination. These results, combined with previous literature data, almost all of the iron ores lack Ce anomalies, though some samples show negative Ce anomalies. Our results indicate that the Wugang BIF was formed in a dominantly reducing environment, although the surfaces were relatively oxidized. Geochemical evidence suggests that the Wugang BIF iron ores were formed in a near-shore continental-shelf environment or in a back-arc basin. The BIF is known as interbedded with migmatite, amphibole gneiss, minor quartz and marble, which indicating lack of volcanic materials input. This study, combined with previous results on geochemical interpretation of related wall rock of Wugang BIF, demonstrated that Wugang BIF belongs to Superior-type BIF.

• Journal of the East Asian Society of Dietary Life
• /
• v.13 no.1
• /
• pp.56-63
• /
• 2003

The dough fermentation and the quality of bread prepared with different kinds of water such as distilled water, tap water and diluted hot spring water(SW) from Gyungsan Sipan hot spring were investigated. Content of total soluble solid in the hot spring water was 8,765 ppm and contents of Na, Ca, Mg and K as major elements was 2,296, 287, 65 and 8 ppm, respectively. Content of Fe, Cu, Co, F, Zn, Al, S, Mo, Se and Si as minor elements was in the range of 0.002~5.2 ppm. The pH(6.95~7.68) of the dough prepared with diluted hot spring water(I, 55 times; II, 4 times; III, 2 times) was higher than that of distilled water. The dough volume after the 1st fermentation was expecially lower in the III, but the volume of the dough prepared with III adjusted pH to 5.5 was higher than that of the control. The hardness and the strength were higher than those of the control, but the scores were love. than those of the control in case of pH adjustment(pH 5.5). The cohesiveness was also lower than that of the control in the bread with diluted hot spring water. Softness and stickiness of the bread(III) were hisher than those of the control. But overall acceptability was the highest in the II.

• Analytical Science and Technology
• /
• v.10 no.6
• /
• pp.439-444
• /
• 1997

Twelve kinds (1set) standard materials of chemical ingredients of lead zirconate titanate[$Pb(ZrTi)O_3$] have been developed in order to determine fast and accurate measurement of X-ray fluorescence spectrometry. Especially, we used diluted(ahout sixteen times) filling compound($Li_2B_4O_7/LiBO_2=4/1$) to consider removal effect of matrix, storage convenience, and homogenous characteristics. As a result from the four different laboratories, we obtained extremly good agreement about the standard curve on twelve standard materials which containing eleven elements, PbO, $ZrO_2$, $TiO_2$, SrO, $WO_3$, $La_2O_3$, $Cr_2O_3$, MgO, $Nb_2O_5$, and $MnO_2$. The correlation factor of standard curve was over 0.998. However, ZnO has relatively low correlation factor, 0.977, because the concentration was 10ppm lower than other original materials. This analysis reveals that ZnO has shown the poor linearity as well as low fluorescence intensity. In present work, XRF standard materials are useful for determining a rapid and accurate results for major and minor elements concentration among PZT.

• Economic and Environmental Geology
• /
• v.11 no.3
• /
• pp.89-98
• /
• 1978

Mineralogy, beneficiation, and processes of titanium ores are reviewed from petrographic viewpoints. The most important titanium minerals are ilmenite ($FeTiO_3$) and rutile ($TiO_2$). Ilmenite will play major role :for raw material, because rutile are rapidly diminishing. Thus, there is a need to develope a successful process for producing high grade Ti02 from ilmenite. Commercial, as well as R and D processes to treat more abundant ilmenite ores fall in three general classess: 1. Iron in ilmenite is partially or completely reduced and separated either physically or chemically. 2. Iron is reduced to ferrous state and chemically leached away from the titanium. 3. Ore is treated to make chlorides either selectively or with subsequent separation and purification of $TiC_4$. Routes and efficiencies of these process technologies are primarily influenced by the particular ore deposit to be mined and secondly by environmental considerations. One deposit parameters which influence ilmenite process technologies are: 1. Complexity of microtextures of ilmenite intergrown with Fe-oxide minerals. 2. Composition of concentrates; ilmenites contain minor amounts of substituted Mg, Mn, and V. These elements plus iron and gangue minerals can cause difficulties to complete reactions, substantial acid consumption, difficulties of removing waste solids, and waste disposal problems. Major contributions to be made by petrologists for process optimization are: characterization and interpretation of compositional and physical changes of raw materials and solids derived from process streams. These informations can play significant role in selecting and improving process steps for titania production.