• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.4
• /
• pp.643-652
• /
• 2021

Accidents or faults in the transmission and distribution system are never completely avoidable, and short-circuit and earth faults are occurs despite the efforts of the TSO and DSO. Recently, the connection to the transmission and distribution system of large-capacity new and renewable distributed power has increased rapidly and has various effects on the operation of the system. In order to minimize this, connection standards such as FRT (Fault-Ride-Through) have been established to provide wind turbines or solar inverters. In the event of a major faults of the power system, the operation support shall be provided so that the operator can stably operate the system by smoothly performing connection maintenance or rapid system separation. In this paper, in order to appropriately determine whether the FRT condition, which is the grid connection criterion for a representative DERs, is sufficient, a detection system using a PMU (Phasor Measurement Unit) that measures a synchro-phasors was designed and deployment and a system accident due to a generator step-out to analyze and evaluate the proposed system based on the case.

• Journal of Urban Science
• /
• v.10 no.1
• /
• pp.29-37
• /
• 2021

The number of old buildings older than 30 years in Korea continues to increase from 29.9% in 2005 to 38.8% in 2020. Considering the growing urban regeneration projects, urban maintenance projects, the suppression of urban expansion, and the lack of idle land in the city, the dismantling of old buildings is expected to increase further in the future. As major accidents at building dismantling sites continue to occur, related agencies are also strengthening safety management of building dismantling works. While physical safety management such as collapse and fall is strengthened, there is a relative lack of interest in the health of workers at dismantling sites due to environmental hazards. Since relevant laws stipulate that construction waste should be separated and discharged, old buildings need to be considered for environmental hazards such as fine dust, floating bacteria, and floating molds when dismantling. In this study, we intend to find important safety management elements in the management of building dismantling sites, measure environmental factors harmful to dismantling workers, and present basic data for the management of dismantling sites in the future. "Safety management" was the highest priority, followed by "dust," "vibration," "noise," "bacteria," and "smell." The perception of the importance of "physical damage prevention" with workers working on dismantling and managers managing the site came out similar, but the perception of "work efficiency" and "health disorder prevention" through environmental hazard management showed different priorities. In the process of dismantling, floating bacteria and floating mold were collected, cultured, and measured the concentration in the indoor air. The measurement was measured by dividing it into pre-dismantling and during dismantling.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.5
• /
• pp.151-160
• /
• 2022

Owing to the recent increase in the frequency of explosion accidents, blast resistive design has garnered attention to reduce the damage of important structural elements. However, domestic research on the blast resistive structures is still insufficient, and domestic design guideline against blast loads are not documented yet. In this study, a numerical study on the RC blast resistive walls, where the test variable was the presence of FRP sheet, was performed using LS-DYNA program. Based on the numerical results, displacement-time hysteretic curve, pressure-impulse diagram, and fragility curve of the test specimens were derived. It was shown that the FRP sheet strengthening method is efficient to improve the blast resistive performance of the RC wall. Also, the strengthening effect of FRP sheet on the RC wall was stronger when the magnitude of the blast load was greater.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.32 no.1
• /
• pp.25-38
• /
• 2022

With the diversification of payment methods and games, related financial accidents are causing serious problems for users and game companies. Recently, game companies have introduced an Fraud Detection System (FDS) for game payment systems to prevent financial incident. However, FDS is ineffective and cannot provide major evidence based on judgment results, as it requires constant change of detection patterns. In this paper, we analyze abnormal transactions among payment log data of real game companies to generate related features. One of the unsupervised learning models, Autoencoder, was used to build a model to detect abnormal transactions, which resulted in over 85% accuracy. Using X-FDS (Explainable FDS) with XAI-SHAP, we could understand that the variables with the highest explanation for anomaly detection were the amount of transaction, transaction medium, and the age of users. Based on X-FDS, we derive an improved detection model with an accuracy of 94% was finally derived by fine-tuning the importance of features that adversely affect the proposed model.

• Journal of Korean Society of Water and Wastewater
• /
• v.36 no.5
• /
• pp.261-273
• /
• 2022

In this study, we collect water control valves that have had accidents due to existing cracks, etc. are collected, and propose investigation items for strengthening the valve structural safety evaluation through a series of analyzes from valve specifications to physicochemical properties are proposed. The results of this study are as follows. First, there was a large variation in the thickness of the body or flange of the valves to be investigated, which is considered to be very important factor, because it may affect the safety of the valve body against internal pressure and the flange connected with the bolt nut. Second, 60% of the valves under investigation had many voids in the valve body and flange, etc. and the decrease in thickness due to corrosion was relatively large on the inner surface in contact with water rather than the outer surface. It is judged that the investigation of depth included voids is very important factor. Third, all valves to be investigated are made of gray cast iron foam, and therefore it is judged that there is no major problem in chemical composition. It is judged that the chemical composition should be investigated. Fourth, as a physical investigation item, the analysis of metal morphology structure seems to be a very important factor for nodular cast iron from rather than a gray cast iron foam water valve with a flake structure. As it was found to be 46.7~68.8% of the standard recommended by KS, it could have a direct effect on damage such as cracks, and therefore it is judged that the evaluation of tensile strength is very important in evaluating the safety of the valve.

• Geomechanics and Engineering
• /
• v.30 no.2
• /
• pp.139-151
• /
• 2022

The mechanical properties of expansive soil are very unstable, highly sensitive to water, and thus easy to cause major engineering accidents. In this paper, the expansive soil foundation pit project of the East Huada Square in the eastern suburb of Chengdu was studied, the moisture content of the expansive soil was considered as an important factor that affecting the mechanics properties of expansive soil and the stability of the non-equal-length double-row piles in the foundation pit support. Three groups of direct shear tests were carried out and the quantitative relationships between the moisture content and shear strength τ, cohesion c, internal friction angle φ were obtained. The effect of cohesion and internal friction angle on the maximum displacement and the maximum bending moment of piles were analyzed by the finite element software MIDAS/GTS (Geotechnical and Tunnel Analysis System). Results show that the higher the moisture content, the smaller the matrix suction, and the smaller the shear strength; the cohesion and the internal friction angle are exponentially related to the moisture content, and both are negatively correlated. The maximum displacement and the maximum bending moment of the non-equal length double-row piles decrease with the increase of the cohesion and the internal friction angle. When the cohesion is greater than 33 kPa or the internal friction angle is greater than 25.5°, the maximum displacement and maximum bending moment of the piles are relatively small, however, once crossing the points (the corresponding moisture content value is 24.4%), the maximum displacement and the maximum bending moment will increase significantly. Therefore, in order to ensure the stability and safety of the foundation pit support structure of the East Huada Square, the moisture content of the expansive soil should not exceed 24.4%.

• Journal of Korean Society of Disaster and Security
• /
• v.15 no.2
• /
• pp.1-12
• /
• 2022

Based on major safety-related statistics of cities, provinces, counties, and districts across the country, social disasters manage regional safety index ratings in six areas(traffic accidents, fires, crime, life safety, suicide, and infectious diseases), and natural disasters operate a management system. The current application of the regional safety assessment of natural disasters is very insufficient to evaluate the local risk of natural disasters up to the Eup, Myeon, and Dong level, and it is marked too engineering and difficult for the general public to use. The purpose of this study is to present Korea's natural disaster local risk assessment as an improvement model that extends to the sub-unit of Eup, Myeon, and Dong, using the local risk assessment model mixed with natural and social disasters.

• Journal of the Society of Disaster Information
• /
• v.18 no.4
• /
• pp.786-794
• /
• 2022

In construction sites, effective preventive safety management is required beyond post-processing safety management. Purpose: The purpose of this study is to present a model and analyze the relationship between safety management activities, safety culture key elements, safety, unsafe behavior management, and safety for autonomous and preventive safety management. Method: The relationship was analyzed by applying the survey data to the structural equation, and the path to safety outcomes from exogenous variables was explored and major issues were presented by interpreting the part suggested by the hypothesis verified by the analysis results. Result: As a result of analyzing the preliminary model and the path model, the appropriate model fit was confirmed, and the significant effect of exogenous variables on endogenous variables was confirmed. Conclusion: It is judged that it can contribute to continuously improving safety performance before safety accidents occur through safety management activities, safety and unsafe behavior management, and management of key elements of safety culture.

• Journal of Advanced Navigation Technology
• /
• v.27 no.3
• /
• pp.293-299
• /
• 2023

UPRT(Upset Prevention And Recovery Training) is an accident prevention training program developed over a three-year period after the main cause of aircraft accidents in commercial aviation between 2001 and 2011 was analyzed as LOC-I(Loss Of Control Flight). In 2014, ICAO presented UPRT for fixed-wing aircraft through Doc.10011(Manual On Aeroplane Upset Prevention And Recovery Training) and recommended mandatory implementation to Contracting States from March 2019. Since naval P-3C is a major mission of maritime patrol and anti-submarine warfare, it takes a lot of time to fly at low altitude (70-600 m), and the majority of P-3C pilots have experienced spatial disorientation, so Upset prevention and recovery training is essential for naval P-3C pilots. To this end, this study intends to present measures for UPRT from limited conditions using the P-3C simulator owned by the Navy.

• Korean journal of aerospace and environmental medicine
• /
• v.29 no.2
• /
• pp.67-71
• /
• 2019

The health of licence holders (flight crew members and air traffic controllers) is recognized as an important element of aviation safety. The medical emergency symptoms that occur during the flight duty period without prior notice can interfere with human performance capabilities and threaten aviation safety. To prevent this, ICAO has been required to conduct a periodic medical assessment process of licence holders including routine analysis of in-flight incapacitation events and medical findings during medical to identify areas of increased medical risk and continuous reevaluation of the medical assessment process to concentrate on identified areas of increased medical risk. The supply and demand of licence holders have become a major issue due to the increase in air traffic around the world, and the pilot retirement age has been extended to 65 years. But, there is no significant change in the aviation medical assessments process. The follow up of the result of medical examination discovered through aviation medical examination is a very important part, but it has not been properly implemented, and the sick leaves and medical inflight incapacitation reporting system should be improved. The management of health risk factors for licence holders must be implemented to prevent aircraft accidents or aviation safety problems caused by health problems. In this paper, we propose the development plan and concrete improvement plan of the health risk management system of licence holders in Korea in terms of aviation safety.