• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.5
• /
• pp.577-585
• /
• 2023

Lateral torsional buckling causessafety accidentssuch as collapse accidents during erection. Therefore, anaccurate safety designshould be conducted. Lateral torsional buckling canbe prevented by reinforcing the end orreducing the unbraced length. The method ofreducing the unbraced length by installing a crossframe has high material and installation costs and low maintenance performance.In addition, structuralsafety may be deteriorated due to cracks. The end reinforcement method using Concrete Filled Half Pipe Stiffeneris a method ofreinforcing the end of a plate girder using a stiffenerin the form of a semi-circular column. This method increasesthewarping strength ofthe girder and increasesthe lateral torsional buckling strength.In thisstudy, the effect ofincreasing the warping strengthof plate girders with concrete filled half pipe stiffeners was confirmed. To verify the effect, the results ofthe designequationand the finite element analysis were compared and verified through a experiment. As a result, the plate girderwithCFHPS increased thewarping strengthand confirmed that the lateral torsional buckling strength was increased.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.2
• /
• pp.153-164
• /
• 2023

The objective of this study is to examine the removal rate of air pollutants, specifically sulfur oxides (SO_x) and nitrogen oxides(NO_x), using concrete permeable blocks containing zeolite beads coated with materials capable of eliminating these pollutants. Titanium dioxide(TiO₂) powder and coconut shell powder were utilized for the removal of SO_x and NO_x and were applied as coatings on the zeolite beads. Concrete permeable block specimens embedded with the coated zeolite beads were produced using an actual factory production line. Test results demonstrated that the concrete permeable block containing zeolite beads coated with coconut shell powder in the surface layer achieved SO_x and NO_x removal rates of 12.5% and 99%, respectively, exhibiting superior performance compared to other blocks. Additionally, the flexural strength and slip resistance were 5.3MPa and 65BPN or higher, respectively, satisfying the requirements specified in KS F 4419 and KS F 4561. Conversely, the permeability coefficient exhibited low permeability, with grades 2 and 3 before and after contaminant pollution, according to the standard for 'design, construction, and maintenance of pavement using permeable block'. In conclusion, incorporating zeolite beads coated with coconut shell powder in the surface layer enables simultaneous removal of SO_x and NO_x, irrespective of ultraviolet rays, while maintaining adequate flexural strength and slip resistance. However, the permeability is significantly reduced, necessitating further improvements.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.8
• /
• pp.145-152
• /
• 2009

Manufacturer's competitiveness in the MRO industry, which is to stimulate the growth of the business-to-business e-commerce market, has recently become more important. A nuclear parts manufacturer was supplying products based on irregular demand from clients which differs from ordinary MRO business practices. The reason for this is the Nuclear Parts Manufacturer has fallen behind the e-commerce performance of other industries, and they lack global competitiveness due to the low efficiency of the individual companies within it. In this study, we developed an MRO based a-Marketplace system to minimize repetitive ordering of raw materials, lack of reusability and inefficiency of transaction processing which was a result of the former legacy business practice, In order to accomplish the purpose of this study, we implemented a web based automated CR system which considered the characteristics of the nuclear parts manufacturing: the system has sub modules such as ordering, product management, transaction management, warehousing and raw material handling. As a consequence of the system implementation, H corporate successfully automated ordering of raw materials, quotation processing and inventory management compared to the legacy business process, achieving increased efficiency by reducing wasteful resources.

• Journal of the Korean Society for information Management
• /
• v.39 no.4
• /
• pp.269-306
• /
• 2022

This study aimed to develop indicators that can measure the digital transformation performance of science and technology information construction and sharing systems by utilizing the Digital Curation Maturity Models. For digital transformation, it is necessary to consider not only simple service improvement but also organizational and business changes. In this study, we aimed to develop a model for measuring the digital transformation of KISTI, Korea's representative science and technology information service organization. KISTI has already carried out BPR work for digital transformation and borrowed the concept of a maturity model. However, in BPR, there is no method to measure the result. Therefore, in this paper, we developed an index to measure digital transformation based on the maturity model. Indicator development was carried out in two ways: model development and evaluation. Cases for model construction were made through a comprehensive review of existing KISTI and various domestic and foreign cases. The models before verification were technology (37), data (45), strategy (18), organization (36), and (social)influence (14) based on the major categories. After verification using confirmatory factor analysis, the model is classified as technology (20 / 17 indicators dropped), data (36 / 9 indicators dropped), strategy (18 / maintenance), organization(30 / 6 indicators dropped), and (social) influence (13 indicators / 1 indicator dropped).

• Journal of Navigation and Port Research
• /
• v.47 no.3
• /
• pp.120-127
• /
• 2023

Maritime pilots are always exposed to unpredictable risks present in the marine environment because they are boarding ships through pilot ladders or accommodation ladders at sea. Since the pilot plays an important role in securing the safety of a ship entering or departing from a port, an injury to the pilot substantially affects the overall safety of the ship. The purpose of this study is to analyze pilot injuries and predict accidents. For this purpose, pilot injury cases are analyzed and potential situations are identified through a survey. Pilot injuries are also predicted. The survey was analyzed using the IPA (Importance-Performance Analysis) methodology, and the binomial distribution and Poisson distribution were used to predict injury trends. As a result of the study, 316.8 nearmiss occurred per pilot injury, and if the current accident management system is maintained, the probability of pilot injury occurring within 3 months is 64.4%. Based on the research results, the need for a management system to prevent pilot injuries and reinforcement of maintenance and installation for pilot ladders was suggested.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.10
• /
• pp.1-8
• /
• 2023

If there is a defect in the wheel bearing, which is a major part of the car, it can cause problems such as traffic accidents. In order to solve this problem, big data is collected and monitoring is conducted to provide early information on the presence or absence of wheel bearing failure and type of failure through predictive diagnosis and management technology. System development is needed. In this paper, to implement such an intelligent wheel hub bearing maintenance system, we develop an embedded system equipped with sensors for monitoring reliability and soundness and algorithms for predictive diagnosis. The algorithm used acquires vibration signals from acceleration sensors installed in wheel bearings and can predict and diagnose failures through big data technology through signal processing techniques, fault frequency analysis, and health characteristic parameter definition. The implemented algorithm applies a stable signal extraction algorithm that can minimize vibration frequency components and maximize vibration components occurring in wheel bearings. In noise removal using a filter, an artificial intelligence-based soundness extraction algorithm is applied, and FFT is applied. The fault frequency was analyzed and the fault was diagnosed by extracting fault characteristic factors. The performance target of this system was over 12,800 ODR, and the target was met through test results.

• Journal of the Korean Geosynthetics Society
• /
• v.23 no.2
• /
• pp.43-52
• /
• 2024

Recent abnormal climate conditions have increased the risk of slope collapses, which frequently result in significant loss of life and property due to the absence of early prediction and warning dissemination. In this paper, we develop a slope condition analysis system using IoT sensors and AI-based camera to assess the condition of slopes. To develop the system, we conducted hardware and firmware design for measurement sensors considering the ground conditions of slopes, designed AI-based image analysis algorithms, and developed prediction and warning solutions and systems. We aimed to minimize errors in sensor data through the integration of IoT sensor data and AI camera image analysis, ultimately enhancing the reliability of the data. Additionally, we evaluated the accuracy (reliability) by applying it to actual slopes. As a result, sensor measurement errors were maintained within 0.1°, and the data transmission rate exceeded 95%. Moreover, the AI-based image analysis system demonstrated nighttime partial recognition rates of over 99%, indicating excellent performance even in low-light conditions. Through this research, it is anticipated that the analysis of slope conditions and smart maintenance management in various fields of Social Overhead Capital (SOC) facilities can be applied.

• Journal of Korea Water Resources Association
• /
• v.57 no.1
• /
• pp.59-72
• /
• 2024

Agricultural reservoirs supply water for various purposes such as irrigation, maintenance, and living. Since agricultural reservoirs respond sensitively to seasonal and climate changes, it is essential to estimate supply and inflow for efficient operation, and water management should be done based on these data. However, in the case of agricultural reservoirs, the measurement of supply and inflow is relatively insufficient compared to multi-purpose dams, and inflow-supply analysis in agricultural reservoirs through water balance analysis is necessary for efficient water management. Therefore, rainfall-runoff analysis models such as ONE model and Tank model have been developed and used for reservoir water balance analysis, but the applicability analysis for ungauged watersheds is insufficient. The ONE model is designed for daily runoff calculation, and the model has one parameter, which is advantageous for calibration and ungauged watershed analysis. In this study, the water balance was analyzed through the ONE model and the Tank model for 15 watersheds upstream of dams, and R² and NSE were used to quantitatively compare the performance of the two models. The simulation results show that the ONE model is suitable for predicting the inflow of agricultural reservoirs with the ungauged watershed

• Korean Journal of Clinical Laboratory Science
• /
• v.55 no.4
• /
• pp.253-260
• /
• 2023

The germanium-68/gallium-68 (⁶⁸Ge/⁶⁸Ga) generator has high spatial utilization and requires little maintenance, making it economical and easy to produce. Thus, the frequency of use of ⁶⁸Ga radiopharmaceuticals is rapidly increasing worldwide. Therefore, this study attempted to develop an automated synthesizer for the routine clinical application of ⁶⁸Ga radiopharmaceuticals. The automated synthesizer was based on a fixed tubing system and the structure was designed after adjusting the position of the parts to reflect the synthesis method. Using various components that can be supplied in Korea, the automated synthesizer was manufactured at a much lower price cost than that of a commercialized automated synthesizer sold by companies. ⁶⁸Ga-DOTA-[Tyr3]-octreotide (⁶⁸Ga-DOTATOC) was synthesized to evaluate the performance of the automated synthesizer. ⁶⁸Ga-DOTATOC could be synthesized with about 65% of non-decay corrected yield, and the synthesized ⁶⁸Ga-DOTATOC met all quality control standards. We have synthesized ⁶⁸Ga-DOTATOC more than 100 times, and only faced a few problems caused by mechanical errors. In this study, we successfully developed a simple automated synthesizer for ⁶⁸Ga radiopharmaceuticals with high reproducibility. As various ⁶⁸Ga radiopharmaceuticals have recently been developed, it is expected that the automated synthesizer developed in this study will be useful for routine clinical use.

• Journal of Korean Society for Quality Management
• /
• v.51 no.4
• /
• pp.531-550
• /
• 2023

Purpose: The unique nature of life-and-death healthcare services sets them apart from other service industries. While many studies exist on the relationship between healthcare services and customer satisfaction, most of them focus on mildly ill patients, ignoring the differences between critically ill and non-seriously ill patients. This study discusses the actual quality of healthcare services for patients who are facing life-threatening illnesses and are on life support, as well as their right to protection and dignity. Methods: The survey conducted to 149 patients with the four major illnesses: cancer, heart disease, brain disease and rare and incurable disease, those who have experiences with senior general hospitals. Results: The basic statistics of this study are adequate to represent the four major critical illnesses, and the reliability and validity of this study's hypotheses, which were measured by multiple items, were analyzed, and the internal consistency was judged to be high. In addition, it was found that the convergent validity was good and the discriminant validity was also secured. When examining the goodness of fit of the hypotheses, the SRMR, which is the standardized root mean square of residuals that measures the difference between the covariance matrix of the data variables and the theoretical covariance matrix structure of the model, met the optimal criteria. Conclusion: The academic implications of this study are differentiated from other studies by moving away from evaluating the quality of healthcare services for mildly ill patients and focusing on the rights and dignity of patients with life-threatening illnesses in four senior general hospitals. In terms of academic implications, this study enriches the depth of related studies by demonstrating the right to protection and dignity as a factor of patient-centeredness based on physical environment quality, interaction quality, and outcome quality, which are presented as sub-factors of healthcare quality. We found that the three quality factors classified by Brady and Cronin (2001) are optimized for healthcare quality assessment and management, and that the results of patients' interaction quality assessment can be used to provide a comprehensive quality rating for hospitals. Health and human rights are inextricably linked, so assessing the degree to which rights and dignity are protected can be a superior and more comprehensive measurement tool than traditional health level measures for healthcare organizations. Practical implications: Improving the quality of the physical environment and the quality of outcomes is an important challenge for hospital managers who attract patients with life and death conditions, but given the scale and economics of time, money, and human inputs, improving the quality of interactions and defining them as performance indicators in hospital quality management is an efficient way to create maximum value in the short term.