• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.4
• /
• pp.68-80
• /
• 2019

This study is to provide basic data for the user-oriented design for a middle school meditation forest in the future by analyzing the physical environment characteristics of existing middle school meditation forests, the users' utilization behavior, and the degree of the importance satisfaction. For this purpose, 24 evaluation indices based on site characteristics, naturalness, functionality, and the effectiveness of meditation forest sites were selected for analysis of importance satisfaction. We surveyed and analyzed the students and teachers of two middle schools 'A' and 'B' in Gwangju Metropolitan City. The results of this study are as follows. First, the perception and utilization rates of the meditation forests by students was significantly lower than teachers at both schools. 'A' school has a better use and recognition rate than the 'B' school. Second, the purposes of using meditation forests were rest (49.6%), weekday lunchtime (63.6%), with friends (65.0%) or colleagues (60%), and short (less than 10 minutes) rests (68.6%). They preferred flowers (30.0%) and shading plants (28.9%), mainly using shelters (57.9%) and walking trails (37.1%). Third, as a result of the importance of satisfaction analysis, the average score of the 24 items importance (3.81), higher than the satisfaction (3.62). The 24 items positioned in 4 quadrants are as follows: Nine items are in the I quadrant for 'persistent maintenance'. Three items are in the II quadrant for 'priority correction'. Seven items are in the quadrant III for 'low priority in the management and operation'. Five items are in the quadrant IV for 'avoid over effort'. For the comparison of two middle schools' satisfaction, 'A' school satisfaction was higher than 'B' school for 16 items, which showed a statistically significant difference. It is believed that the users in 'A' school are more satisfied than 'B' school because it has more forests and trails, better accessibility, and a variety of plant types and planting areas in the A school meditation forest. The results of the overall satisfaction analysis showed a significant difference between 'A' school (68.0%) and 'B' school (47.2%) as 'A' school has better shelters and trails. The rankings of the most satisfying space are walking trails (1st place) and shelters (2nd place). The reason for the highest satisfaction was for rest (stress relief and emotional support) in both 'A' and 'B' schools.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.3
• /
• pp.1-11
• /
• 2019

The purpose of this study is to propose a sustainable village-unit urban regeneration plan for the Ewha Mural Village, where mural artists recovered concrete fences to be followed by some residents damaging the mural paintings. Through a review of the existing literature and a preliminary survey, we derived the urban regeneration factors (environmental sustainability, economic sustainability, and social sustainability) applicable at the village level. After an empirical survey on the residents, we tried to identify various problems of the Ewha Mural Village. Residents selected the factors of accessibility, parking management, diversity of industries, creation of new jobs, community participation of residents for the mural village's activation, and stable living spaces. In the case of Ewha Mural Village, physical environment factors for the residents at the time of construction were not considered and the village was mainly planned using budget-based murals. Since then, the inequality of economic benefits intensified the conflicts among the residents. In addition, public benefits, such as establishing new industries and employing outsiders, were not provided, and these facts appear to have led to an unsustainable murals village, in which the murals that are the protagonists of the village revitalization are being destroyed. Therefore, the urban regeneration of Ewha Mural Village should be designed considering a region where some residential areas can be transformed into tourist areas. In addition, it is essential to employ a win-win method to improve the living environment, such as road maintenance, not only partial economic benefits, such as increased land-value, and to increase resident's value as a common asset within the village itself.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.5
• /
• pp.41-48
• /
• 2019

Our daily lives are changing at a rapid pace and the concept of smart city is spreading, as the information communication technologies apply to various fields. However, efforts to prepare for changes in society due to technological evolution are insufficient in the field of landscape architecture. The purposes of this study are to explore the concept of smart parks, to investigate how smart technology has been applied to parks, and to identify the users' perception and satisfaction on smart park services. To this end, we conducted literature review, focus group interviews with experts, and a questionnaire survey with 180 users of the IoT See pilot smart park in Daegu. Smart parks can, as a result, be defined as sustainable parks that improve users' experience in parks and solve social and environmental problems faced by utilizing various high technology. Smart technologies introduced at the park so far have been mostly focused on safety and environmental areas, including AI CCTV, smart street lamp, and fine dust warning devices. The results of survey showed that not many users were aware of the smart services the park provided due to the lack of public communication as well as the nature of maintenance-oriented smart services. The survey also found that AR services for the education of historic parks were the least utilized, while solar power benches and WiFi service were most preferred by the park users. In conclusion, smart technologies need to be integrated with diverse park contents more centered user needs, providing services to enhance safety and environmental management in order to develop user-oriented smart parks.

• Korean Journal of Environment and Ecology
• /
• v.35 no.2
• /
• pp.135-153
• /
• 2021

The demilitarized zone (DMZ) is a border barrier with 248 kilometers in length and about 4 kilometers in width crossing east to west to divide the Korean Peninsula about in half. The boundary at 2 kilometers to the south is called the southern limit line. The DMZ has formed a unique ecosystem through a natural ecological succession after the Armistice Agreement and has high conservation value. However, the use of facilities for the military operation and the unchecked weeding often damage the areas in the vicinities of the southern limit line's iron-railing. This study aimed to prepare basic data for the restoration of damaged barren vegetation. As a result of classifying vegetation communities based on indicator species, 10 communities were identified as follows: Duchesnea indica Community, Hosta longipes Community, Sedum kamtschaticum-Sedum sarmentosum Community, Potentilla anemonefolia Community, Potentilla fragarioides var. major Community, Prunella vulgaris var. lilacina Community, Dendranthema zawadskii var. latilobum-Carex lanceolata Community, Dendranthema zawadskii Community, Plantago asiatica-Trifolium repens Community, and Ixeris stolonifera-Kummerowia striata Community. Highly adaptable species can characterize vegetation in barren areas to environment disturbances because artificial disturbances such as soil erosion, soil compaction, topography change, and forest fires caused by military activities frequently occur in the barren areas within the southern limit line. Most of the dominant species in the communities are composed of plants that are commonly found in the roads, roadsides, bare soil, damaged areas, and grasslands throughout South Korea. Currently, the vegetation in barren areas in the vicinities of the DMZ is in the early ecological succession form that develops from bare soil to herbaceous vegetation. Since dominant species distributed in barren land can grow naturally without special maintenance and management, the data can be useful for future restoration material development or species selection.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.78-99
• /
• 2020

The Buddha triad and 16 Arhat statues carved on the rock surface at Seongbulsa temple is the only domestic remaining example of all 16 Arhats, so its academic value is very high. However, it is severely damaged and so required a stability evaluation through study of digital documentation and precise diagnosis for the purpose of comprehensive conservation. This process established that the Buddha statues were of similar scale, while the Arhats showed a wide variety of sizes, and the two kith and kin in the volume were larger than the Arhats. It was estimated that the statues of food for Buddha are similar to the Arhat statues, and most of the statues are well-formed. The rock used to carve the Buddha statues is banded gneiss with distinct foliation, alternating between white bands of quartz and feldspar and black bands composed of biotite. The Buddha statues have been damaged by physical weathering, discoloration, and biological contamination. In damage evaluations, joint (3.6 crack index), peeling (5.2%), exfoliation (1.7%), and falling off (0.1%) were observed on the rock surface of the Buddha statues. In particular, due to severe biological weathering, stage 9 and 10 biological coverage of the rock surface accounted for 57.5% of the total area, and stages 5 to 8 also accounted for a high share at 22.3%. The discoloration factors were shown to be dark brown and white with Fe, Ca, and S, and a large amount of C detected in the blackened contaminants, and the damage weight high in all areas. Discontinuities in different directions were identified in the rock surface. Analysis of potential rock failure types indicated that there is a possibility of plane and toppling failure, but wedge failure is unlikely to occur. The mean ultrasonic velocity of the main rock surface was 2,463m/sec, the lower part of the left side with a large number of joints was relatively low, and the highly weathered (HW) type to the completely weathered (CW) type concentrated distribution, showing weak properties. For the Buddha statues, conservation treatment is required for about 14.9% of micro cracks and 58.9% of exfoliation cracks. In addition, in order to improve the conservation environment of the Buddha statues, maintenance of drainage and ground preparations for the rock surface gradient and plants are necessary, and protection facilities should be reviewed for long-term conservation and management purposes.

• Journal of Food Hygiene and Safety
• /
• v.37 no.6
• /
• pp.400-410
• /
• 2022

This study was performed to analyze the microbial contamination levels of three non-heated rice cake manufacturers in terms of seasonal manufacturing process and to investigate the effects of summertime soaking on contamination levels and temperature-controlled soaking in water on reduction in microbial levels. The total aerobic bacteria (TAB) ranged from 2.69 log CFU/g to 5.08 log CFU/g in the produce, but the microbial contamination increased sharply during soaking. The levels of TAB and coliforms during summer soaking were 7.01 and 3.96 log CFU/g, respectively, and this was significantly higher than those in other seasons. The contamination level was high in the subsequent freezing, with the TAB level (6.24 log CFU/g) exceeding the legal standard. The temperature of soaking water in summer increased from 19.1℃ to 26.8℃ after 12 h of soaking. The microbial contamination was significantly high commensurate with increased soaking time, and the TAB level in the frozen process exceeded the legal standard from 9 h of soaking. The use of ice packs to prevent the increase in temperature of the soaking water in summer resulted in maintenance of temperature at 20.1℃ for up to 12 h. The average TAB value in the freezing process was 4.42 log CFU/g after 12 h of soaking, and this is 1.77 log CFU/g lower than that before. Based on these results, it was determined that controlling the soaking time and water temperature are essential for the production of a safe unheated frozen rice cake. The safety of the HACCP system could be established by applying these preventive management standards.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.7
• /
• pp.5-24
• /
• 2022

The current performance evaluation of slope anchors qualitatively determines the physical bonding between the anchor head and ground as well as cracks or breakage of the anchor head. However, such performance evaluation does not measure these primary factors quantitatively. Therefore, the time-dependent management of the anchors is almost impossible. This study is an evaluation of the 3D numerical model by SfM which combines UAS images with terrestrial LiDAR to collect numerical data on the damage factors. It also utilizes the data for the quantitative maintenance of the anchor system once it is installed on slopes. The UAS 3D model, which often shows relatively low precision in the z-coordinate for vertical objects such as slopes, is combined with terrestrial LiDAR scan data to improve the accuracy of the z-coordinate measurement. After validating the system, a field test is conducted with ten anchors installed on a slope with arbitrarily damaged heads. The damages (such as cracks, breakages, and rotational displacements) are detected and numerically evaluated through the orthogonal projection of the measurement system. The results show that the introduced system at the resolution of 8K can detect cracks less than 0.3 mm in any aperture with an error range of 0.05 mm. Also, the system can successfully detect the volume of the damaged part, showing that the maximum damage area of the anchor head was within 3% of the original design guideline. Originally, the ground adhesion to the anchor head, where the z-coordinate is highly relevant, was almost impossible to measure with the UAS 3D numerical model alone because of its blind spots. However, by applying the combined system, elevation differences between the anchor bottom and the irregular ground surface was identified so that the average value at 20 various locations was calculated for the ground adhesion. Additionally, rotation angle and displacement of the anchor head less than 1" were detected. From the observations, the validity of the 3D numerical model can obtain quantitative data on anchor damage. Such data collection can potentially create a database that could be used as a fundamental resource for quantitative anchor damage evaluation in the future.

• Journal of Ginseng Culture
• /
• v.5
• /
• pp.32-51
• /
• 2023

Because red ginseng was exported in large quantities to the Qing Dynasty in the 19th century, a large-scale ginseng cultivation complex was established in Kaesong. Sibyunje (時邊制), a privately led loan system unique to merchants in Kaesong, made it possible for them to raise the enormous capital required for ginseng cultivation. The imperial family of the Korean Empire promulgated the Posamgyuchik (包蔘規則) in 1895, and this signaled the start of the red ginseng monopoly system. In 1899, when the invasion of ginseng farms by the Japanese became severe, the imperial soldiers were sent to guard the ginseng farms to prevent the theft of ginseng by the Japanese. Furthermore, the stateled compensation mission, Baesanggeum Seongyojedo (賠償金 先交制度), provided 50%-90% of the payment for raw ginseng, which was paid in advance of harvest. In 1895, rising seed prices prompted some merchants to import and sell poor quality seeds from China and Japan. The red ginseng trade order was therefore promulgated in 1920 to prohibit the import of foreign seeds without the government's permission. In 1906-1910, namely, the early period of Japanese colonial rule, ginseng cultivation was halted, and the volume of fresh ginseng stocked as a raw material for red ginseng in 1910 was only 2,771 geun (斤). However, it increased significantly to 10,000 geun between 1915 and 1919 and to 150,000 geun between 1920 and 1934. These increases in the production of fresh ginseng as a raw material for red ginseng were the result of various policies implemented in 1908 with the aim of fostering the ginseng industry, such as prior disclosure of the compensation price for fresh ginseng, loans for cultivation expenditure in new areas, and the payment of incentives to excellent cultivators. Nevertheless, the ultimate goal of Japanese imperialism at the time was not to foster the growth of Korean ginseng farming, but to finance the maintenance of its colonial management using profits from the red ginseng business.

• Journal of Wetlands Research
• /
• v.25 no.2
• /
• pp.75-82
• /
• 2023

Data for measuring the flow rate of streams are used as important basic data for the development and maintenance of water resources, and many experts are conducting research to make more accurate measurements. Especially, in Korea, monsoon rains and heavy rains are concentrated in summer due to the nature of the climate, so floods occur frequently. Therefore, it is necessary to measure the flow rate most accurately during a flood to predict and prevent flooding. Thus, the U.S. Geological Survey (USGS) introduces 1, 2, 3 point method using a flow meter as one way to measure the average flow rate. However, it is difficult to calculate the average flow rate with the existing 1, 2, 3 point method alone.This paper proposes a new 1, 2, 3 point method formula, which is more accurate, utilizing one probabilistic entropy concept. This is considered to be a highly empirical study that can supplement the limitations of existing measurement methods. Data and Flume data were used in the number of holesman to demonstrate the utility of the proposed formula. As a result of the analysis, in the case of Flume Data, the existing USGS 1 point method compared to the measured value was 7.6% on average, 8.6% on the 2 point method, and 8.1% on the 3 point method. In the case of Coleman Data, the 1 point method showed an average error rate of 5%, the 2 point method 5.6% and the 3 point method 5.3%. On the other hand, the proposed formula using the concept of entropy reduced the error rate by about 60% compared to the existing method, with the Flume Data averaging 4.7% for the 1 point method, 5.7% for the 2 point method, and 5.2% for the 3 point method. In addition, Coleman Data showed an average error of 2.5% in the 1 point method, 3.1% in the 2 point method, and 2.8% in the 3 point method, reducing the error rate by about 50% compared to the existing method.This study can calculate the average flow rate more accurately than the existing 1, 2, 3 point method, which can be useful in many ways, including future river disaster management, design and administration.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.25 no.1
• /
• pp.5-13
• /
• 2023

This study was conducted to identify items that should be considered in order to increase user satisfaction in the Jayeonmadang project by analyzing the importance and satisfaction targeting Gochang Jayeonmadang users. As a result of analysis on the importance and satisfaction of Gochang Jayeonmadang users focusing on 20 items in 6 fields, Overall, it was analyzed that they were not satisfied as they were important. In order to increase user satisfaction of Gochang Jayeonmadang, maintenance such as 'cleanliness and hygiene', 'water quality', 'vegetation growth', and 'facility management' should be carefully reflected from the planning and design stage, and careful attention should be paid even after the project. In addition, emphasis should be placed on enhancing the user convenience, such as 'accessibility', 'space layout and utilization efficiency', and 'convenience of route'. And, when promoting the Jayeonmadang project, the purpose of the project should be actively promoted to local residents to raise the residents' awareness of the importance of biodiversity in the city.