• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.713-720
• /
• 2007

Grating is an installed structure on the road for drain. This paper proposes a new product which can prevent the accumulation of earth and sand through the improvement of Grating structure. There were usually harmful insects and bad smell because of accumulated garbage in the frame of previous product. The whole thing of the existing. This study is to separate grating from body. Also body structure consists of frame and box for collecting sewage. Thus, earth and sewage are prevented from accumulating in the drain main hole. The contents of this study is designed safely after structure analysis and vibration shape analysis about new products.

• Korean Journal of Materials Research
• /
• v.9 no.6
• /
• pp.564-568
• /
• 1999

The 8-hydroxyquinoline Zinc(Znq2) were prepared successfully from zinc chloride and zinc acetate as two kinds of starting material. The organic electroluminescent devices(ELDs) were fabricated by the structure of ITO/TPD/Znq2/Al with N-N'-diphenyl-N-N'-bis(3-methylphenyl)-1,1'-biphenyl-4,4'-diamine(TPD) which acts hole trasporting layer and bis(8-oxyquinolino) zinc(II)(Znq2) which acts as emission and electron transporting layer. EL efficiency of Znq2 prepared by heating was investigated. The 570nm of main emission peak which is yellowich green was investigated by photo luminesence(PL) and this results shows that electro luminescence(EL) is from Znq2. The V-J curve shows that carrier injection were investigated from 4V. Maximum luminance and luminance efficiency were 1600cd/$\m^2$, 0.9lm/W. From this results, the Znq2 can be one of the useful organic EL material.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.7
• /
• pp.41-47
• /
• 2021

In this study, the hinges of heavy weight doors were designed and analyzed in line with the trend that built-in appliances are becoming larger and the weight of doors is also increasing. The main specification of the heavy weight door hinge is to allow the deflection at the end of the door to be less than 2 mm when opening and closing, including the automatic closing, slow closing, and closing force control functions. The structural analysis of the design mechanism, component design, and methods for improving the deflection are as follows: 1) Mechanism of the automatic closing function should sense automatically using the spring compression force at a specific angle by the contact between the cam and the cam module roller. 2) Through structural analysis, the maximum stress of the door was found in the link pin hole connected to the pin at each link. 3) Consequently, the pin holder was designed and applied, with little variance, but up to 93% of the specification limit.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.21 no.1
• /
• pp.165-173
• /
• 2023

Various linear system solvers with multi-physics analysis schemes are compared focusing on the near-field region considering thermal-hydraulic-chemical (THC) coupled multi-physics phenomena. APro, developed at KAERI for total system performance assessment (TSPA), performs a finite element analysis with COMSOL, for which the various combinations of linear system solvers and multi-physics analysis schemes should to be compared. The KBS-3 type disposal system proposed by Sweden is set as the target system and the near-field region, which accounts for most of the computational burden is considered. For comparison of numerical analysis methods, the computing time and memory requirement are the main concerns and thus the simulation time is set up to one year. With a single deposition hole problem, PARDISO and GMRES-SSOR are selected as representative direct and iterative solvers respectively. The performance of representative linear system solvers is then examined through a problem with an increasing number of deposition holes and the GMRES-SSOR solver with a segregated scheme shows the best performance with respect to the computing time and memory requirement. The results of the comparative analysis are expected to provide a good guideline to choose better numerical analysis methods for TSPA.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.35-35
• /
• 2023

The main reason for its instability is sediment scouring downstream of hydraulic structures. Both physical and numerical models have been used to investigate the influence of soil properties on scour hole geometry. Nevertheless, no research has been conducted on resistance parameters that affect sedimentation and erosion. In addition, auxiliary structures like wing walls, which are prevalent in many real-world applications, have rarely been studied for their impact on morphology. The hydraulic characteristics of steady flow through a boxed culvert are calibrated using a 3D Computational Fluid Dynamics model compared with experimental data in this study, which shows a good agreement between water depth, velocity, and pressure profiles. Test cases showed that 0.015 m grid cells had the lowest NRMSE and MAE values. It is also possible to quantify sediment scour numerically by testing roughness/d₅₀ ratios (c_s) and diversion walls at a meander flume outlet. According to the findings, c_s = 2.5 indicates a close agreement between numerical and analytical results of maximum scour depth after the culvert; four types of wing walls influence geometrical deformation of the meander flume outlet, resulting in erosion at the concave bank and deposition at the convex bank; two short headwalls are the most appropriate solution for accounting for small changes in morphology. A numerical model can be used to estimate sediment scour at the meander exit channel of hydraulic structures based on the roughness parameter of soil material and headwall type.

• The Bulletin of The Korean Astronomical Society
• /
• v.45 no.1
• /
• pp.30.2-31
• /
• 2020

We present the properties of circumnuclear gas associated with the AGN located in the center of Abell 1644-South. A1644-S is the main cluster in a merging system, which is also known for gas sloshing in its core as seen in X-ray. The X-ray emission of A1644-S shows a rapidly declining profile, indicating the presence of cooling gas flow. This flow of cool gas may fuel the supermassive black hole embedded in the brightest cluster galaxy, leading to the activation of the central AGN. Indeed, we find a parsec-scale bipolar jet feature in the center of A1644-S in our recent KaVA observation, which implies that its central AGN is likely to have been (re)powered quite recently. In order to verify the hypothesis that cooling gas flow in the cluster core can (re)activate the central AGN, we probe the cold gas properties of the central 1 kpc region of A1644-S using the archival VLA and ALMA data. Based on the spatially resolved morphology and kinematics of HI and CO gas, we challenge to identify inflow/outflow gas streams and clumps. We study the role of circumnuclear cool gas in fueling the centrally located cluster AGN in the cool-core environment. We also discuss how the feedback due to the (re)powered AGN affects the surrounding medium.

• Journal of the Korean Professional Engineers Association
• /
• v.2 no.5
• /
• pp.4-18
• /
• 1969

This experiment was conducted, making use of the "NONG-RlM 6", a recommended variety of rice for year of 1968. Main purposes of the experiment are to explore possibilities of: a) ways and means of saving irrigation water and, b) overcoming drought at the same time so that an increased yield in rice could be resulted in. Specifically, it was tried to determine the effects of the circulation irrigation method combined with differentiated thickness of lining upon the growth and yield of rice. Some of the major findings are summarized in the following. 1) The different thicknesses show a significant relationship with the weight of 1,000 grains. In the case of 9cm-lined plot, the grain weight is 23.5 grams, the heaviest. Next in order are 3cm-lined plot, 6cm-lined plot, control plot, and wheat straw lined-plot. 2) In rice yield, it is found that there is a considerably moderate significant relationship with both the different thickness of lining and the number of irrigation, as shown in the table. 3) There is little or no difference among different plots in terms of a) physical and chemical properties of solid, b) quality of irrigation water, c) climatic conditions, and rainfalls. 4) It is found that there is a significant relationship between differences in the method of rotation irrigation and the number of ears per hill. The plot irrigated at an interval of 7 days shows 17.4 ears and the plot irrigated at an interval of 6 days, 16.3. 5) In vinyl-treated plots, it is shown that both yield and component element are greatest in the case of the plot with hole of 3$cm/m^2$. Next in order are; the plot with a hole of 2$cm/m^2$; the plot with a hole of 1$cm/m^2$. In the case of the plot with no hole, it is found that both yield and component elements are decreased as compared to the control plot. 6) The irrigation water requirement is measured for the actual irrigation days of 72 which are the number subtracted the days of rainfall of 30 from the total irrigation days of 102. It is found that the irrigation water requirement for the un control plot is 1,590 mm, as compared to 876 mm (44.9% saved) for the 9cm-lined plot, 959mm(39.7% saved) for the 6cm-lined plot, 1,010mm (36% saved) for the 3cm-lined plot, and 1,082mm (32% saved) for the wheat straw lined plot. In the case of the rotation irrigation method, it is found that the water requirement for the plot irrigated at an interval of 8 days is 538mm (65.3% saved), as compared to 617mm (61.1% saved) for the plot irrigated at an interval of 7 days, 672mm (57.7% saved) for the plot irrigated at an interval of 6 days, 746mm (53.0% saved) for the plot irrigated at an interval of 5 days, 890mm (44.0% saved) for to plot irrigated at an interval of 4 days, and 975mm (38.6% saved) for the plot irrigated at an interval of 3 days. 7) The rate of evapo-transpiration is found 2.8 around the end of the month of July, as compared to 2.6 at the begining of August, 3.4 around the end of August, and 2.6 at the begining of September. 8) It is found that the saturaton quantity of 30 mm per day is decreased to 20mm per day through the use of vinyl covering. 9) The husking rate shows 75 per cent which is considered better.

• Horticultural Science & Technology
• /
• v.32 no.2
• /
• pp.184-192
• /
• 2014

Various types of unit packaging methods were applied for 'Fuji' apples during short-term cold storage and export simulation. Gas tightness of the package was controlled stepwise in the successive two-year experiments using different perforation treatments (none, punch hole, or pinhole) and sealing methods (tie v s. heat seal). Risk of tight packaging and effectiveness of macroperforation on weight loss and quality maintenance were analyzed as related to changes in gas concentration inside the packages. Immediately after harvest, each 5 apple units were packaged in $40{\mu}m$ polypropylene (PP) film bags, stored 4 weeks at $0^{\circ}C$, and then put on the shelf for one week at ambient temperature in the preliminary experiment, In the main experiment, export process was imposed after storage simulating 2 week refrigerated container shipment at $0^{\circ}C$ plus one week local marketing at ambient temperature. Non-perforated film packaging with relatively high gas tightness induced flesh browning caused by carbon dioxide accumulation regardless of the sealing methods. Among perforated film packaging, in contrast, atmospheric modification was partly established only in the pinhole treatment and flesh browning symptom was not observed in all the treatments. Even the punch hole perforated film packaging without gas tightness effectively reduced the weight loss, whereas had slight benefits for quality maintenance. Reduced perforation using pinhole treatment seemed to improve sensory texture, while effects on physicochemical quality were insignificant. Overall results suggest the need of more minute perforation treatments on the packaging film to ensure modified atmosphere effects on quality maintenance.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.523-534
• /
• 2010

A hybrid system of soil-nailing and compression anchor is proposed in this paper; the system is composed of an anchor bar (installed at the tip) with two PC strands and a steel bar. After drilling a hole, installing proposed hybrid systems, and filling the hole with grouting material, prestress is applied to the anchor bar to restrict the deformation at the head and/or to prevent shallow slope failures. However, since the elongation rate of PC strand is much larger than that of steel bar, yield at the steel bar will occur much earlier than the PC strand. It means that the yield load of the hybrid system will be overestimated if we simply add yield loads of the two - anchor bar and PC strands. It might be needed to try to match the yielding time of the two materials by applying the prestress to the anchor bar. It means that the main purpose of applying prestress to the anchor bar should be two-fold: to restrict the deformation at the nail head; and more importantly, to maximize the design load of the hybrid system by utilizing load transfer mechanism that transfers the prestress applied at the tip to the head through anchor bar. In order to study the load transfer mechanism in a systematic way, in-situ pullout tests were performed with the following conditions: soil-nailing only; hybrid system with the variation of prestress stresses from 0kN to 196kN. It was found that the prestress applied to the anchor system will induce the compressive stress to the steel bar; it will result in decrease in the slope of load-displacement curve of the steel bar. Then, the elongation at which the steel bar will reach yield stress might become similar to that of PC strands. By taking advantage of prestress to match elongations at yield, the pullout design load of the hybrid system can be increased up to twice that of the soil-nailing system.

• Journal of the Korean Chemical Society
• /
• v.28 no.3
• /
• pp.149-154
• /
• 1984

The electrical conductivity of p-type yttrium sesquioxide has been measured as a function of temperature and of oxygen partial pressure at temperatures from 650 to 1050$^{\circ}C$C and oxygen partial pressures from $1 {\times}10^{-5}\;to\;2{\times}10^{-1}$atm. Plots of log conductivity vs. 1/T at constant oxygen partial pressures are found to be linear with low-and high-temperature dependences of conductivity. The high-temperature dependence of conductivity shows two different defect structures. The plots of log conductivity vs. log $Po_2$ are found to be linear at $Po_2$'s of $10^{-5}\;to\;10^{-1}$ atm. The electrical conductivity dependences on $Po_2$ are found to be ${{\sigma}{\propto}Po_2}^{1/6}$at $850{\sim}950^{\circ}C,\;{{\sigma}{\propto}Po_2}^{3/16}$ at $950{\sim}1050^{\circ}C\;and\;{{\sigma}{\propto}Po_2}^{1/7.5}{\sim}{{\sigma}{\propto}Po_2}^{1/8.3}\;at\;650{\sim}800^{\circ}C$, respectively. The defect structures are$O_i{''}$ at $850{\sim}950^{\circ}C$ and $V_M{'''}$ at $950{\sim}1050^{\circ}C$. The electron hole is main carrier type, however, ionic contribution is found at lower temperature portion.