• Journal of the Korean earth science society
• /
• v.42 no.6
• /
• pp.632-645
• /
• 2021

Satellite sea surface temperature (SST) composites provide important data for numerical forecasting models and for research on global warming and climate change. In this study, six types of representative SST composite database were collected from 2007 to 2018 and the characteristics of spatial structures of SSTs were analyzed in seas around the Korean Peninsula. The SST composite data were compared with time series of in-situ measurements from ocean meteorological buoys of the Korea Meteorological Administration by analyzing the maximum value of the errors and its occurrence time at each buoy station. High differences between the SST data and in-situ measurements were detected in the western coastal stations, in particular Deokjeokdo and Chilbaldo, with a dominant annual or semi-annual cycle. In Pohang buoy, a high SST difference was observed in the summer of 2013, when cold water appeared in the surface layer due to strong upwelling. As a result of spectrum analysis of the time series SST data, daily satellite SSTs showed similar spectral energy from in-situ measurements at periods longer than one month approximately. On the other hand, the difference of spectral energy between the satellite SSTs and in-situ temperature tended to magnify as the temporal frequency increased. This suggests a possibility that satellite SST composite data may not adequately express the temporal variability of SST in the near-coastal area. The fronts from satellite SST images revealed the differences among the SST databases in terms of spatial structure and magnitude of the oceanic fronts. The spatial scale expressed by the SST composite field was investigated through spatial spectral analysis. As a result, the high-resolution SST composite images expressed the spatial structures of mesoscale ocean phenomena better than other low-resolution SST images. Therefore, in order to express the actual mesoscale ocean phenomenon in more detail, it is necessary to develop more advanced techniques for producing the SST composites.

• Journal of Intelligence and Information Systems
• /
• v.28 no.3
• /
• pp.237-258
• /
• 2022

As the global market environment changes, the domestic ICT industry has a growing influence on the world economy. This industry is regarded as an important driving force in the national economy from a technological and social point of view. In particular, small and medium-sized enterprises (SMEs) in the ICT industry are regarded as essential actors of domestic economic development in terms of company diversity, technology development and job creation. However, since it is small compared to large-sized enterprises, it is difficult for SMEs to survive with a differentiated strategy in an incomplete and rapidly changing environment. Therefore, SMEs must make a lot of efforts to improve their own capabilities, and the government needs to provide the desirable help suitable for corporate internal resources so that they can continue to be competitive. This study classifies the types of ICT SMEs participating in government support programs, and analyzes the relationship between resources and performance creation of each type. The data from the "ICT Small and Medium Enterprises Survey" conducted annually by the Ministry of Science and ICT was used. In the first stage, ICT SMEs were clustered based on common factors according to their experiences with government support programs. Three clusters were meaningfully classified, and each cluster was named "active participation type," "initial support type," and "soloist type." As a second step, this study compared the characteristics of each cluster through profiling analysis for each cluster. The third step carried out in this study was to find out the mechanism of R&D performance creation for each cluster through regression analysis. Different factors affected performance creation for each cluster, and the magnitude of the influence was also different. Specifically, for "active participation type", "current manpower", "technology competitiveness", and "R&D investment in the previous year" were found to be important factors in creating R&D performance. "Initial support type" was identified as "whether or not a dedicated R&D organization exists", "R&D investment amount in the previous year", "Ratio of sales to large companies", and "Ratio of vendors supplied to large companies" contributed to the performance. Lastly, in the case of "soloist type", "current workforce" and "future recruitment plan", "technological competitiveness", "R&D investment", "large company sales ratio", and "overseas sales ratio" showed a significant relationship with the performance. This study has practical implications of showing what strategy should be established when supporting SMEs in the future according to the government's participation in the startup program and providing a guide on what kind of support should be provided.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.27 no.4
• /
• pp.194-210
• /
• 2022

The monthly inventory of dissolved inorganic carbon (C_T) and its fluxes were simulated using a box-model for the southeastern Yellow Sea, bordering the northern East China Sea. The monthly C_T data was constructed by combining the observed data representing four seasons with the data adopted from the recent publications. A 2-box-model of the surface and deep layers was used, assuming that the annual C_T inventory was at the steady state and its fluctuations due to the advection in the surface box were negligible. Results of the simulation point out that the monthly C_T inventory variation between the surface and deep box was driven primarily by the mixing flux due to the variation of the mixed layer depth, on the scale of -40~35 mol C m^-2 month^-1. The air to sea CO₂ flux was about 2 mol C m^-2 yr^-1 and was lower than 1/100 of the mixing flux. The biological pump flux estimated magnitude, in the range of 4-5 mol C m^-2 yr^-1, is about half the in situ measurement value reported. The C_T inventory of the water column was maximum in April, when mixing by cooling ceases, and decreases slightly throughout the stratified period. Therefore, the total C_T inventory is larger in the stratified period than that of the mixing period. In order to maintain a steady state, 18 mol C m^-2 yr^-1 (= 216 g C m^-2 yr^-1), the difference between the maximum and minimum monthly CT inventory, should be transported out to the East China Sea. Extrapolating this flux over the entire southern Yellow Sea boundary yields 4 × 10⁹ g C yr^-1. Conceptually this flux is equivalent to the proposed continental shelf pump. Since this flux must go through the vast shelf area of the East China Sea before it joins the open Pacific waters the actual contribution as a continental shelf pump would be significantly lower than reported value. Although errors accompanied the simple box model simulation imposed by the paucity of data and assumptions are considerably large, nevertheless it was possible to constrain the relative contribution among the major fluxes and their range that caused the C_T inventory variations, and was able to suggest recommendations for the future studies.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.5
• /
• pp.746-752
• /
• 2022

Kiribati, a South Pacific island, and its surrounding countries are gradually submerging to rising sea levels. The sea level continues to change according to the degree of thermal expansion of glaciers and seawater that decreases with increase in temperature. Global warming affects both the amount and volume of seawater, thus increasing sea level. Tidal phenomena occur twice a day to the attraction of celestial bodies such as the moon and the sun. The moon changes the angle of orbiting surface with the Earth equator every 18.6 years, and the magnitude of the tidal force changes depending on the distance between the Earth equator and the moon orbital surface. The University of Hawaii Sea Level Center selected Tarawa, Christmas, Kanton of Kiribati,, Lautoka, Suva of Fiji,Funafuti of Tuvalu, Nuk1u'alofa of Tonga, and Port Vila of Vanuatu. When comparing tide levels for each year for 19 years, the focus was on checking the change in sleep to Tide levels, and rising sea levels was the effect of Tide levels. The highest astronomical tides (HAT) and lowest astronomical tides (LAT) were identified as Tarawa 297.0, 50.8 cm, Christmas 123.8, 19.9 cm, Kanton 173.7, 39.9 cm, Lautoka 240.7, 11.3 cm, Funafuti 328.6, 98.4 cm, Nuk1u'alofa 188.8, 15.5 cm, Port Vila 161.5, -0.5cm, respectively. The Sea level rising speed was Tarawa 3.1 mm/year, Christmas -1.0 mm/year, Kanton 1.6 mm/year, Lautoka 3.1 mm/year, Suva 7.4 mm/year, Funafuti 1.4 mm/year, Nuk1u'alofa 4.2 mm/year, and Port Vila -1.2 mm/year, respectively

• The Bulletin of The Korean Astronomical Society
• /
• v.45 no.1
• /
• pp.34.3-34.3
• /
• 2020

Faint z ~ 5 quasars with M1450 ~ -23 mag are known to be the potentially important contributors to the ultraviolet ionizing background in the post-reionization era. However, their number density has not been well determined, making it difficult to assess their role in the early ionization of the intergalactic medium (IGM). In this work, we present the updated results of our z ~ 5 quasar survey using the Infrared Medium-deep Survey (IMS), a near-infrared imaging survey covering an area of 85 square degrees. From our spectroscopic observations with the Gemini Multi-Object Spectrograph (GMOS) on the Gemini-South 8 m Telescope, we discovered eight new quasars at z ~ 5 with -26.1 ≤ M1450 ≤ -23.3. Combining our IMS faint quasars with the brighter Sloan Digital Sky Survey (SDSS) quasars, we derive, for the first time, the z ~ 5 quasar luminosity function (QLF) without any fixed parameters down to the magnitude limit of M1450 = -23 mag. We find that the faint-end slope of the QLF is very flat (-1.2) with a characteristic luminosity of -25.7 mag. The number density of z ~ 5 quasars from the QLF gives lower ionizing emissivity and ionizing photon density than those in previous works. These results imply that quasars are responsible for only 10-20% of the photons required to completely ionize the IGM at z ~ 5, disfavoring the idea that quasars alone could have ionized the IGM at z ~ 5.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.20 no.1
• /
• pp.163-174
• /
• 2018

Rice cultivation is immensely affected by many climatic factors including temperature, precipitation, etc, and imbalanced climatic conditions negatively affect the growth of rice. In this study, we investigated the effects of different agroclimatic zones of Chungnam Province on rice quality and examined the correlations between climatic characteristics and rice yield components. Average temperatures and rainfall were higher in 'Western Sobaek Inland' than those in the 'South Western coastal zone, and precipitation records showed a wide variation among counties due to typhoons during the examined periods. The average accumulative temperature affecting the magnitude of production during reproductive growth periods was higher in "Cheon-An", "Gong-Ju", "Yeon-Gi (Se-Jong)", "Bo-Ryeong", and "Dang-Jin" counties than those in other counties. The plant height was higher in 'Western Sobaek Inland' counties such as "Yeon-Gi(Se-Jong)" and "Cheon-An", and 'Southern Charyeong Plain' counties such as "Cheong-Yang", "Dang-Jin", and "A-San", than those in other counties. The number of tillers during the 40 days after rice transplantation in "Seo-Cheon" and "Bo-Ryeong" counties increased compared to other counties. This result was relevant to the fact that the date of rice transplantation in those counties was 3 to 4 days later than those in other counties of Chung-Nam Province. The average yield (milled rice basis) was the highest in 'Western Sobaek Inland' zone, showing 3,756 kg ha^-1, followed by 'Southern Charyeong Plain' zone showing 3,621kg ha^-1, and was the lowest in 'South Western coastal zone by 3,315kg ha^-1. "Yeon-Gi(Se-Jong)" and "Dang-Jin" counties showed the highest yields of 4,100kg ha^-1. "Seo-San", "Seo-Cheon", and "Tae-An" counties were relatively lower yields of 3,240~3,280kg ha^-1 in comparison of other counties.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.6
• /
• pp.152-161
• /
• 2023

In general, large-capacity hydrogen storage vessels, typically in the form of vertical cylindrical vessels, are constructed using steel materials. These vessels are anchored to foundation slabs that are specially designed to suit the environmental conditions. This anchoring method involves pre-installed anchors on top of the concrete foundation slab. However, it's important to note that such a design can result in concentrated stresses at the anchoring points when external forces, such as seismic events, are at play. This may lead to potential structural damage due to anchor and concrete damage. For this reason, in this study, it selected an vertical hydrogen storage vessel based on site observations and created a 3D finite element model. Artificial seismic motions made following the procedures specified in ICC-ES AC 156, as well as domestic recorded earthquakes with a magnitude greater than 5.0, were applied to analyze the structural behavior and performance of the target structures. Conducting experiments on a structure built to actual scale would be ideal, but due to practical constraints, it proved challenging to execute. Therefore, it opted for an analytical approach to assess the safety of the target structure. Regarding the structural response characteristics, the acceleration induced by seismic motion was observed to amplify by approximately ten times compared to the input seismic motions. Additionally, there was a tendency for a decrease in amplification as the response acceleration was transmitted to the point where the centre of gravity is located. For the vulnerable components, specifically the sub-system (support columns and anchorages), the stress levels were found to satisfy the allowable stress criteria. However, the concrete's tensile strength exhibited only about a 5% margin of safety compared to the allowable stress. This indicates the need for mitigation strategies in addressing these concerns. Based on the research findings presented in this paper, it is anticipated that predictable load information for the design of storage vessels required for future shaking table tests will be provided.

• Journal of Venture Innovation
• /
• v.3 no.2
• /
• pp.41-76
• /
• 2020

This study confirmed factors affecting smart factory technology acceptance through empirical analysis. It is a study on what factors have an important influence on the introduction of the smart factory, which is the core field of the 4th industry. I believe that there is academic and practical significance in the context of insufficient research on technology acceptance in the field of smart factories. This research was conducted based on the Unified Theory of Acceptance and Use of Technology (UTAUT), whose explanatory power has been proven in the study of the acceptance factors of information technology. In addition to the four independent variables of the UTAUT : Performance Expectancy, Effort Expectancy, Social Influence, and Facilitating Conditions, Government Assistance Expectancy, which is expected to be an important factor due to the characteristics of the smart factory, was added to the independent variable. And, in order to confirm the technical factors of smart factory technology acceptance, the Task Technology Fit(TTF) was added to empirically analyze the effect on Behavioral Intention. Trust is added as a parameter because the degree of trust in new technologies is expected to have a very important effect on the acceptance of technologies. Finally, empirical verification was conducted by adding Innovation Resistance to a research variable that plays a role as a moderator, based on previous studies that innovation by new information technology can inevitably cause refusal to users. For empirical analysis, an online questionnaire of random sampling method was conducted for incumbents of domestic small and medium-sized enterprises, and 309 copies of effective responses were used for empirical analysis. Amos 23.0 and Process macro 3.4 were used for statistical analysis. For accurate statistical analysis, the validity of Research Model and Measurement Variable were secured through confirmatory factor analysis. Accurate empirical analysis was conducted through appropriate statistical procedures and correct interpretation for causality verification, mediating effect verification, and moderating effect verification. Performance Expectancy, Social Influence, Government Assistance Expectancy, and Task Technology Fit had a positive (+) effect on smart factory technology acceptance. The magnitude of influence was found in the order of Government Assistance Expectancy(β=.487) > Task Technology Fit(β=.218) > Performance Expectancy(β=.205) > Social Influence(β=.204). Both the Task Characteristics and the Technology Characteristics were confirmed to have a positive (+) effect on Task Technology Fit. It was found that Task Characteristics(β=.559) had a greater effect on Task Technology Fit than Technology Characteristics(β=.328). In the mediating effect verification on Trust, a statistically significant mediating role of Trust was not identified between each of the six independent variables and the intention to introduce a smart factory. Through the verification of the moderating effect of Innovation Resistance, it was found that Innovation Resistance plays a positive (+) moderating role between Government Assistance Expectancy, and technology acceptance intention. In other words, the greater the Innovation Resistance, the greater the influence of the Government Assistance Expectancy on the intention to adopt the smart factory than the case where there is less Innovation Resistance. Based on this, academic and practical implications were presented.

• Journal of Venture Innovation
• /
• v.6 no.3
• /
• pp.43-60
• /
• 2023

Although the importance of starting a business is being emphasized, it is not easy for a start-up to survive. Therefore, it is necessary to come up with a plan to strengthen startup satisfaction and improve the survival rate of startup companies. In this study, we examined the impact of start-up motivation, start-up capabilities, and start-up passion of start-up companies on start-up satisfaction, as well as the moderating effect according to the founding type of general start-up companies and startups. Entrepreneurship motivation was divided into self-actualization motivation and pro-social motivation. Entrepreneurship capabilities were divided into marketing capabilities and experience capabilities. Entrepreneurship passion was divided into harmonious passion and obsessive passion. Empirical analysis was conducted by receiving surveys from 361 managers of general and startup companies within 7 years of founding their businesses online and offline. As a result, self-actualization motivation, pro-social motivation, marketing competency, experiential competency, and harmonious passion had a significant positive (+) effect on startup satisfaction. However, obsessive passion did not have a significant effect. In addition, the magnitude of influence on startup satisfaction appeared in the following order: harmonious passion, marketing competency, self-actualization motivation, pro-social motivation, and experiential competency. The moderating effect according to the type of founding of general start-ups and startups was found in pro-social motivation, experience competency, and passion for harmony. However, there was no significant moderating effect between self-actualization motivation, marketing competency, obsessive passion, and entrepreneurship satisfaction. This study presented academic implications that harmonious passion and marketing capabilities are important factors in improving startup satisfaction. In addition, practical and policy implications were presented, including the need for programs to support the psychological stability of startup business owners, strengthening startup capabilities through experts, and strengthening startup education programs that can foster self-actualization motivation and pro-social motivation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.6
• /
• pp.587-597
• /
• 2023

We evaluated the eutrophication of Saemangeum Lake, which causes abnormal growth of algae, using the Carlson index. Eutrophication characteristics of Saemangeum Lake were analyzed. For the study, water quality surveys were conducted at 7 stations in Saemangeum Lake every month in 2021. The concentration of Chl.a was slightly higher in the Mankyeong water system in winter, and slightly higher in the Dongjin water system in spring and summer, but overall, except for some periods, the concentration was similar to or lower than the lake water quality environmental standard of class 3. COD showed water quality similar to or above the lake quality environmental standard of grade 4 in both the Mankyeong and Dongjin water systems in the summer and Autumn. TOC concentrations were within lake water quality standard 3 at all sites. Total phosphorus concentrations exceeded the lake water quality standard of Class 4 and were higher in January and August after rainfall. In the correlation analysis between water quality factors, the correlation of organic matter, total phosphorus, and total nitrogen to salinity was relatively high. This reflected the water quality characteristics of freshwater, brackish water, and seawater areas due to seawater inflow through the drainage gate and freshwater inflow through upstream rivers. According to the characteristics of eutrophication fluctuations in Saemangeum Lake by trophic state index, the indices of Chl.a, SD, and TN showed water quality in the early stage of eutrophication, while the TP index showed a severe eutrophication state. The magnitude of the eutrophication index among water quality components was TSI(TP) > TSI(TN) > TSI(SD) > TSI(CHL) in all water systems. Quadrant analysis of the deviation of TSI(CHL) from TSI(TP) and TSI(SD) on a two-dimensional plane showed that there was no limiting effect of total phosphorus on algal growth in all water systems. In addition, the factors af ecting light attenuation appeared to be dominated by small particulate matter from outside sources.