• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1267-1269
• /
• 2005

This paper presents the design for improving performance of the high-precision Magnetic levitation system. Motor performance on various design schemes such as thickness and magnetizing patterns of the permanent magnets, pole pitch, length of air gap, turn number of windings, and thickness of the aluminum-core has been investigated in detail by using FEM(Finite Element Method) Simulation-based DOE(Design of Experiments) method is also applied in order to reduce the large number of analysis according to each design variable and consider the effect among variables. The design in all aspects is proposed by an optimization algorithm using regression equation derived from the simulation-based DOE.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.28-30
• /
• 1998

In this paper, voltage source FEA considering hysteresis characteristics for a simple electrical system is presented because most electrical machines is used under the voltage sources. The magnetization dependent hysteresis model is used for this analysis and the magnetic materials considered in this simulation are iron core and semi-hard material. For a sinusoidal voltage sourece, we got acceptible current wave form which is calculated.

• 한국표면공학회지
• /
• 제22권3호
• /
• pp.109-117
• /
• 1989

The effect of heft treatment on the characteristic properties of insulation layer is studied for two kinds of non-oriented silicon steels, which were insulation-coates with various kinds of inorganic and inorganic-organic complex coating solutions. In addition, how the carbon contained in the insulation layer would affect the carbon content and the magnetic properties of the steel substrates is examined. Lower temperature heat treftment ($480^{\circ}C$ for 0.5hr) is found to render morw favorable surface qualities, wheras higher temperature heat treatment ($790^{\circ}C$ for 2hr) better core loss due to grin growt occurred during the heat treatment. Decarburization of the steel substrate is also found unaffectrd by the presence of carbon in the insulation layer.

• Bulletin of the Korean Chemical Society
• /
• 제13권1호
• /
• pp.22-26
• /
• 1992

The solution structures of the vanadium(V) complexes of iminodiacetate analogues, such as iminodiacetate (IDA), methyliminodiacetate (MeIDA), ethyliminodiacetate (EtIDA), benzyliminodiacetate (BzIDA), pyridine-2,6-dicarboxylate (DPA), and 2-hydroxyethyliminodiacetate (HEIDA), have been studied by $^{13}C-$ and $^{51}V$-NMR spectroscopy. Assuming that the complexes have a $cis-VO_2$ core, IDA, MeIDA, EtIDA, and BzIDA act as facial tridentate ligands to form octahedral complexes, whereas DPA coordinates to $VO_2^+$ as a meridional tridentate. And one water molecule fulfills the remaining site to satisfy the coordination number of six. But HEIDA coordinates to $VO_2^+$ through one IDA moiety and one hydroxyl group, acting as a tetradenate.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.833-836
• /
• 1995

A capacitor discharge impulse magnetizer is used to produce a high current pulse of short duration in a magnetizing fixture for magnets of the various shapes. The problem of designing custom fixtures for magnetization has often been considered more of conventional experience than a scientific theory. Therefore, the design of magnetizingfixture has until recently been a "cut and try" process. It was common to literally blow up one or more fixtures beforeachieving the desired results. Finite element CAD package allow the design of such a fixture. Since magnetizing fixtures come in a variety of sizes and shapes, there is usually no simple analysis method that can be used to estimate the field characteristics of the fixtures. Instead, one typically uses finite element analysis. FEA program MAXWELL is the primary tool used here. The purpose of this study was a examine both theoretically and experimentally the field characteristics inside the fixture. Independent of sizes and shapes of magnetizing fixtures, the desired magnetic field can be obtained with resonable predictability. The experimental results have been achieved using a 1000[V], 22.4[KJ] capacitor discharge magnetizer and iron-core fixtures.

• Journal of Magnetics
• /
• 제16권1호
• /
• pp.6-9
• /
• 2011

Spin-motive force has drawn attention because it contains a fundamental physical property. Spin-motive force creates effective electric and magnetic fields in moving magnetization; a vortex is a plausible system for observing the spin-motive force because of the abrupt profile of magnetization. However, the time-averaged value of a spin-motive force becomes zero when a vortex core undergoes gyroscopic motion. By means of micromagnetic simulation, we demonstrates that a non-zero time-averaged electric field induced by spin-motive force under certain conditions. We propose an experimental method of detecting spin-motive force that provides a better understanding of spin transport in ferromagnetic system.

• 한국자기학회지
• /
• 제18권4호
• /
• pp.127-130
• /
• 2008

본 논문에서는 수 백 나노미터 크기의 자성 소자에서 존재하는 강자기 소용돌이 구조의 운동에 대한 이론을 제시한다. LLG 방정식으로부터 유도된 운동방정식, 즉 Thiele 방정식에 그 이후 밝혀진 이론적 결과들을 도입하여 강자기 소용돌이의 감쇠 단조화 운동방정식을 도출하였다. 이러한 운동방정식으로부터 감쇠 단조화 운동의 고유 진동수와 감쇠 상수를 나타내는 수식을 유도하였으며, 유도된 수식을 micromagnetic 시늉 실험을 통하여 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 전력전자학술대회
• /
• pp.473-474
• /
• 2019

무선전력전달 시스템을 위한 코일을 설계함에 있어 코일 및 코어의 치수, 재료 및 형상은 효율과 직관된 요소이므로 가장 적절한 선택이 필요하다. 하지만 높은 효율을 가지는 무선전력전달 시스템을 설계하더라도 실제 이격거리는 가변하므로 예상했던 효율과 다른 결과가 야기된다. 본 연구에서는 기존의 E-E 형상과 C-C 형상 및 제안한 Plat C-C 형상을 페라이트 코어를 바탕으로 x-y-z 이격거리의 변화량에 따른, 결합계수를 유한요소해석 시뮬레이션을 통해 비교 및 분석하고 200W급 하드웨어를 통해 검증한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 전력전자학술대회
• /
• pp.153-155
• /
• 2019

This paper proposes a two-phase interleaved bridgeless single-stage ac-dc converter with magnetic integration that can achieve CCM power factor correction without input current sensing. All switches achieve ZVS turn-on and all diodes achieve ZCS turn-on for the whole grid cycle. SDAB-based modulation strategy is applied which results in simple power control and wide range output voltage. A flux cancellation method to integrate the interleaved transformer is firstly proposed in this paper to reduce the core size and loss. Experimental results on a 1.7-kW, 50kHz prototype are given to verify the principle and advantages of the proposed ac-dc converter.

• Archives of Plastic Surgery
• /
• 제46권3호
• /
• pp.267-271
• /
• 2019

A 70-year-old man complained imbalance while walking, inability to perform ankle flexion, and could not stand on tip-toe 3 months after injury. The ankle looked swollen with loss of Achilles contour and obvious gait disturbance. Magnetic resonance imaging shows a 5-cm Achilles tendon gap. Subsequently, surgery was performed to solve the neglected Achilles tendon rupture. Patient was put under general anesthesia with a regional block. Using a nontourniquet technique, a reconstructive procedure was performed using a half-width autologous Achilles tendon graft, which was attached to the calcaneal prominence with wire in a double strand Bunnell fashion. As for the proximal stump, double core Bunnell/modified Kessler suturing was carried out to suture the graft to Achilles stump. To increase the vascularization, an ipsilateral gastrocnemius fascial flap with a distally based-pedicle was harvested to wrap around the tendon graft. At a 6-month follow-up, the patient was able to stand on tip-toe and had also regained a normal gait.