• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1772-1775
• /
• 2002

In this paper, we propose a Hangul character recognition method in which new letter components as recognition units are introduced and the MLP (multilayer perceptrons) neural networks are employed for two-step recognition of Hangul. To recognize Hangul character, we divide it into two or three recognition units and extract the direction angle features of them to be fed to the corresponding neural network recognizers. The recognition results of neural network recognizers are combined by another neural network. The experiments were conducted on the Hangul characters from real letter envelopes which are collected in the mail centers in Korea and the results showed that our method performs better than the conventional one.

• 한국컴퓨터정보학회논문지
• /
• 제21권9호
• /
• pp.27-36
• /
• 2016

Recognition of grapheme is a very important process in the recognition within 'Hangul(Korean written language)' letters using phoneme recognition. It is because the success or failure in the recognition of phoneme greatly affects the recognition of letters. For this reason, it is reported that separation of phonemes is the biggest difficulty in the phoneme recognition study. The current study separates and suggests the new phonemes that used the connective elements that are helpful for dividing phonemes, recommends the features for recognition of such suggested phonemes, databases this, and carried out a set of experiments of recognizing phonemes using the suggested features. The current study used 350 letters in the experiment of phoneme separation and recognition. In this particular kind of letters, there were 1,125 phonemes suggested. In the phoneme separation experiment, the phonemes were divided in the rate of 100%, and the phoneme recognition experiment showed the recognition rate of 98% in recognizing only 14 phonemes into different ones.

• 산업공학
• /
• 제8권3호
• /
• pp.259-267
• /
• 1995

A printed circuit board auto-insertion line consists of several processes of identical machines and produces several different types of PCBs. Each board must be processed by at most one machine in each process. So, we call it a flexible flow line. The load balancing is the one of the most important issues in the FFL which has many sequential processes. Therefore we have represented the job route selection model to balance the load of inter-process in the PCB auto-insertion line, and validated it by simulation.

• 한국산학기술학회논문지
• /
• 제7권1호
• /
• pp.52-56
• /
• 2006

본 논문에서는 산악지형이 많은 한반도에서 전파의 다중경로 전달 특성을 분석하여 최적의 레이다 운용 사이트를 선정하고 레이다에 발생되는 전파를 효율적으로 관리함으로써 레이다 운용을 적에게 최소로 노출시켜 대방사미사일의 공격을 피하면서 원하는 정보를 충분히 획득하는 전자보호 기술에 대해서 기술하였다. 또한 다중 경로에 의한 전파의 위상 특성을 분석하여 전력밀도의 변화를 분석하였다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2004년도 춘계학술발표대회
• /
• pp.351-354
• /
• 2004

본 논문에서는 낱자에서 추출한 특징을 입력으로 사용하는 자소 인식기를 이용한 저해상도 인쇄체 한글 영상의 인식 방법을 제안하였다. 제안한 방법에서는 입력 문자를 한글 6 형식과 기타 형식의 문자, 총 7 종으로 분류한 뒤, 입력 문자를 인식 대상 문자의 수와 자소 복잡도에 따라 하나 또는 두 개의 인식 단위로 구분하여 인식한다. 각 HRU는 낱자에서 추출한 방향각 특징을 입력으로 사용하는 다층 신경망 인식기를 이용하여 인식한다. 다음으로, 각 다층 신경망 인식기의 신뢰도를 조합하여 최종 인식 결과를 도출한다. 제안한 방법을 사용한 실험에서 98.99%의 인식률을 얻을 수 있었으며, 이는 기존 방법에 비해 15.83%의 오류가 감소한 것이다.

• 한국정밀공학회지
• /
• 제12권8호
• /
• pp.106-113
• /
• 1995

Surface mounters are used to mount the parts of electronic products on PCB(Printed Circuit Board. Those machines rely on high precision, high productivity, and software for accomodation of use. In this paper, two algorithms and a software which can give the users the acco-modation and high productivity for rotary type surface mounters are presented. The algo- rithms for development of of the software consider all factors which affect the effeciency of the operation. And the interface between user and machine for the accomodation of use can be achieved through the developed software.

• 한국산학기술학회논문지
• /
• 제14권2호
• /
• pp.554-560
• /
• 2013

본 연구에서는 양쪽 대칭으로 지지할 수 있는 쉴드캔 클립을 제안하며, 그 특징은 장착과 탈착의 하중을 일정하게 하고 납땜 부위의 평판도를 유지 할 수 있도록 개발하였다. 또한 인쇄회로기판에 부착 고정되는 베이스부 및 쉴드캔의 측벽을 집게 형태로 집을 수 있도록 하는 클립부로 구성되며, 클립부 중앙을 절단하여 2군데를 지지 할 수 있게 이루어진다. 또한 넓어진 베이스부와 인쇄회로기판 사이에 납땜이 잘될 수 있도록 오목한 홈을 만들었다. 연구절차는 우선 메커니즘을 설정하고 구조해석 및 진동모드 해석을 수행하여 설계변수를 확정한 후, 제품을 설계하였다. 제조를 위한 전용기를 개발한 후 시제품을 제작하여 성능 평가 후 해석값과 비교 분석하였다.

• 한국인쇄학회지
• /
• 제31권1호
• /
• pp.65-78
• /
• 2013

In gravure printing ink in printed flexible packaging considering the characteristics of the study more accurate color management options and results were as follows. When applying G7 calibration, P2P of the target GRACol G7 evaluate the delta $L^*$ and delta $F^*$, CMY and K-scale average of the results of delta $L^*$ and the highest tolerance G7 average of 1.5 and 3.0 are included in all the best. In addition, the average delta $F^*$ and super delta $F^*$, G7 tolerance by being included within the scope of color management, G7 calibration was possible. Target IT 8.7/4 CMYK, when applied to the calibration G7, Color gravure printing machine is applied to the average of the previous decreased from 12.4 to 3.6. In addition, if a digital proof is EPSON WT 7900 the average color applied to the previous reduction from 5.24 to 0.74 because of the gravure printing color proofing system was effective in the management. G7 calibration by applying the reference print profile of the Epson WT 7900-G-icc, the average was 0.74 coloration, and gravure-G-icc cases, the average color of the 3.60 per GRACol average of all the five colors below were included within the allowable range. Thus, the flexible packaging gravure printing color management of printed after applying the first G7 calibration, the results refer to the press by the profiling, and where best to take advantage of the profile creation was good.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제26권11호
• /
• pp.1342-1349
• /
• 1999

본 논문에서는 문서 내의 인접한 두 행 사이에는 일정한 두께의 공백 행이 존재하며 그 공백 행의 기울기는 실제 문서의 기울어진 정도를 반영한다는 사실에 기반하여, 선형적으로 기울어진 문서 영상의 기울기 추정을 위한 고속의 알고리즘을 제안한다. 먼저, 간단한 모폴로지 연산(dilation)을 이용하여 문자행 영역과 공백행 영역을 분리한 후, 이를 일정 간격으로 수직 샘플링하여 수직선 상에 있는 모든 공백행의 중심점(행간점)을 찾는다. 동일한 공백 행 상에 있는 인접한 두 행간점 간에 기울기를 계산하고, 전체 영상으로부터 이들의 분포를 조사하여 최대 빈도를 가지는 기울기를 입력 문서의 기울기로 추정한다. 실험에서는 제안한 알고리즘을 필기체 및 인쇄체를 포함하는 다양한 형태의 가로쓰기 문서에 적용한 결과를 보인다.Abstract In this paper, we propose a fast algorithm to estimate the skew angle of linearly skewed document images. This paper is based on the fact that there is a blank line with uniform thickness between two adjacent text lines and the slope of the line is the same as that of the document. Firstly, we apply a dilation operation to the image to separate blank lines from text lines, and we detect center points of blank lines along the vertically sampled lines. Then we calculate the slope between neighboring center points in the same blank line. Calculated slopes for the entire image are accumulated on the histogram to display the distribution of them. Finally, the peak in the histogram is detected and estimated as the slope of the document image. In the experiments, we adopted a lot of images of various format with hand-printed or machine-printed document to verify our algorithm.

• 대한두개안면성형외과학회지
• /
• 제16권1호
• /
• pp.11-16
• /
• 2015

Background: Source material used to fill calvarial defects includes autologous bones and synthetic alternatives. While autologous bone is preferable to synthetic material, autologous reconstruction is not always feasible due to defect size, unacceptable donor-site morbidity, and other issues. Today, advanced three-dimensional (3D) printing techniques allow for fabrication of titanium implants customized to the exact need of individual patients with calvarial defects. In this report, we present three cases of calvarial reconstructions using 3D-printed porous titanium implants. Methods: From 2013 through 2014, three calvarial defects were repaired using custom-made 3D porous titanium implants. The defects were due either to traumatic subdural hematoma or to meningioma and were located in parieto-occipital, fronto-temporo-parietal, and parieto-temporal areas. The implants were prepared using individual 3D computed tomography (CT) data, Mimics software, and an electron beam melting machine. For each patient, several designs of the implant were evaluated against 3D-printed skull models. All three cases had a custom-made 3D porous titanium implant laid on the defect and rigid fixation was done with 8 mm screws. Results: The custom-made 3D implants fit each patient's skull defect precisely without any dead space. The operative site healed without any specific complications. Postoperative CTs revealed the implants to be in correct position. Conclusion: An autologous graft is not a feasible option in the reconstruction of large calvarial defects. Ideally, synthetic materials for calvarial reconstruction should be easily applicable, durable, and strong. In these aspects, a 3D titanium implant can be an optimal source material in calvarial reconstruction.