• 한국정밀공학회지
• /
• 제22권2호
• /
• pp.172-179
• /
• 2005

A high-precision centerless grinding machine has been recognized as a core equipment performing the finish outer-diameter grinding process of ferrules which are widely used as fiber optic connectors. In this study, in order to realize the high-precision centerless grinding machine, the structural characteristic analysis and evaluation are carried out on the virtual prototype consisted of the steel bed, hydrostatic GW and RW spindle systems, hydrostatic RW feed mechanism, RW swivel mechanism, and on-machine GW and RW dressers. The loop stiffnesses of centerless grinding machine are estimated based on the relative deformations between GW and RW caused by the grinding forces. And the simulated results illustrate that the concrete-filled bed has the considerable effect on the improvement of the structural stiffness of centerless grinding machine.

• 한국생산제조학회지
• /
• 제18권4호
• /
• pp.375-380
• /
• 2009

In this paper, it has been proposed an automatic vegetable bundling mechanism that makes use of heat melt sticking. The proposed mechanism is consisted of three modules for the rationality of manufacture. Design specification has been determined by the bundling mechanism that was optimized mechanically. And, it has been manufactured the prototype of the automatic bundling machine. It has been carried out directly the field test for verification of performance in farmhouse which produces vegetable. In field test, this bundling machine showed efficiency of about 3.6 times than the manual working by manpower, and other performance it got satisfied result. This automatic vegetable-bundling machine was already registered as the agricultural machine. and This machine will be commercialized soon.

• Journal of Electrical Engineering and information Science
• /
• 제2권4호
• /
• pp.79-85
• /
• 1997

A unified, modular and decoupled approach for the simulation of converter fed induction machine systems is presented. The system under consideration could have semiconductor devices connected to the stator or the rotor of the induction machine for the purpose of controlling its performance. The machine model, however is invariant to these aspects. The model spans the circuit and equation domains of description thus allowing he advantages of both these domains of descriptions to be utilized. The results obtained using this machine and switch model for a VSI fed induction machine (stator fed, rotor shorted0 are compared with those from laboratory experiment to establish the validity and accuracy of th approach. Results for a slip energy recovery system are also presented and compared with those of earlier workers to establish the performance of the models and algorithms in he doubly-fed mode of operation of induction machine systems.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2000년도 춘계학술대회 발표논문집
• /
• pp.223-230
• /
• 2000

This work aims to develop modeling methodology of machine part reliability. The reliability model is to be used for predicting and improving reliability in planning and design processes of products. In order to develop the reliability model of machine parts, the functions and interactions of sub-units of machine parts are analyzed first and function network is constructed. Using the function network, function block diagram is developed, which can be the basis for deriving reliability block diagram. Modeling of machine part reliability has not been widely studied since the reliability modeling of machine parts requires understanding of the functions and failures of their components in several viewpoints. This work tries to find general methodology of reliability modeling and proposes a framework for reliability improvement during machine part development.

• 대한기계학회논문집A
• /
• 제25권9호
• /
• pp.1317-1324
• /
• 2001

In this paper, a methodology of geometrical error identification and compensation for NC machine tool position is developed. We propose a reference artifact with measuring the geometry of coordinate system for compensating linear scale error of NC machine. The coordinate system of the NC machine could be compensated successfully with the information obtained by measuring the reference artifact and our compensation algorithm. Monte Carlo simulation is used to evaluate coordinate referencing ability and, the uncertainties of the machine tool position is estimated and observed through the compensation process by simulation.

• 산업기술연구
• /
• 제14권
• /
• pp.119-125
• /
• 1994

Ultra-precision machine tool equipped with the diamond bite tip is used to machine optical products, drums of VTR or computer hard disk. It needs nano technology in the surface roughness of workpiece. To perform the nano scale machining, ultra-precision machine tool must be designed and manufactured in consideration of the vibration characteristics. In this paper, using the finite element analysis, we investigate the modal parameters of the ultra-precision machine tool structures, which use cast iron, granite and alumina ceramic for the bed materials. To verify the numerical results, we manufacture a model of ultra-precision machine tool using granite bed and perform impulse test. Through the theoretical and experimental analyses, we could compare and estimate the vibration characteristics of the three models for the ultra-precision machine tools.

• 한국CDE학회논문집
• /
• 제6권4호
• /
• pp.236-243
• /
• 2001

A key factor far realizing the internet-based virtual manufacturing system(VMS) and virtual enter-prise(VE) is how to precisely and effectively represent the machine elements and mechanics. In this paper, we present methods to represent the numerically controlled machine tools in the internet environment. The method is composed of: 1) geometrical modeling of the machine tools, 2) kinematic modeling for the movements of the machine tools, and 3) representing the developed model in the internet infrastructure. Based on the models. a web-based virtual machine tools (WVMT) is developed, and it can be accessed at hrrp://wvmt.postech.ac.kr. The WVMT can be used for various purposes: 1) web-based virtual manufacturing system, 2) web-based CAM system, and 3) CNC educational tools for the vocational school through internet.

• 한국기계가공학회지
• /
• 제9권1호
• /
• pp.8-13
• /
• 2010

The shaft surface machining is a popular machine for studying descale machine design and process in automobile industry. In this study, the descale design machine of cutting shaft surface was conducted for the detection of a tool failure in surface process. Induction harden surface is used as analyzing function to detect a sudden change in cutting process level. A preliminary stepped workpiece which had a hard condition was cut by the surface tool and a tool process obtained cutting force machine. At machine failure, the results were suddenly increased and the detailed surfaces were extremely obtained.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 춘계학술대회 논문집
• /
• pp.181-186
• /
• 1999

Recently the machining technique have been progressed rapidly according to developments of the product technique in the machine tool and new tools. But in the case of vertical machine center(VMC), to become visible there is the appearance of bending because of the structural problems of x-axis guide way, and this would effect directly on accuracy of form of the straightness, parallelism and flatness. In this paper, I purpose to check the appearance of bending with the experiment and improve the working accuracy. Under the constant working conditions, the appearance of bending of x-axis guide way was measured to confirm the effectiveness of the compensation method in the vertical machine center(VMC). By using this method the results show that the accuracy of form of the straightness, parallelism and flatness could be reduced to 20% compared with ordinary method.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.377-382
• /
• 2005

This paper describes the design of micro machine tools system for mechanical machining of micro/meso scale mechanical parts. The micro machining systems such as $\mu-Late$, $\mu-milling/drilling$ machine and $\mu-grinding$ machine are the basic elements constructing $\mu-factory$ which gains more attention recently because of increasing needs of mico and nano-parts in various industrial and medical area. A miniaturized 3-axis milling machine with VCM stage and air spindle and palm-top size micro-late are designed, and air bearing stage and stepwise linear motion system with PZT are studied for motion system. The micro cutting characteristics are investigated experimentally, and reconfigurable machine structures are also considered.