• 한국작물학회지
• /
• 제26권1호
• /
• pp.45-50
• /
• 1981

Diurnal changes in leaf stomatal resistances were measured on leaf positions and both surfaces to investigate the stomatal response to irradiance in wheat, var. Chokwang and barley, var. Dongbori 1. Stomatal frequency and size were also determined to explain the control mechanism of gas exchanges in two species. The leaf diffusive resistances of two species decreased, as the sun rose, to minimum at 10 to 11 o'clock a.m. and increased gradually in the afternoon, even faster at sunset. As the adaxial irradiance increased, stomatal resistances decreased sensitively in the range of 30uEm$^{-2}$ㆍsec$^{-1}$ to 150uEm$^{-2}$ㆍsec$^{-1}$ quantum flux density. The stomatal opening of the abaxial surface began at lower irradiance and was completed earlier than the adaxial surface. The adaxial irradiances decreased in order of leaf position, flag, the 2nd, the 3rd leaf, and the stomatal resistances increased in the same order. Even under the same irradiance, the stomatal resistance of lower leaves were higher than those of upper leaves. The stomatal frequencies of lower leaves were less, but the stomatal size was greater than those of upper leaves. Consequently, the relative leaf area occupied by stomatal pores were constant among leaf positions in two species.

• 수산경영론집
• /
• 제41권1호
• /
• pp.25-52
• /
• 2010

The purpose of this paper is to suggest major strategies and necessary new projects for the medium- and long-term development of the Korean Fisheries Outlook Project. To suggest the Korean Fisheries Outlook Center with the above purpose, this paper employs Analytic Hierarchy Process analysis based on surveys obtained by special groups related with the KFOP. The survey is broadly composed of two goals; the medium- and long-term development directions and setting up of new furtherance projects. Each goal has upper and lower strategies respectively. The first goal, the medium- and long-term development directions, has four factors as upper strategies. The upper strategies are composed of accuracy, efficiency, timeliness, and political effectiveness of the fisheries outlook information. In addition, each upper strategy has three lower strategies respectively. For example, accuracy of the fisheries outlook information includes strength of data collection function, strength of satellite photography function, and strength of data analysis function. The second goal, setting up of new furtherance projects, has three factors as upper strategies. The upper strategies consist of accuracy promotion of outlook information using high-technique, field expansion of outlook species, and strength of analyzing function on oversea fisheries information. Each upper strategy has three lower strategies respectively. For instant, accuracy promotion of outlook information using high-technique has strength of information analysis function covered from production to consumption, strength of satellite information function, and structure of forecasting model on demand and supply by outlook species. The above upper and lower strategies were analytically drawn out through insightful interviews with special groups such as officials of the government, presidents of the producer and distributor groups, and researchers of the Korea Maritime Institute and other research institutes. As a result of AHP analysis, first, priorities of upper strategies with the medium- and long-term development directions are analyzed as accuracy, timeliness, political effectiveness, and efficiency in order. Also, priorities of all lower strategies reflecting priorities of upper strategies are examined as includes strength of data collection function on the fisheries outlook information, delivery of rapid information on outlook products for all people interested, strength of data analysis function on fisheries outlook information, strength of consumption outlook function on fish products, and strength of early warning system for domestic fish products in order. Second, priorities of upper strategies with the setting up of new furtherance projects are analyzed as accuracy promotion of outlook information using high-technique, field expansion of outlook species, and strength of analysis function on oversea fisheries information in order. In addition, priorities of all lower strategies reflecting priorities of upper strategies are examined as building up of forecasting model on demand and supply by outlook species, strength of information analysis function covering all steps from production to consumption, expansion of consumption outlook for consumers, strength of movement analysis function of oversea farming industry, and outlook expansion of farming species.

• 한국가정과학회지
• /
• 제7권3호
• /
• pp.35-48
• /
• 2004

In this study, by determining lower limb movements which cause significant changes in body surface lines, body parts with the greatest maximum expansion and contraction rate respectively were illustrated in descending order. Using unmarried female university students aged 18 - 24 as subjects, a total of 32 body surface categories (15 body surface lines and 17 body surface segment lines) were measured in one static and 9 movement poses. In particular, expansion and contraction levels and rates were measured and used in the analysis. The analysis first involved the calculation of the average measurement per body part in body surface line in static pose as well as of the average expansion and contraction levels and rates in 9 lower limb movements. Two-way MANOVA and multiple comparison analysis (Tukey) were conducted on movements and individual somatotypes regarding measurement per body part and expansion and contraction rates. Movements which cause measurements of body surface lines differed significantly in body surface line in static pose versus in movement were then identified. Among average expansion and contraction rates in such movements, maximum average expansion and contraction levels, maximum average expansion and contraction rate, and classes of expansion and contraction rate were determined per body part. The results of this study are as follows. First, 5 lower limb movements; F2, F5, F6, F7, F8, which caused significant changes in body surface lines were determined and illustrated in table 4. Second, the levels, rates, and classes of expansion and contraction rate per body part are illustrated in Tables 5 and 6. Body parts with the greatest maximum expansion rate were, in descending order: upper segment of center back leg line, upper segment of inner leg line, middle segment of center front leg line, posterior crotch length, anterior knee girth, anterior thigh girth, center back leg line, girth at crotch height, anterior midway thigh girth, hip girth, anterior crotch length, knee girth, waist girth, inner leg line, thigh girth, and crotch length. Those with the greatest maximum contraction rate were, in descending order: anterior crotch length, upper segment of center front leg line, lower segment of center back leg line, center front leg line, and posterior thigh girth. The maximum expansion rates and maximum contraction rates, which ranged from 2.05 to $35.95\%$ and from -0.20 to $-30.16\%$ respectively, were classified per body part into 4 ABCD classes. The body part with maximum expansion was the upper segment of the center back leg line at vertical body surface line, expanding by $35.95\%$ or 16.03cm in F5 flexion movement. In contrast, the body part with maximum contraction was the anterior crotch length at vertical body surface line, contracting by $-30.16\%$ or -10.54cm in F5 flexion movement. Both, however, were the body parts to expand or contract the most among all horizontal and vertical body surface lines.

• Tribology and Lubricants
• /
• 제25권5호
• /
• pp.348-358
• /
• 2009

To satisfy the more severe emission regulation and the demand of higher fuel economy in near future, the combustion pressure and power output of engines is going to be higher. In order to get the reduction of engine emission and the higher power, it is needed the reduction of the tension and width of ring pack. The lower tension ring and the manufacturing technology of cast iron thinner width ring can bring the friction reduction between the ring and liner during engine running. Therfore, the fuel economy can be achieved. Thereafter the engine emission can be reduced. In this study, by using a developed basic computer program that predicts the inter-ring pressure, the motion of ring and the inter-ring pressure through a crevice volume model between adjacent rings, and the oil film thickness and the friction computed by lubrication theories, it is to be examined the effect of friction reduction from piston ring pack equipped with thinner width ring and lower tension ring.

• 한국군사과학기술학회지
• /
• 제16권5호
• /
• pp.590-597
• /
• 2013

For a lower tier defense, the distance between a launcher and an engagement control station is quite important to estimate the proper defense area and to effectively arrange missile launchers. In this paper, we have analyzed an effectiveness of anti-ballistic missile launcher arrangement for the lower tier defense against the ballistic missile. The operation concept, specific configuration and aerodynamic characteristics of the ballistic missile such as SCUD-B/C, Nodong are considered in order to develop a realistic engagement simulation. The diverse engagement results through numerical simulations are provided to conduct the effectiveness analysis of anti-ballistic missiles.

• 동력기계공학회지
• /
• 제17권6호
• /
• pp.11-17
• /
• 2013

Esterified bio-diesel oil is normally used as blend oil of 3% that and 97% diesel fuel in Korea. Since specifics of it is similar to that of diesel fuel, availability of non-esterified bio-diesel oil that has a lower expenses of manufacturing is worthy of attention. However, bio-diesel oil has a demerit which it emits typically more NOx emission than diesel fuel. In this study, characteristic tests using blending oil with 95% gas oil and 5% bio-diesel oil were achieved at lower common rail pressure in order to improve this demerit. It was noticed that non-esterified bio-diesel oil has more similar characteristics to diesel fuel than esterified bio-diesel oil and it emits more NO emission by fuel NO mechanism.

• 한국자동차공학회논문집
• /
• 제11권3호
• /
• pp.161-166
• /
• 2003

In order to improve the fatigue lift of a lower control arm in the vehicle suspension, a new shape optimization procedure is presented. In this approach, the shape control point concept is introduced to reduce the numbers of shape design variables. Also, the two-level orthogonal way is employed to evaluate the design sensitivity of fatigue life with respect to those shape design variables, because the analytical design sensitivity information is not directly supplied from the commercial CAE softwares. In this approach, only the six design variables are used to approximate the shape of lower control arm. Then, performed are only 10 fatigue life analyses including the baseline design, 8 DOE models and the final design. The final design, the best combination obtained from the sensitivity information, can maximize the fatigue lift nearly two times as that of the baseline design, while reducing the 12 percentage of weight than it.

• 상하수도학회지
• /
• 제26권3호
• /
• pp.479-486
• /
• 2012

Runoff characteristics of pollutant loads of the lower Han River was studied before full implementation of Total Pollution Load Management System(TPLMS). Magnitude of macroscopic(annual) fluctuation was in the order of Namhan River > Han River > Bukhan River, gross weight TP > gross weight TN > gross weight BOD, gross weight deviation > concentration deviation. Flux variation was higher than that of concentration. Microscopic(weekly) fluctuation showed similar pattern to macroscopic scale. TP showed the highest deviation resulting in the lowest reliability. 60% of annual flux passed during summer 3months resulting in 43-46% pass of gross weight at the lower Han River. Strong correlation was found between flux and gross weight especially in gross weight TN. Gross weight pollution increased as high as 400% while passing Seoul area due to the concentration. The deviation from moving average increased during summer season in the gross weight TP and BOD. Seasonal tendency was confirmed especially in gross weight TN and TP using autocorrelation function.

• Nuclear Engineering and Technology
• /
• 제48권4호
• /
• pp.906-914
• /
• 2016

We investigated the heat load imposed on the lower head of a reactor vessel by the natural convection of the oxide pool in a severe accident. Mass transfer experiments using a $CuSO_4-H_2SO_4$ electroplating system were performed based on the analogy between heat and mass transfer. The $Ra^{\prime}_H$ of $10^{14}$ order was achieved with a facility height of only 0.1 m. Three different volumetric heat sources were compared; two had identical configurations to those previously reported, and the other was designed by the authors. The measured Nu's of the lower head were about 30% lower than those previously reported. The measured angular heat flux ratios were similar to those reported in existing studies except for the peaks appearing near the top. The volumetric heat sources did not affect the Nu of the lower head but affected the Nu of the top plate by obstructing the rising flow from the bottom.

• 대한산업공학회지
• /
• 제29권3호
• /
• pp.239-246
• /
• 2003

Individual items are produced continuously from an industrial process. Each item is checked to determine whether it satisfies a lower screening limit for the quality characteristic which is the weight of an expensive ingredient. If it does, it is sold at a regular price; if it does not, it is reprocessed or sold at a reduced price. The process mean may be adjusted to a higher value in order to reduce the proportion of the nonconforming items. Using a higher process mean, however, may result in a higher production cost. In this paper, the optimal process mean and lower screening limit are determined in situations where the probability that an item functions well is given by a logistic function of the quality characteristic. Profit models are constructed which involve four price/cost components; selling prices, cost from an accepted nonconforming item, and reprocessing and inspection costs. Methods of finding the optimal process mean and lower screening limit are presented and numerical examples are given.