• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.2
• /
• pp.143-148
• /
• 2009

Introduction: To correct abnormal occlusal plane by orthognathic surgery, we need to have clear criteria for therapeutic occlusal plane. Authors introduced the concept of individualized ideal occlusal plane(Y-plane), which is determined by the size and form of the mandible, and the ideal incisor tip considering upper and lower lip. Authors studied the following to verify if the actual occlusal plane of the patients with optimal jaw relationship corresponds with the individualized ideal occlusal plane. Patients: We reviewed 44 patients who have normal occlusion visitied in the Dept. of orthodontics, Pundang CHA hospital. Methods: We evaluated if there are agreement between individualized ideal occlusal plane(Y plane) and occlusal plane of actual patients. And we confirmed if tested group has a normal face by measuring FABA, FMA, AB-LOP. Results: There were no significant differences of FABA, FMA, AB-LOP, Mo-Y plane between male and female. FABA, FMA and AB-LOP were included in the normal value. Average distance of Mo-Y plane was $0.75{\pm}0.78mm$. Conclusion: Individualized ideal occlusal plane may be applied to orthognathic surgery.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.2
• /
• pp.217-228
• /
• 2006

Statement of problem: Standard type of ITI solid implant model in the 6.2mm thick jaw bone was axisymmetrically modelled for finite element stress analyses. Purpose: Primary objective was to investigate the influences or the characteristic design configuration of the ITI solid implant model on the bone stress with the course of osseointegration process at the bone/implant interfaces. To simulate the characteristics of the osseointegration process, five different stages of the bone/implant interface model were implemented. As load conditions, vertical load of 50N was taken into consideration. Bone at the cervical region of implant was the areas of concern where the higher level of stress were likely to take place. Results: The results indicated that rather slightly different stress level could be obtained as a function of the osseointegration conditions. Conclusion: Under vertical load, the lower level of stress was observed at the cervical cortical bone in the initial and final stages of osseointegration. Relatively higher stress level, however, was observed during the transitional stages where the osseointegration at the cancellous bone interface were yet to fully develop.

• Journal of radiological science and technology
• /
• v.21 no.1
• /
• pp.24-28
• /
• 1998

A conventional treatment machine shapes x-ray fields by a set of dense metal collimators(jaws) built into the machine. These collimators are positioned by the therapist using hand controls in the treatment room, and usually remain stationary during treatment. The collimator jaws of treatment machines produce rectangular beams. Conventional beam shaping is accomplished through the use of a combination of these collimator jaws and secondary custom beam blocks attached to the accelerator beyond the collimator Jaws. The jaw positions for a particular field can be retrieved from a computer. One application of this increased capability is replacement of beam blocks for field-shaping with the MLC. There are three basic applications of the MLC. The first application is to replace conventional blocking. A second function of the MLC is related to conformal therapy, adjusting the field shape to match the beam's eye view projection of a planning target volume during treatment. The third application is the use of the MLC to achieve beam intensity modulation. The aim of this paper is to provide basic principle and to state fundamental concepts needed to implement the use of a multileaf collimator in the conventional clinical setting. The use of MLC field shaping is likely to save time and to incur a lower operating cost when compared to the use of beam blocks.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.55 no.6
• /
• pp.967-972
• /
• 2022

We investigated the molecular and morphological traits of 338 individual macrourids collected from the Southern Ocean (FAO area number, 88.1 and 88.3) between 2021 and 2022 by Korean bottom trawls. We first identified them as Macrourus caml and Macrourus whitsoni based on morphological traits, such as the number of pelvic fin rays (PF) and the rows of lower jaw teeth (LJT). However four individuals showed uncategorizable morphological characteristics such as PF and LJT numbers that overlapped between the two species. Subsequently, we obtained and analyzed 509 bp of the mtDNA COI sequences of 49 individuals, including the four unidentified individuals, and found only one single nucleotide polymorphism (SNP) that distinguished the two species. Finally, using our molecular identification key, we confirmed that each two individuals were misidentified as M. whitsoni and M. caml reversely. Our results suggest that the number of PF and LJT should be investigated together to accurately identify the two species.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.3
• /
• pp.324-330
• /
• 2023

We investigated the relative growth and squamation of larvae and juveniles of cultured Larimichthys polyactis. Analysis of the relative growth of larvae and juveniles showed that their preanal length, head length, eye diameter, body depth, and snout length increased with growth. There was no significant chage in the relative growth. The ratio of preanus length to standard length (SL) increased rapidly until SL was approximately 12 mm, and then increased gradually. Cycloid scales first appeared on the lateral line, progressed to the abdominal cavity at 15.13 mm SL, and expanded to the occipital region, base of pectoral fin, and ventral region of the eye at 17.82 mm SL. At 18.03 mm SL, scales formed on the cheek, and those at the base of pectoral fin and in the abdominal cavity were connected to each other. At 19.06 mm SL, major part of the head was covered by scales, except near the lower jaw. Cycloid scales on the lateral line changed to ctenoid scales at the range of 31.71-32.24 mm SL, and those on the nape changed at the range of 69.02-70.84 mm SL. Our results may help to establish conservation and management strategy for Larimichthys polyactis aquaculture.

• The Journal of Korean Academy of Prosthodontics
• /
• v.14 no.1
• /
• pp.41-46
• /
• 1976

The purpose of the current study was to investigate histologic changes in the alveolar bone of the lower molar region subsequent to the loss of their opposite molars, and to characterize chemical alterations by utilization of histochemical procedures. Twenty five rats(Sprague Dawley), approximately 150-200gm body weight, were used in this experiment. In the treated animals, upper molars were removed. The animals were decapitated by groups at the following intervals after teeth removals: 10th, 20th, 50th, 70th and 100th day. The normal, untreated rats were used as controls. The molar region of lower jaw, including the intact alvelar bone and teeth was dissected and specimens were decalcified in 3% formic acid. After the tissues were fully decalcified, the specimens were embedded in celloidin and sectioned in mesiodistal plane. These sections were stained in the following staining methods. Mallory azan stain and hematoxylin-eosin stain were utilized for structural evaluation. Polysaccharides were demonstrated by means of the PAS reaction. Acidmucopolysaccharides were studied by means of the colloidal iron stain. Alloxan-Schiff reaction was used for protein. The results were as follows: 1) In the control animals, bone resorption was noted in the distal alveolar bone proper and bone apposition was shown in the mesial alveolar bone proper. But in the treated animals, bone apposition was observed on the mesial and distal walls of the alveolus and osteoclastic activity was not noted in any walls. 2) Bone apposition was most prominent from the 10th to 20th day after treatment. 3) Appositional growth of cementum along the surface of root was prominent from the 50th to 70th day after treatment. 4) In the area where osteoblastic activity was apparent, osteoblasts were stained strongly in the PAS and alloxan-Schiff reaction. A plastic resorption line showed strong alloxan-Schiff reaction. 5) In the colloidal iron stain, the alveolar wall adjacent to the cementum apposition area was stained more strongly than the other areas.

• The Journal of the Korea Contents Association
• /
• v.14 no.11
• /
• pp.7-15
• /
• 2014

This paper proposed a recognition algorithm of human facial expressions using the PCA and the template matching. Firstly, face image is acquired using the Haar-like feature mask from an input image. The face image is divided into two images. One is the upper image including eye and eyebrow. The other is the lower image including mouth and jaw. The extraction of facial components, such as eye and mouth, begins getting eye image and mouth image. Then an eigenface is produced by the PCA training process with learning images. An eigeneye and an eigenmouth are produced from the eigenface. The eye image is obtained by the template matching the upper image with the eigeneye, and the mouth image is obtained by the template matching the lower image with the eigenmouth. The face recognition uses geometrical properties of the eye and mouth. The simulation results show that the proposed method has superior extraction ratio rather than previous results; the extraction ratio of mouth image is particularly reached to 99%. The face recognition system using the proposed method shows that recognition ratio is greater than 80% about three facial expressions, which are fright, being angered, happiness.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.44 no.3
• /
• pp.107-111
• /
• 2018

Objectives: A keratocystic odontogenic tumor (KOT) is a type of odontogenic tumor that mainly occurs in the posterior mandible. Most KOTs appear as solitary lesions; however, they sometimes occur as multiple cysts. This study analyzed the clinical features of multiple KOTs. Materials and Methods: The participants were diagnosed with KOT by biopsy with multiple surgical sites, and were patients at the Pusan National University Hospital and the Pusan National University Dental Hospital from January 1, 2005 to March 31, 2016. Charts, records, images and other findings were reviewed. Results: A total of 31 operations were conducted in 17 patients. The mean patient age was $28.4{\pm}20.1years$. Multiple KOTs were found to occur at a young age (P<0.01). The predominant sites were in the posterior mandible (28.6%). Most cases of multiple lesions appeared in both the upper and lower jaw, and 40.3% of lesions were associated with unerupted and impacted teeth. The overall recurrence rate measured by operation site was 10.4% (8/77 sites). No patients were associated with nevoid basal cell carcinoma syndrome. Conclusion: The pure recurrence rate was lower than estimated, but there was a higher possibility of secondary lesions regardless of the previous operation site; therefore, long-term follow-up is necessary.

• Archives of Plastic Surgery
• /
• v.32 no.3
• /
• pp.311-313
• /
• 2005

Generally, many Asian women tend to dislike the square jaw, as they believe it makes the face look wider, giving a stubborn and strong impression. Contouring of the mandible is therefore a relatively common aesthetic procedure among Asians. These days, the use of botulinum toxin for contouring of the lower face offer simple alternative to surgery. Motor point, which is the site over a muscle where its contraction may be elicited by a minimal intensity short duration electrical stimulus, is the optimal injection point of botulinum toxin. Study was undertaken to identify the location of motor point of the masseter muscle and the skin surface landmark. First, the thickest point of the masseter muscle was inspected through palpation and inspection by 3 different individual plastic surgeons and then compound muscle action potentials(CMAPs) of masseter muscle in 15 health volunteers were recorded using EMG. For the localization of the measured points, line between lateral canthus to the mandibular angle was used. Location of motor points were mapped to skin surface from lateral canthus in a percentage of the distance along the landmark line and in distance in millimeters. The clinical injection point was located at 71.69 percentile and 7.3 mm of the landmark line. The motor point test was located at 72.54 percentile and 7.1 mm of the landmark line. The depth of motor point was 16mm. There was no statistically significant difference between the clinical injection point and the motor point. We conclude that surface mapping of motor point of the masseter muscle would increase accessibility and accuracy in botulinum toxin injection for contouring of the lower face.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.6
• /
• pp.439-448
• /
• 2016

PURPOSE. The purposes of this study are to evaluate the internal and marginal adaptation of two widely used CAD/CAM systems and to study the effect of porcelain press veneering process on the prosthesis adaptation. MATERIALS AND METHODS. Molar of a lower jaw typodont resin model was prepared by adjusting a 1.0 mm circumferential chamfer, an occlusal reduction of 2.0 mm, and a $5^{\circ}$ convergence angle and was duplicated as an abrasion-resistant master die. The monolithic crowns and copings were fabricated with two different CAD/CAM system-Ceramil and Zirkonzahn systems. Two kinds of non-destructive analysis methods are used in this study. First, weight technique was used to determine the overall fitting accuracy. And, to evaluate internal and marginal fit of specific part, replica technique procedures were performed. RESULTS. The silicone weight for the cement space of monolithic crowns and copings manufactured with Ceramil system was significantly higher than that from Zirkonzahn system. This gap might cause the differences in the silicone weight because the prostheses were manufactured according to the recommendation of each system. Marginal discrepancies of copings made with Ceramil system were between 106 and $117{\mu}m$ and those from Zirkonzahn system were between 111 and $115{\mu}m$. Marginal discrepancies of copings made with Ceramil system were between 101 and $131{\mu}m$ and those from Zirkonzahn system were between 116 and $131{\mu}m$. CONCLUSION. Marginal discrepancy was relatively lower in Ceramil system and internal gap was smaller in Zirkonzahn system. There were significant differences in the internal gap of monolithic crown and coping among the 2 CAD/CAM systems. Marginal discrepancy produced from the 2 CAD/CAM systems were within a reported clinically acceptable range of marginal discrepancy.