• Journal of Sericultural and Entomological Science
• /
• v.17 no.2
• /
• pp.97-100
• /
• 1975

This work was carried out to investigate the effects of several mode of picking leaves in autumn on development and harvest of branches, The results obtained are summarized ： (1) The effects of picking leaves in autumn were more conspicuous in weight of branches in length and/or size of branches. (2) In inverse propotion to the amount of picking leaves in autumn, the total weights of branches showed heavy in the non-picking leaves, the lower half part and the middle part-treatment, whereas are light in the upper half- and the all leaves picking-treatment, In spite of excessive picking leaves in autumn however, the middle part-treatment presented heavy weight of branches. (3) The yield of leaves in spring silkworm rearing, in propotion to the amount of picking leaves, were heavy in order of the non-picking leaves-, the middle part, and the lower half part-treatment, while both the upper half and the all leaves picking-treatment showed small amount of harvest. (4) The total yield of mulberry leaves and shoots of middle part-treatment, which showed the largest number of all was larger than that of the non-picking leaves and the all leave picking-treatment (leaving 5 leaves from upper part of shoot) at the ratio of 36％ and 13％, respectively.

• Korean Journal of Human Ecology
• /
• v.9 no.4
• /
• pp.471-482
• /
• 2000

The purpose of this study is to produce slacks pattern for pregnant women in the mid or second half period of their pregnancy according to the development figure of the body shell from a follow-up measurement. We here would like to produce slacks pattern for pregnant women constructed to fit better with their individual property in their figure and to help maintain the shape and beauty of the lower half of body and would compare it with two manufactured slacks pattern. The results of the study were as follows; 1. As the pregnancy proceeds, the height of natural-waist line went up spontaneously due to the projection of abdominal region, therefore, it was given darts at the front zipper part so that they could maintain a nice figure and to avoid possibility of feeling oppressed. To acquire a slimmer outfit, we made of the slacks-bottom narrower than the width at the knee line, and it worked out. 2. Sensory evaluation for appearance: According to the statistical of the result of 19items on the questionaire, all items showed significant difference(a$\leq$0.01) between the new and A(bunka) B(Kim's pattern) method slacks pattern, with the new pattern having higher scores. The new drafting method proved to be better fitted, to fit the shape of bodies properly and to get a visual effect to look slim.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.14 no.1
• /
• pp.17-26
• /
• 1984

The purpose of this study was radiographic analysis of the morphology of maxillary sinus in adolescents and adults. In order to analize the morphology of maxillary sinus in view point of anteroposterior width of medial wall, vertical distance between antral floor and nasal floor level, anterior extension, distance between antral floor and maxillary 1st molar apex, and types of lower border of maxillary sinus, specialized maxillary projection and periapical view with paralleling technique was taken. The author examined orthopantomograms and intraoral standard views taken from 400 adolescents and adults ranged 15-65 year-old. The obtained results were as follows: 1. The antero-posterior width of medial wall of maxillary sinus was 32.80mm in 15-19 year-old group, 33.86㎜ in 20-24 year-old group, 34.09㎜ in 25-29 year-old group, and 33.67㎜ in 30-65 year-old group, and the left maxillary sinus was somewhat smaller than the right. 2. The vertical distance between antral floor and nasal floor level was 8.49㎜ in 15-19 year-old group, 9.05㎜ in 20-24 year-old group, 8.95㎜ in 25-29 year-old group, and 8.32㎜ in 30-65 year-old group. 3. The order of anterior extension of maxillary sinus were distal half of canine, mesial half of canine, mesial half of 1st premolar, and distal half of 1st premolar. 4. The distance between antral floor and maxillary 1st molar were 4.36㎜ in 15-19 year-old group, 4.77㎜ in 20-24 year-old group, 3.58㎜ in 25-29 year-old group, and 2.33㎜ in 30-65 year-old group. 5. The order of the types of lower border of maxillary sinus were entire downward type, close type, partially downward type, waving type, separating type, and indistinct. In the types of antral floor, there was a tendency to increase the seperating type with age.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.20 no.6
• /
• pp.387-395
• /
• 2020

Background: The anterior-middle superior alveolar (AMSA) anesthetic technique has been reported to be a less traumatic alternative to several conventional nerve blocks and local infiltration for anesthesia of the maxillary teeth, their periodontium, and the palate. However, its anatomic basis remains controversial. The present study aimed to determine if the pattern of cortical and cancellous bone density in the maxillary premolar region can provide a rationale for the success of the AMSA anesthetic technique. Method: Cone-beam computed tomography scans of 66 maxillary quadrants from 34 patients (16 men and 18 women) were evaluated using a volumetric imaging software for cortical and cancellous bone densities in three interdental regions between the canine and first molar. Bone density was measured in Hounsfield units (HU) separately for the buccal cortical, palatal cortical, buccal cancellous, and palatal cancellous bones. Mean HU values were compared using the Mann-Whitney U test and one-way ANOVA with post-hoc analysis. Results: Cancellous bone density was significantly lower (P ≤ 0.001) in the palatal half than in the buccal half across all three interdental regions. However, there was no significant difference (P = 0.106) between the buccal and palatal cortical bone densities at the site of AMSA injection. No significant difference was observed between the two genders for any of the evaluated parameters. Conclusions: The palatal half of the cancellous bone had a significantly lower density than the buccal half, which could be a reason for the effective diffusion of the anesthetic solution following a palatal injection during the AMSA anesthetic technique.

• The Korean Journal of Pain
• /
• v.14 no.2
• /
• pp.199-206
• /
• 2001

Background: The lumbar sympathetic ganglia are variable in both position and numbers. The aim of this study was to detect the appropriate lumbar vertebral level where the lumbar sympathetic ganglia primarily aggregate. Methods: Forty patients comprising of hyperhidrosis (26 cases), complex regional pain syndrome (10 cases), peripheral artery occlusion disease (3 cases) and postherpetic neuralgia (1 case) underwent lumbar sympathetic block. We randomly selected one of two (L2 or L3) levels and the L4 level. The position of the needle tip and distribution of dye was verified by injection of a mixture of radio-opaque dye (1.5 ml) and 4% lidocaine (1.5 ml) and subsequently confirmed by L-spine anteroposterior and a lateral view X-ray. We considered the response positive when the skin temperature increased more than $1^{\circ}C$ in 5 min. Results: In general, the positive response ratio was greater when the needle tip located at the L2 or L4 level vice L3 and when the drug was distributed on the lower half of the L4 body and in the L4/5 intervertebral disc space. In a right side block, the positive response ratio was greater when the drug was distributed on the lower half of the L4 body and in the L4/5 intervertebral disc space, although in a left side block there was no significant difference seen between the levels. The complications of the neurolytic block were alcohol neuritis (7.5%) and hypoesthesia (5%) on the L1 or L2 dermatome. Conclusions: The best effect with least chance of complication may be induced by spreading the drug on the lower half of the L4 body and/or into the L4/5 intervertebral disc space by placing the needle tip on the L4 body.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.4
• /
• pp.21-28
• /
• 2000

This study is conducted to analyze effects of soil moisture on the growth of maple(Acer palmatum) under indoor low light intensity. Maples grew under three different light intensities such as sunny place(average 353.2W/$m^2$), half shade(average 7.7 W/$m^2$) and shade/(average 1.9W/$m^2$).Under half shady and shady condition, each 24 planters(2 maples planted in each planter) were used and divided into 3 groups treated with different watering points. Three levels of soil water potential were set for watering points, such as -200mbar, -300mbar or -500mbar. Under sunny condition, there were only group of 8 planters, as comparison. Watering was applied when soil water potentials reached -500maber. The results of plant growth experiment are as followed. 1. Under the shady condition, 32 maples died among 48 maples for 7 months. 9 maples survived, watered at soil water potential -200mbar, 5maples at -300mbar and 2maples at -500mbar. 2. Leaf water content ratios were higher under lower light intensity. For the cell wall became thinner under lower light intensity. 3. Maples in shady were easy to die due to having thin cell wall, therefore they were easy to loss the turgor pressure. 4. In case of half shady condition, the group, watered at soil water potential -200mbar, had much smaller amount of rootlet than -300mbar, because there were excessive soil water. The group, watered at soil water potential -500mbar, had smaller amount of rootlet than -300mbar and there was a remarkable difference in leaf water potential in spite of nearly same soil water potential, because leaves received the water stress under lower soil water potential. 5. When maples grew soundly, the leaf water potential was largely influenced by the soil water potential.

• Journal of Korean Academy of Nursing
• /
• v.21 no.1
• /
• pp.27-40
• /
• 1991

Perineal discomfort from episiotomy continues to be a problem for many postpartum women. The purposes of this study were to compare the effect of ice bag and heat lamp for the relief of perineal discomfort and to identify the sustaining time of each effect. Forty women took ice bag and heat lamp with random assignment of initial therapy. Women rated the degree of perineal discomfort before and after each therapy and at half-hour, tow-hour and four-hour intervals after each therapy. A discomfort scale, 18cm graphic rating scale, was used. The results of the study were as follows ; 1. The ice bag group showed significantly lower discomfort score than the heat lamp group at the half- hour and two - hour intervals after therapy. 2. The ice bag group showed significantly lower discomfort score for 4hrs after than before therapy, but the heat lamp group did not show significantly lower discomfort score. 3. Neither the type of episiotomy nor the previous experience of heat therapy influenced on the effect of ice bag relieving the perineal discomfort. Therefore ice bag was significantly mere effective in relieving perineal discomfort than heat lamp. Subjective responeses of patients who took both therapy were very favorable toward ice bag. I suggested that nurses should provide women with adequate information about the use of ice bag and encourage to apply ice bag instead of heat lamp after episiotomy in order to promote the relief of perineal discomfort and the healing of perineal wound.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.3
• /
• pp.251-259
• /
• 2009

In this paper, a contactless power supply using half-bridge series resonant converter that achieves ZVS operation of main switches and ZCS operation of secondary side diodes is proposed. Since the proposed contactless power supply using half-bridge series resonant converter operates with lower switching frequency than the resonant frequency, it can achieve ZCS operation of secondary side diodes due to discontinuous resonant current. And it is also possible to control the converter in narrow frequency range and to obtain high voltage gain, which, in turn, offers low turns ratio for the transformer and high efficiency. Based on the theoretical analysis and simulation results, the 3.15W prototype is built and the final experimental results are described.

• Current Photovoltaic Research
• /
• v.7 no.3
• /
• pp.65-70
• /
• 2019

As a demand of higher power photovoltaic modules, shingled, multi-busbar, half-cell, and bifacial techniques are developed. Multi-busbar module has advantage for large amount of light havesting. And, half-cell is high power module for reducing resistive losses and higher shade tolerance. Recently, researches on multi-busbar is focused on reliability according to adhesion and intermetallic compound between Sn-Pb solder and Ag electrode. And half-cell module is researched to comparing with full-sized cell module for structure difference. In this study, we investigated the factors affecting to efficiency and adhesion of multi-wires half-cell module according to wire thickness, solder thickness, and flux. The results of solar simulator and peel test was that peel strength and efficiency of soldered cell is not related. But samples with flux including high solid material showed high efficiency. The results of FE-SEM and EDX line scan on cross-section between wire and Ag electrode for different flux showed thickness of solder joint between wire and Ag electrode is increasing through solid material increasing. Flux including high solid material would affect to solder behavior on Ag electrode. Higher solid material occurred lower growth of IMC layer because solder permeate to sider of wire ribbon than Ag electrode. And it increased fill factor for high efficiency. In soldering process, amount of solid material in flux and solder thickness are the factor related with characteristic of soldered photovoltaic cell.

• Journal of Power Electronics
• /
• v.6 no.4
• /
• pp.330-339
• /
• 2006

This paper deals with novel electronic ballast based on single-stage power processing topology using a symmetrical half-bridge inverter and current injection circuit. The half-bridge inverter drives the output parallel resonant circuit and injects current through the power factor correction (PFC) circuit. Because of high frequency current injection and high frequency modulated voltage, the proposed circuit maintains the unity power factor (UPF) with low THD even under wide variation in ac input voltage. This circuit needs minimum and lower sized components to achieve the UPF and high efficiency. This leads to an increase in reliability of ballast at low cost. Furthermore, to reduce cost, the electronic ballast is designed for two series-connected fluorescent lamps (FL). The analysis and experimental results are presented for ($2{\times}36$ Watt) fluorescent lamps operating at 50 kHz switching frequency and input line voltage (230 V, 50 Hz).