• Journal of the Korean Ceramic Society
• /
• v.47 no.5
• /
• pp.365-372
• /
• 2010

This paper was to evaluate the influence of kiln process parameter(kiln angle, kiln rotating speed) of lightweight aggregate using waste glass and bottom ash with industrial by-products on thermal conductivity, density, water absorption, fracture load and porosity by response surface analysis. In the results of surface plot and contour plot, it has verified that kiln residence time of lightweight aggregate increase as kiln angle and rotating speed decreases. For this reason, pore size and quantity tend to increase by active reaction of forming agent. It seems to be that increase in pore size and quantity have caused decreasing density, fracture load and thermal conductivity, and increasing water absorption. In conclusion, optimization of kiln process parameter on thermal conductivity, density, water absorption, fracture load and porosity by response surface analysis are kiln angle 2.4646%, kiln rotating speed 40.7089 rpm.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.5
• /
• pp.339-343
• /
• 1999

This paper reports the characteristics of poly-Si TFT unitary CMOS circuits fabricated with various techniques, in order to investigate the optimum process conditions. The active films were deposited by PECVD and LPCVD using $SiH_4\; and\; Si_2H_6$ as source gas, and annealed by SPC and ELA methods. The impurity doping of the oource and drain electrodes was performed by ion implantation and ion shower. In order to investigate the AC characteristics of the poly-Si TFTs processed with various methods, we have examined the current driving characteristics of the polt-Si TFT and the frequency characteristics of 23-stage CMOS ring oscillators. Ithas been observed that the circuits fabricated using $Si_2H_6$ with low-temperature process of ELA exhibit high switching speed and current driving performances, thus suitable for real application of large area electronics.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.10a
• /
• pp.120-122
• /
• 1998

현재 상업화되어있는 RO membrane으로는 크게 asymmetric membrane과 composite membrane으로 구분될 수 있다. Asymmetric membrane의 소재로는 Cellulose acetate나 Cellulose triacetate와 같은 것들이 사용되며 현재에도 많이 사용되고 있으나, 보다 더 우수한 성능을 갖는 분리막을 제조하기 위해 현재에는 주로 composite membrane 형태로 제조된다. 대부분의 composite membrane은 계면중합에 의해 제조되는데 대표적인 membranem으로는 FT-30이 있다. 이 밖에도 support의 표면을 직접 플라즈마 처리하여 복합막을 제조하는 공정이 있으며 polyactrylonitrile과 같은 membrane이 이에 속한다. 플라즈마 처리된 복합막은 처리 대상에 크게 영향을 받지 않고 support 표면에 crosslinking의 형태로 형성되기 때문에 active layer가 매우 안정하며 따라서 우수한 물리화학적 성질을 기대할 수 있다. 이밖에도 분리막 표면을 친수성 단량체로 플라즈마 처리함으로써 분리막 표면에 친수성을 부여하거나 관능기를 도입함으로써 불활성 표면을 활성화 시킬 수도 있는 등의 여러가지 장점을 가지고 있다.

• Journal of The Korean Astronomical Society
• /
• v.9 no.1
• /
• pp.1-6
• /
• 1976

The translational and reactive parts of thermal conductivity of a partially ionized solar magneto-plasma gas have been calculated based on Yun and Wyller's formulation (1972) along with Devoto's theory(1968). The computed results are presented as functions of temperature and pressure for given magnetic field strengths. The results of the calculations show that for most photospheric conditions the magnetic field does not play any important role in characterizing thermal properties of the ionized gas. However, when the gas pressure is low(e.g., P<10 dynes/$cm^2)$) the field becomes extremely effective even if its strength is quite small (e.g., B<0.1 gauss). The reactive part of the thermal transport is found to be very important when the gas is undertaking active ionization.

• Journal of the Optical Society of Korea
• /
• v.5 no.3
• /
• pp.83-89
• /
• 2001

Room temperature quasi-continuous operation is achieved near 1556 nm with threshold current as low as 2.2 mA from a 5.6-${\mu}{\textrm}{m}$ oxide-aperture vertical-cavity surface-emitting laser. Wafer fusion techniques are employed to combine the GaAs/AlGaAs mirror and the InP-based InGaAs/InGaAsP active layer. In this structure, an $Al_x/O_y$/GaAs distributed bragg reflector and intra-cavity contacts are used to reduce free carrier absorption.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.3
• /
• pp.22-25
• /
• 2022

Metal oxide semiconductor (MOS) based on spray-pyrolysis deposition technique has attracted large attention due to simple and low-cost processibility while preserving their intrinsic optical and electrical characteristics. However, their high process temperature limits practical applications. Here, we demonstrated the nc-ZnO/ZnO field-effect transistors (FETs) via spray-pyrolysis as incorporating ZnO nanocrystalline nanoparticles into typical ZnO precursor. The nc-ZnO/ZnO FETs exhibit good quality of electrical properties. Our experiments reveal that nc-ZnO in active layer enhance electrical characteristics.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.53-56
• /
• 2009

In this paper, performance evaluation of catalyst for hydrogen peroxide thruster with drying condition is described. Platinum was selected as a catalyst, and alumina of pellet type was chosen as a catalyst support. Evaporation method known as general method for catalyst production was used to make the catalyst. From previous experiments, it is favorable during catalyst making process that solution of active material has low pH level. Therefore, some kinds of low pH level solution had been tested. The drying temperatures are 25, 50, 70, and $90^{\circ}C$. From experimental results, it shows better performance that drying temperature was $90^{\circ}C$ since the catalyst particle could not be crystallized but be evenly spreaded out due to the rapid evaporation of solvent.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.84-84
• /
• 2008

A multidimensional ZnO light-emitting diode LEDstructure comprising film/nanorods/substrate was fabricated on a p-type Si substrate using metal organic chemical vapor deposition at relatively low growth temperature. The filmlike top layer used for the metal contact was continuously formed on the ZnO nanorods by varying the growth conditions and the resulting structure allowed us to utilize the nanorods with intense emission as an active layer. We investigated the performance of the resulting multidimensional LED. An extremely high breakdown voltage and low reverse leakage current as well as typical rectification behavior were observed in the I-V characteristics.

• Applied Biological Chemistry
• /
• v.34 no.2
• /
• pp.162-167
• /
• 1991

In an attempt to explore the mechanistic aspects of chilling injury in plants and their defensive measures against the low temperature stress, the time sequential measurements of pyruvate, superoxide radicals$(O_{\overline{2}})$ and antioxygenic enzymes during whole period of injury-inducing treatment were performed using mostly rice seedlings. Pyruvate was substantialy accumulated in leaf tissues during the exposure period to $5^{\circ}C$ of the seedlings ; the relative extent of the accumulation was increased with increasing time of the cold treatment. When the cold-treated plants were translocated to ambient temperature$({\sim}25^{\circ}C)$, the accumulation started to dissipate, concomitantly accompaning a remarkable increase in the $O_{\overline{2}}$ level of tissues. Superoxide dismutase(SOD) and catalase were also activated during post-chilling period, although they showed a considerable lag time for activation. In contrast, glutathione peroxidase, another antioxygenic enzyme in cells, was not activated at all by preceding cold treatment of plants. The uptake of exogenous $O_{\overline{2}}$ by the roots of rice seedlings resulted in increase in the activities of SOD and catalase in root tissues. The supply of $H_2O_2$ to plan st brought about the activation of catalase in situ, while failing to exert any effect on the activation state of glutathione peroxidase. The results obtained in this work suggest that pyruvate accumulation in cells is the direct cause of the overproduction of $O_{\overline{2}}$ and thereby other toxic activated oxygen species, and that SOD and catalase may play a crucial role in the protection of plant cells against active oxygen-mediated chilling injury.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.9 no.4
• /
• pp.228-233
• /
• 2007

Pear psylla, Caccopsylla pyricola (Homoptera: Psyllidae), is a serious insect pest in pear orchards. C. pyricola overwinters as adults under rough bark scales of pear trees. When the weather warms up in the spring, the overwintered adults become active, climb up to the tree branches, and inhabit on fruit twigs to lay eggs. This study was conducted to develop a forecasting model for the onset of upward-movement of overwintered C. pyricola adults to control them by timely spraying of petroleum oil. The adult population densities were observed under rough barks (B) and on fruit twigs (T) of pear trees. Relative upward-movement rates (R) were calculated as T/(B+T). Low threshold temperatures for the activation of overwintered C. pyricola adults were selected arbitrarily from 5 to $9^{\circ}C$ at a $1^{\circ}C$ interval. Then, the days (D) when daily maximum air temperatures were above each low threshold temperature were counted from 1 February until to the dates with R $\geq$ 0.8. The same methods were applied for the prediction of the first observation of eggs. The variation of coefficients (CV) for the mean Des were lowest with the low threshold temperature of $6^{\circ}C$. At this selected threshold temperature, the upward movement of C. pyricola adults occurred with 12 D and they started laying eggs with 25 D. In the field validation, the model outputs with the $6^{\circ}C$ threshold temperature reasonably well explained the observed data in Suwon and Cheonan in 2002. Practical usages of the model were also discussed.