• The Korean Journal of Food And Nutrition
• /
• v.19 no.3
• /
• pp.279-287
• /
• 2006

This study was carried out to investigate the influences of modified starches on suppression of retrogradation in Korean rice cake for their optimization, Garaeduk. Based upon studying Avrami equation, the Avrami exponent n value of all the experiment samples was found to be 1.03 ${\sim}$ 1.37 in the influence of modified starches on retrogradation of the rice cake. This means that the retrogradation of the Korean rice cake occurred instantly after the crystallization of starch particles in the Korean rice cake formulated by modified starches. The highest Avrami exponent n value was indicated in the control sample. The rate constant k of retrogradation in the Korean rice cake formulated by modified starches showed comparatively low and appeared to be the lowest in the Korean rice cake formulated by SHPP. This tendency was shown well in the time constant(1/k) of retrogradation velocity. According to the DSC analysis, the onset temperature of gelatinization in thermal characteristics showed somewhat high in case of addition of modified starch into the Korean rice cake on storage time and the SHPP was slowly gone up. In peak temperature of gelatinization in thermal characteristics of the DSC analysis, SSOS and ASA were increased a little in comparison with the control. The control was comparatively high increase. Melting enthalphy of all samples added with modified starches (SSOS: 21.1${\rightarrow}$23.7${\rightarrow}$24.1, ASA: 21.1${\rightarrow}$24.8${\rightarrow}$25.4) appeared to be lower than that of the Korean rice cake without modified starches(21.2${\rightarrow}$26.1${\rightarrow}$27.1). The Korean rice cake added with SHPP was shown to be the lowest in the increasing rate of melting enthalpy(20.9${\rightarrow}$21.4${\rightarrow}$22.1). Heat spreadability of all the samples in Martin melting diameter was revealed to be good in order of control, ASA, SSOS, SHPP and especially the Korean rice cake added with SHPP was shown to be the best in heat spreadability. In color, sensory examination and textural characteristic of the Korean rice cake added with modified starches, the L$^*$value was not changed practically with the storage time and seemed to be stable. The a$^*$ value of the samples was followed by control(2.21${\rightarrow}$5.34: 141.6%), ASA (2.01${\rightarrow}$4.22: 110.0%), SSOS (2.78${\rightarrow}$4.87: 75.2%) and SHPP (2.12${\rightarrow}$3.40: 60.4%) in order of color change. Also the b$^*$ value of the samples was followed by control(4.32${\rightarrow}$6.35: 47.0%), ASA (4.66${\rightarrow}$5.73: 23.0%), SSOS (4.90${\rightarrow}$5.89: 20.2%) and SHPP (4.89${\rightarrow}$5.12: 4.7%) and there was the least (or no) color change with the SHPP. Textural characteristics of samples was shown to be the highest in case of modified starch addition and especially SHPP appeared to be the best in texture.

• Journal of KIISE:Databases
• /
• v.31 no.5
• /
• pp.492-504
• /
• 2004

Recently, as growing of interest for LBS(location-based services) techniques, lots of works on moving objects that continuously change their information over time, have been performed briskly. Also, researches for NN(nearest neighbor) query which has often been used in LBS, are progressed variously However, the results of conventional NN Query processing techniques may be invalidated as the query and data objects move. Therefore, they are usually meaningless in moving object management system such as LBS. To solve these problems, in this paper we propose a new nearest neighbor query processing technique, called CTNN, which is possible to meet accurate and continuous query processing for moving objects. Our techniques include an Approximate CTNN(ACTNN) technique, which has quick response time, and an Exact CTNN(ECTNN) technique, which makes it possible to search nearest neighbor objects accurately. In order to evaluate the proposed techniques, we experimented with various datasets. Experimental results showed that the ECTNN technique has high accuracy, but has a little low performance for response time. Also the ACTNN technique has low accuracy comparing with the ECTNN, but has quick response time The proposed techniques can be applied to navigation system, traffic control system, distribution information system, etc., and specially are most suitable when both data and query are moving objects and when we already know their trajectory.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.278-290
• /
• 2016

The purpose of this study is to investigate the association of total cholesterol levels (TC) and the incidence of hypercholesterolemia in response to changes in BMI. The subjects included a total of 28,249 industrial workers (25,548 male and 2,701 female) aged 30-69 years old who had received regular medical check-ups at least once per year from 2002 to 2012 (over 11 years). Data from this period were categorized into a first term (2002-2005), middle term (2006-2009), and last term (2010-2012). Then, the average TC was stratified by BMI, which was obtained from the initial examination results of each individual. In addition, average changes in TC were analyzed by stratifying with changes in BMI over 10 years (starting in 2002). The annual occurrence rates of hypercholesterolemia stratified by BMI were further assessed in patients with normal ranges of TC. In all three terms, the average TC was significantly elevated in the obese group ($25.0kg/m^2$) compared to the low weight group ($18.5kg/m^2$) and the normal weight group ($18.5-25.0kg/m^2$). Similarly, the group with higher BMI presented elevated rates of hypercholesterolemia compared to the groups with low BMI. In addition, increased BMI over the 10 year period significantly influenced TC. Consequently, it is suggested that evaluation and intervention for obesity control may be needed in order to manage the risk of high serum lipid levels.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.105-105
• /
• 2009

$ZrO_2$ is one of the most attractive high dielectric constant (high-k) materials. As integrated circuit device dimensions continue to be scaled down, high-k materials have been studied more to resolve the problems for replacing the EY31conventional $SiO_2$. $ZrO_2$ has many favorable properties as a high dielectric constant (k= 20~25), wide band gap (5~7 eV) as well as a close thermal expansion coefficient with Si that results in good thermal stability of the $ZrO_2/Si$ structure. In order to get fine-line patterns, plasma etching has been studied more in the fabrication of ultra large-scale integrated circuits. The relation between the etch characteristics of high-k dielectric materials and plasma properties is required to be studied more to match standard processing procedure with low damaged removal process. Due to the easy control of ion energy and flux, low ownership and simple structure of the inductively coupled plasma (ICP), we chose it for high-density plasma in our study. And the $BCl_3$ included in the gas due to the effective extraction of oxygen in the form of $BCl_xO_y$ compound In this study, the surface kinetic properties of $ZrO_2$ thin film was investigated in function of Ch addition to $BCl_3/Ar$ gas mixture ratio, RF power and DC-bias power based on substrate temperature. The figure 1 showed the etch rate of $ZrO_2$ thin film as function of gas mixing ratio of $Cl_2/BCl_3/Ar$ dependent on temperature. The chemical state of film was investigated using x-ray photoelectron spectroscopy (XPS). The characteristics of the plasma were estimated using optical emission spectroscopy (OES). Auger electron spectroscopy (AES) was used for elemental analysis of etched surface.

• Food Science and Preservation
• /
• v.6 no.2
• /
• pp.137-142
• /
• 1999

Physicochemical properties were evaluated for stored garlic bulbs during 9 months under different conditions, such as low-temperature condition (3${\pm}$1$^{\circ}C$, 80${\pm}$5% RH, LT), pit-temperature condition (9${\pm}$6$^{\circ}C$, 80${\pm}$5% RH,PT) and ambient-temperature condition (14${\pm}$11$^{\circ}C$, 67${\pm}$5% RH, AT). The internal sprout development was more significant in pit and ambient conditions than in low temperature and thus certain means for sprout control is required for long-term storage of garlic bulbs under such conditions. The rates of rotting and weight loss were appreciable especially after 7 months of storage (next March) in the order of PT, AT and LT, when external sprouts were observed in PT and AT. Moisture content of stored samples were relatively constant in LT until next May, but that in W and AT was significantly reduced after next January. Total sugars showed a decreasing tendency with the prolonged period, whereas an apparent increase was found in the contents of reducing sugar and vitamin C along with external sprouting of garlic bulbs from the 7th month of storage (next March). Based on the results that around March is a limiting point in garlic storage at such conditions from the physiological and physicochemical points of view, improved storage condition should be applied to overcome the storage barrier.

• Journal of the Korea Concrete Institute
• /
• v.16 no.3 s.81
• /
• pp.407-414
• /
• 2004

The purpose of this study is to evaluate the ability to resist chloride ions penetration of the concrete structure under marine environment in south-east asia especially. In this study, high strength concrete(HSC) with various combination of ordinary portland cement(OPC), blast-furnace slag(SG) and silica fume(SF) are cured 23 and $35^{\circ}C$ considering the site weather, and are cured in water for 3, 7 or 56 days respectively. And to investigate the fundamental properties and the resistance of chloride penetration of various HSC, setting time, slump flow, compressive strength, void and ASTM C 1202 test were conducted. Test results show that the compressive strength of HSC is similar regardless of SG replacement ratio and total charge passed of chloride is the smallest at 40% replacement of SG. The compressive strength of G4FS HSC is, besides, outstandingly high at early age compare with other HSC, but the compressive strength of G4F HSC, which is vary according to curing temperature and condition, most high at the age after 7 days. Total passed charge of HSC get larger in the order G4FS

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.7
• /
• pp.934-941
• /
• 2008

Effect of electron beam irradiation (1 and 2 kGy) on apricot was determined in order to develop preservation techniques to enhance shelf-life during 2 weeks at room temperature. Aerobic bacteria and molds/yeasts in apricot were reduced significantly with the increase of irradiation dose. Hardness of apricots decreased during storage by irradiation. Hunter's color value results showed that lightness and redness of irradiated samples were low compared with control samples. Also, sensory test resulting overall acceptability was not significantly different by 1 kGy irradiation during the storage days. Reducing sugar contents was increased gradually, and value of irradiated samples was high compared with non-irradiated sample. Organic acid contents of 2 kGy irradiated samples was not significantly changed during storage. In pH, total sugar, hydrogen donating activity and vitamin C contents, there were no significant differences between treatments. The electron beam treatment on apricots at 1 and 2 kGy did not affect pH, total sugar, hydrogen donating activity and vitamin C contents but improved microbial safety.

• Korean Journal of Organic Agriculture
• /
• v.24 no.4
• /
• pp.919-929
• /
• 2016

This study investigated the effect of organic materials (Bordeaux, Loess-sulfur) and the removal of apical shoot against downy mildew disease on cucumber cultivated in greenhouse. Five kinds of Bordeaux were made by adjusting mixing ratio of lime and copper sulfate in order to elucidate the optimal combination. The 4-6type Bordeaux was selected as the most effective combination for controlling cucumber downy mildew. Loess-sulfur showed inhibitory activity against cucumber downey mildew, but it was less effective than Bordeaux. It was confirmed that apical shoot cutting could reduce the incidence of cucumber downy mildew disease by 56.3%. When apical shoots of susceptible cucumber variety were cut at different leaf stages, disease incidence by early apical shoot cutting treatment was lower than that of late apical shoot cutting treatment. However in a resistant variety, 'Heukryungsamcheok', disease incidences of all cucumber apical shoot cutting treatments were lower than that of non-cutting treatment, but there was no differences between apical shoot cutting treatments due to low disease incidences. In addition, when organic materials and apical shoot cutting treatment were carried out in parallel, the combined treatments of organic materials and apical shoot cutting showed low disease incidence of cucumber downy mildew compared to untreated control. The lowest disease incidence of cucumber downy mildew was recorded in the combined treatment of 4-6type Bordeaux and apical shoot cutting. This study confirmed that apical shoot cutting can reduce the disease incidence of cucumber downy mildew and the combined treatment of apical shoot cutting and organic materials showed higher suppressive effect against cucumber downy mildew.

• Economic and Environmental Geology
• /
• v.29 no.2
• /
• pp.215-225
• /
• 1996

All the radionuclides in high-level nuclear waste will decay to harmless levels eventually but for some radionuclides decay is so slow that their radiation remains dangerous for times on the order of tens or hundreds of thousands of years. At the present time, the most favorite disposal plan for high-level radioactive waste is a mined geological disposal in which canister enclosing stable solid form of radioactive waste is placed in mined cavities locating hundred meters below the surface. The chief hazard in such disposal is dissolution of radionuclides from the waste in the groundwater that will eventually carry the dissolved radionuclides to surface environments. The hazard from possible escape of the radionuclides through groundwater can be delayed by engineered and geologic barriers. The engineered barriers can become useless by unexpected geologic catastrophe such as volcanism, earthquake, and tectonic movement and by fraudulent work such as careless construction, improperly welded canisters within the first few decades or centuries. As a result, dangerously radioactive waste which is still intensively radioactive is directly exposed to attack by moving groundwater. All the more, it is almost impossible to control repositories for times more than 10,000 years. Therefore, naturally controlled geologic, barriers whose properties will not be changed within 10,000 years are important to guarantee the safety of repositories of high-level radioactive waste. In Sweden and France, the suitability of granite for the mined geological disposal of high-level waste has been studied intensively. According to the research in Sweden and France, granites has the following physio-chemical characteristics which can delay the transportation of radionuclide by groundwater. First, the permeabilities of granites decreases as the depth increases and is $10^{-8}{\sim}10^{-12}m/s$ at depth below 300 m. Second, groundwater at depth below 300 m has pH=7-9 and reducing condition (Eh=-0.1~0.4). This geochemical condition is desirable to prevent both canister and solid waste from corrosion. Third most radionuclides are not transported by low solubilities and some radionuclide with high solubility such as Cs and Sr are retarded by absorption of geologic media through which ground water flows. Therefore, if high-level waste is disposed at depth below 300 m in the granite body which has a low permeability and is geologically stable more than 10,000 years, the safety of repositories from the hazard due to radionuclide escape can guaranteed for more than 10,000 years.

• Korean Journal of Environmental Biology
• /
• v.24 no.4
• /
• pp.372-379
• /
• 2006

In order to study temporal fluctuation and ecological characteristics of Noctiluca scintillans, its abundance was investigated in correlation with water temperature, salinity, precipitation, chlorophyll a concentration and copepods abundance in the coastal waters of Incheon from January 1999 to December 2000. N. scintillans was seasonally abundant during spring and autumn with temperature ranging from 10.3 to $21.5^{\circ}C$, but depleted in winter and summer. Low temperature below $4.5^{\circ}C$ in winter and low salinity due to high rainfall in summer led N. scintillans to disappear. A Cross Correlation Analysis (CCA) showed that chlorophyll a concentration was positively correlated with abundance of N. scintillans at the time lags of 10 days. This suggests that phytoplankton may be a contributing factor for increasing abundance of N. scintillans. During spring, eggs of Acartia hongi were found in 2.9 to 21.1% of individuals of N. scintillans. It was deduced that 1.2 to 49.5% of the eggs produced by A. hongi was preyed upon by N. scintillans. Therefore, N. scintillans may control the population size of initial developmental stage of A. hongi in the costal waters of Incheon.