• Journal of the Korean Burn Society
• /
• v.23 no.2
• /
• pp.54-59
• /
• 2020

Purpose: A fourth degree burn is a full-thickness burn of the skin usually accompanied by damage to deep structures and commonly results in extensive damage to surrounding tissues which makes the treatment of the wound difficult. Coverage of these wound using free flap is known to effective but not commonly used. The purpose of our study is to review our experience and suggest early application of free flap surgery. Methods: A retrospective review was performed from 2010 to 2019, on a total of 34 fourth degree burn patients undergone free flap surgery as primary treatment in our hospital. We reviewed the location of the injury, etiology, TBSA (%), Presence of osteomyelitis, flap choice, complications, period of injury to surgery and healing. Results: Using free flap as a primary reconstrcuction, the outcome is satisfactory. The treatment period was shortened, and there was less loss of function due to complications. Also the incidence of osteomyelitis and amputation was significantly low. Conclusion: Applying free flap surgery as soon as possible in fourth degree burns is effective, such as reducing complications such as infection, reducing amputation, shortening treatment period, and preventing severe sequelae.

• Animal Bioscience
• /
• v.35 no.12
• /
• pp.1871-1880
• /
• 2022

Objective: The primary goal was to identify the effectiveness of chemical or biological additives in delaying the deterioration of early-harvested wilted rye silage after exposure to air. Methods: Rye harvested as a whole plant at the early heading stage was wilted for 24 h. The wilted forage was divided into treatments including sodium diacetate (SDA) at 3 (SDA3) and 6 g/kg (SDA6), Lactobacillus plantarum (LP), L. buchneri (LB), or their equal mixture (LP+LB) at 1×10⁶ colony-forming unit/g fresh matter. Results: After 60 d of conservation in 20-L silos, lactic acid was greater in LP and LP+LB silages than other treatments (102 vs 90.2 g/kg dry matter [DM]). Acetic acid was greatest in SDA6 (32.0 g/kg DM) followed by LB (26.1 g/kg DM) and was lowest in LP treatment (4.73 g/kg DM). Silage pH was lower with microbial inoculation and the lowest and highest values were observed in LP and untreated silages, respectively. After 60 d, neutral detergent fiber concentration was lowest in SDA6 silages, resulting in the greatest in vitro DM digestibility (846 g/kg DM). Aerobic stability was longest in SDA6 (176 h) followed by LB treatment (134 h). Instability after aerobiosis was greatest in LP silages (68 h), about 8 h less than untreated silages. After aerobic exposure, yeast and mold numbers were lowest in SDA6 silages, resulting in DM loss minimization. Exhaustion of acetic acid and lactic acid after aerobic exposure was lowest with SDA6 but greatest with untreated and LP silages. Conclusion: Treatment of early-cut wilted rye forage with SDA at 6 g/kg resulted in silages with higher feeding value and fermentation quality, and substantially delayed deterioration after aerobic exposure, potentially qualifying SDA at this load for promotion of silage quality and delaying aerobic spoilage of early-harvested (low DM) rye forage.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.5
• /
• pp.712-720
• /
• 2022

In this study, we evaluated the production and photoreactivity of CDOM of two polar phytoplanktons - Phaeocystis antarctica and Phaeocystis pouchetii, in order to find out UV effects on phytoplanktons. In visible region, CDOM in media of both phytoplanktons under UV-R decreased during 48hrs incubation period. However, in UV region CDOM decreased 30 % in the media of P. antarctica, but increased 10% in media of P. pouchetii, compared to CDOM concentrations of control after 48 hr incubation. This result indicates that biota in polar environment would not well protected from UV-R harmful effect when P. antarctica is dominant because of loss of CDOM, but when P. pouchetii is dominant species, production of UV absorbing organic matter could play more efficiently for UV screening for marine biota. Also we confirmed that FDOM of humic substance (C-peak) produced by these phtoplanktons under UV-R stress were well matched with fluorescence characteristics of the UV-protecting compound, MAAs. This finding shows that Phaeocystis pouchetti with low photoreactivity would contribute to DOM pool of polar marine environment under stratification by global warming.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.1
• /
• pp.41-49
• /
• 2023

A convolutional neural network (CNN) is a representative algorithm for implementing artificial neural networks. CNNs have improved on the issues of rapid increase in calculation amount and low object classification rates, which are associated with a conventional multi-layered fully-connected neural network (FNN). However, because of the rapid development of IT devices, the maximum resolution of images captured by current smartphone and tablet cameras has reached 108 million pixels (MP). Specifically, a traditional CNN algorithm requires a significant cost and time to learn and process simple, high-resolution images. Therefore, this study proposes an improved CNN algorithm for implementing an object classification learning model for simple, high-resolution images. The proposed method alters the adjacency matrix value of the pooling layer's max pooling operation for the CNN algorithm to reduce the high-resolution image learning model's creation time. This study implemented a learning model capable of processing 4, 8, and 12 MP high-resolution images for each altered matrix value. The performance evaluation result showed that the creation time of the learning model implemented with the proposed algorithm decreased by 36.26% for 12 MP images. Compared to the conventional model, the proposed learning model's object recognition accuracy and loss rate were less than 1%, which is within the acceptable error range. Practical verification is necessary through future studies by implementing a learning model with more varied image types and a larger amount of image data than those used in this study.

• Journal of Mushroom
• /
• v.21 no.3
• /
• pp.179-184
• /
• 2023

The development of automated bottle cultivation systems has facilitated the large-scale production of Pleurotus ostreatus, a commonly cultivated oyster mushroom species in South Korea. However, as the consumption of this product is decreasing and production quantities are exceeding demand, farmers are seeking various other mushroom types and cultivars. In response to this, we have developed a new oyster mushroom cultivar named 'Sena'. This high-yielding cultivar has a white pileus and excellent quality. The white oyster mushroom cultivars 'Goni' and 'Miso' were selected as parental strains from the genetic resources of the National Institute of Horticultural and Herbal Science's Mushroom Division. By crossing their monokaryons, hybrids were developed and subjected to cultivation trials and characteristic evaluations to select the superior cultivar. The optimal temperature for 'Sena' mycelial growth is 25-30℃, with inhibition occurring at temperatures above 30℃, whereas the temperature for mushroom growth is 14-18℃. The mushrooms grow in clusters, with the white pileus having a shallow funnel shape. Optimal mycelial growth occurs in malt extract agar medium. When cultivated in 1,100 cc bottles, the 'Sena' cultivar had 35 available individuals, surpassing the number 16 available from the control cultivar 'Goni'. The yield per bottle also increased by approximately 157 g, a 24% increase over the control cultivar amount. When 300 g samples of harvested mushrooms were packed and stored at 4℃ in a cold storage facility for 28 days, the weight loss rate of 'Sena' was approximately 4.22%, lower than that of 'Goni'. Moreover, the changes in pileus and stipe whiteness (measuring 6.99 and 8.33, respectively) were also lower than those of the control cultivar. Since the appearance of a white cap is crucial for quality assessment, the 'Sena' cultivar is superior to the 'Goni' cultivar in terms of both weight and quality after undergoing low-temperature storage.

• Journal of the Society of Disaster Information
• /
• v.19 no.3
• /
• pp.532-544
• /
• 2023

Purpose: To identify and evaluate the risk of chemical fire causative substances by using thermal analysis methods (DSC, TGA) for the hazards and physical property changes that occur when newly used biofuels are mixed with existing fuels It is to use it for identification and evaluation of the cause of fire by securing data related to the method and the hazards of the material according to it. Method: The research method used in this experiment is the differential scanning calorimeter (DSC: Difference in heat flux) through quantitative information on the caloric change from the location, shape, number, and area of peaks. flux) was measured, and the weight change caused by decomposition heat at a specific temperature was continuously measured by performing thermogravimetric analyzer (TGA: Thermo- gravimetric Analyzer). Result: First, in the heat flux graph, the boiling point of the material and the intrinsic characteristic value of the material or the energy required for decomposition can be checked. Second, as the content of biodiesel increased, many peaks were identified. Third, it was confirmed through analysis that substances with low expected boiling points were contained. Conclusion: It was shown that the physical risk of the material can be evaluated by using the risk of biodiesel, which is currently used as a new energy source, through various physical and chemical analysis techniques (DSC + TGA).In addition, it is expected that the comparison of differences between test methods and the accumulation and utilization of know-how on experiments in this study will be helpful in future studies on physical properties of hazardous materials and risk assessment of materials.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.5
• /
• pp.83-91
• /
• 2006

Recently, the intensive rainstorm possibly induced by global warming plays a key role on the instability of railway adjacent slopes. The instability of slopes results as covering and loss of railway lines induced by slided soil mass. According to the site investigation on the failed slopes triggered by rainfall, low types of slope failure were observed: shallow, intermediate, gully erosion, and soil-rock interface failures. The observation reveals the different characteristics of slope failure depending on the thickness of soil layer, morphological features of slope, etc. Based upon the observations, flume tests were conducted to analyze the sliding mechanism of each failure. The variables of flume test are soil layer thickness, rainfall intensity, and morphology of slope under the constant condition of the percentage of fine, initial soil moisture content, slope angle and compaction energy. Test results show that shallow failure was mostly observed from the surface of the slope and caused by the soil erosion; in addition, compared to the other types of failure, the occurrence of initial erosion is late, however, the development of erosion is fast. In gully erosion failure, the collected water from the water catchment area helps erosion of the upper soil layer and transfer of residual corestone, which impedes the erosion process once the upper soil layers are eroded and corestone are exposed. The soil-rock interface failure shows the most fast initial erosion process among the failure types. Interestingly, the common feature observed from the different types of failure was the occurrence of the initial deformation near the toe of slopes which implies the existence of surbsurface flow along the downslope direction.

• Journal of Environmental Science International
• /
• v.31 no.11
• /
• pp.911-922
• /
• 2022

To restore reclaimed land, it needs to be supplemented with organic matter; this is especially true for Korea, where organic matter constitutes only one-tenth of conventional agricultural soils. The giant Miscanthus, a perennial grass known for its extensive biomass, shows signs of being an excellent source of organic matter for restoring reclaimed land. Therefore, the objectives of this study were to (i) evaluate the feasibility of using the giant miscanthus as an organic resource within the context of re-using reclaimed land for agricultural purposes (i.e., potato cultivation), and (ii) determine the optimum fertilization rate for the potatoes while the giant miscanthus is being used as an organic resource. Our results show that after 180 days, giant miscanthus lost 23-47% of its original dry weight, with the extent of the loss dependent on soil salinity. Nutrient concentrations (Mg2+, Na+) continued to increase until the end of the study period. In contrast, potassium (K+) and the ratio of carbon to nitrogen (C/N) decreased until the end of the study period. Specifically, after 180 days, low salinity topsoil treatments had the lowest C/N ratio. In the first year, 150 % of standard N rates were required for the potatoes to achieve maximum productivity; however in the 2nd year, standard rates were sufficient to achieve maximum productivity. Overall, this implies that even though the application of giant miscanthus did eventually improve soil quality, increasing crop yields, N fertilization is still necessary for the best outcomes.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.2
• /
• pp.119-126
• /
• 2023

Due to the COVID-19 phenomenon, more than one-third of SMEs in Korea have been working from home. Therefore, we tried to find out the management status of SMEs and find policy support. The survey data was based on the Bank of Korea's corporate management analysis 2021 data. As a result of the study, the debt of SMEs increased from 362 trillion won(2019) to 409 trillion won(2022), while their capital decreased from 489 trillion won(2019) to 336 trillion won(2022). Net profit and loss increased to 14.9 trillion won(2019) and 23.3 trillion won(2021). As a result of the company's financial soundness analysis, First, for stability, the current ratio was high compared to the total industry and the dependence on borrowings was high. Second, profitability improved from 3.20%(2019) to 4.28%(2021), but it was lower than 5.01%(2021) for all industries. Third, the growth rate showed an increase of 12.43%, which is 1.57 times faster than the total asset growth rate of 7.94%(2021) for all industries. As for the growth rate of sales, all industries(2021) showed (-)growth, while SMEs among manufacturing industries showed a growth rate of 14.78%. Fourth, as for activity, the total asset turnover ratio was higher at 0.96% compared to 0.73 for all industries. In conclusion, stability and profitability were low and growth potential was high compared to all industries. In the future, policies that focus on industries with high growth potential are needed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4D
• /
• pp.635-647
• /
• 2006

Korean construction companies first advanced to the international markets in 1960's and so far have brought more than 4,900 projects which account for 193 billion dollars approximately. With the large increase of national employment and income being followed by the achievement, Korea's construction industry has made an enormous contribution to the improvement of domestic economy for the last 40 years. However, recently the increased risk in international markets as well as the sharpening competition with foreign companies promising in terms of advanced technologies and low labor cost have been driving Korean construction away from the market shares. According to ENR (Engineering News Record, 1994~2003), it is revealed that 15.1% of top 225 global contractors are suffering from loss in international construction markets. This phenomenon is largely due to the highly uncertain characteristics of international projects, which are inherently exposed to various and complicated risky situations. Furthermore, especially for Korean construction companies, it is often the case that the failure in an international construction project cannot be offset by even a sufficient number of successful domestic achievements. Therefore, not only the selective screening among the nominated projects which have strong possibility of collapse but the systematic strategies for controlling potential risk factors are also considered indispensable in international construction portfolio management. The purpose of this study is to first analyze the causal relationships of the profit-influencing variables and the project success, and develop the profitability forecasting model in international construction projects.