• Title/Summary/Keyword: low-loss

Search Result 5,088, Processing Time 0.034 seconds

Thermal Behavior of (Co0.5 Mn0.5)Fe2O4 for Hydrogen Generation by Thermochemical Cycle (열화학 사이클 H2 제조를 위한 (Co0.5 Mn0.5)Fe2O4의 열적 거동)

  • Shin, H.C.;Choi, S.C.;Kim, C.S.;Kim, J.W.;Joo, O.S.;Jung, K.D.
    • Transactions of the Korean hydrogen and new energy society
    • /
    • v.13 no.2
    • /
    • pp.143-150
    • /
    • 2002
  • The thermal behavior of $(Co_{0.5}\;Mn_{0.5})Fe_2O_4$ prepared by a co-precipitation wasinvestigated for Hz generation by the thermochemical cycle. The reduction reaction of $(Co_{0.5}\;Mn_{0.5})Fe_2O_4$ started from $480^{\circ}C$, and the weight loss was 1.6 wt% up to $1100^{\circ}C$. At this reaction, $(Co_{0.5}\;Mn_{0.5})Fe_2O_4$ was reduced by release of oxygen bonded with the $Fe^{3+}$ ion in the B site of ($CO_{0.5}$ $(Co_{0.5}\;Mn_{0.5})Fe_2O_4$. In the $H_2O$ decomposition reaction, $H_2$ was generated by oxidationof reduced $(Co_{0.5}\;Mn_{0.5})Fe_2O_4$. The crystal structure of $(Co_{0.5}\;Mn_{0.5})Fe_2O_4$ for reduction reaction maintained spinel structure and the lattice constant of $(Co_{0.5}\;Mn_{0.5})Fe_2O_4$ ($8.41\AA$) was enlarged to $8.45\AA$. But the lattice constant of $(Co_{0.5}\;Mn_{0.5})Fe_2O_4$ after $H_2O$ decomposition reaction did not change to $8.45\AA$. Then, $(Co_{0.5}\;Mn_{0.5})Fe_2O_4$ is excellent material in the thermochemical cyclic reaction due to release oxygen at low temperature for the reduction reaction and produce $H_2$ maintaining crystal structure for redox reaction.

Quality Properties of Yellow Layer Cake Prepared with Diacylglycerol Oil (다이아실글리세롤 오일을 첨가한 옐로우 레이어 케이크의 품질특성)

  • Moon, Sung-Lan;Jang, Myung-Sook
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.37 no.6
    • /
    • pp.775-783
    • /
    • 2008
  • This study was performed to research quality characteristics of yellow layer cakes added with diacylglycerol oil and their effectiveness in reducing trans fatty acids and inhibiting accumulation of fats in the body. The diacylglycerol oil used in this study contained 80% diacylglycerol. In treatments 0, 10, 20, 30 and 40% of the weight of margarine were substituted with diacylglycerol oil. pH and specific gravity of cake batter of treatments increased with more diacylglycerol oil compared to that of the control group. Viscosity of cake batters of treatments also became higher with increasing diacylglycerol oil than that of the control. pH of cakes rose up with increasing amounts of diacylglycerol oil. Volume of cakes became bigger by reducing loss due to water evaporation in a baking process, resulting in a moister texture because of increased moisturizing capacity in oil. In the case of color, the Hunter's colorimetric lightness (L) got higher as the added amount was increased, and redness (a), yellowness (b) and color different ($\Delta$E) got lower against control accordingly. In particular, 30% treatment showed higher levels in the areas of volumes and moisture contents while 20 and 30% treatments were superior in sensory characteristics. Therefore, a yellow layer cake made by substituting 30% of the weight of margarine with diacylglycerol oil was expected to be a low-calorie cake because the oil improves taste and quality of cakes, reduces trans-fatty acids and inhibits accumulation of fats.

A Study of Investment effectiveness about Equity Linked Securities(ELS) ; focused on Step-down type ELS (주가연계증권(ELS)의 투자효과에 관한 연구 : 스텝다운형 ELS를 중심으로)

  • Jung, Heeseog;Kim, Sunje
    • Journal of Service Research and Studies
    • /
    • v.8 no.1
    • /
    • pp.103-122
    • /
    • 2018
  • The purpose of this study is to present the direction of ELS investment by analyzing the actual investment return of the ELS commodities and analyzing the investment effect of ELS that investors have felt unsatisfactory at financial marketing service. The research method is based on the step-down type ELS. We calculated the probability of achieving early redemption condition and maturity repayment condition, early redemption estimated yield, and maturity repayment estimated yield. As the study result, the probability of achieving 100% of the early redemption condition was 74.5%, and the probability of the early redemption condition 95% was 83.0%, 90% was 89.5%, 85% was 92.5%, and 80% was 96.5% respectively. In the case of the lowest 75%, the probability of holding to maturity is analyzed to be 2.5%, and the probability of early redemption is high. The probability of the stock price growth within 65% of the maturity repayment condition was 98.5% and the probability of the stock price growth within 60%~45% of the maturity repayment condition was 100%. 65% of maturity repayment condition was analyzed as 1.5% risk of principal loss, and the probability of achieving the committed yield of maturity was high. As a key measure of ELS investment, it is advantageous to select a commodity with a low rate of maturity repayment and a high rate of early redemption.

Preparation and Properties of Aromatic Polybenzoxazoles with high char yields (높은 char 수득률를 갖는 방향족 polybenzoxazoles의 제조 및 특성)

  • Sohn, Jun-Youn;Moon, Sung-Chul;Yoon, Doo-Soo;Choi, Jae-Kon
    • Elastomers and Composites
    • /
    • v.42 no.4
    • /
    • pp.238-248
    • /
    • 2007
  • A series of polyhydroxyamides(PHAs) having ether linkages in the polymer backbone were prepared via solution polycondensation at low temperature. These polymers were studied by FT-IR, $^1H-NMR$, DSC, TGA and PCFC. The PHAs exhibited inherent viscosities in the range of $0.5{\sim}1.1dL/g\;at\;35^{\circ}C$ in DMAc solution. Most of PHAs except PHA 3 were soluble in polar organic solvents such as N,N-dimethylacetamide(DMAc), N-methyl-2-pyrrolidone(NMP), and N,N-dimethylform-amide(DMF). Subsequent thermal treatment of PHAs afforded polybenzoxazols(PBOs). However, the PBOs were insoluble in a variety of solvents. Most of the PBOs except PBO 3 showed glass-transition temperature($T_g$) in the range of $200{\sim}246^{\circ}C$ by DSC and maximum weight loss temperature in the range of $597{\sim}697^{\circ}C$ in nitrogen by TGA. PBOs showed high char yields in the range of $51{\sim}64%$. PCFC results of the PBOs showed the heat release(HR) capacity, $8{\sim}65J/gK$ and total heat release(total HR), $2.4{\sim}4.7kJ/g$.

The Chilling Injury Development and Quality Characteristics of 'Ooishiwase' Plums (Prunus salicina L.) according to Ripening Stages and Cold Storage Temperature (자두 '대석조생'의 숙기 및 저온저장 온도에 따른 저온장해과 발생 및 품질특성)

  • Cho, Mi-Ae;Hong, Yoon-Pyo;Choi, Sun-Young;Jung, Dae-Sung;Lim, Byung-Sun;Park, Soo-Jeong;Lee, Seung-Koo
    • Food Science and Preservation
    • /
    • v.18 no.5
    • /
    • pp.651-660
    • /
    • 2011
  • This study was conducted to evaluate the quality characteristics of and chilling injury development in 'Ooishiwase' plum fruits after harvest, according to the ripening stage and storage temperature. The fruits were harvested at three ripening stages (60, 80, and >90% skin color) and were then stored at 1, 4, 5, 6, and $20^{\circ}C$ cold-storage rooms for up to 48 days. The fruit quality parameters, respiration patterns, and chilling injury development were monitored during the storage periods and the three days of subsequent ripening at $20^{\circ}C$. The fruits harvested at the 60%-skin-color stage maintained the flesh firmness, color, weight loss, and TA, and their respiration rates and ethylene production were decreased compared with the 80%-or >90%-skin-color fruits, at a lower storage temperature. The major symptoms of chilling injuries in the Ooishiwase plums were gel breakdown, flesh browning, and flesh translucency. These symptoms appeared at all the low-storage-temperature and ripening treatment stages. When the fruits, however, were harvested at a more immature stage and were stored at a lower storage temperature, the chilling injury development decreased. These results show that the development of chilling injury in Ooishiwase plums is related to the climacteric behavior during cold storage.

Synthesis and Anti-corrosion Properties of Succinic Acid Alkyl Half-amide Derivatives (숙신산 알킬 하프-아마이드 유도체의 합성 및 해수에 대한 방청성능)

  • Baek, Seung-Yeob;Kim, Young-Wun;Chung, Keun-Wo;Yoo, Seung-Hyun;Kim, Nam-Kyun
    • Clean Technology
    • /
    • v.17 no.4
    • /
    • pp.314-324
    • /
    • 2011
  • Several amide derivatives have been used as additives for base oil of metal working fluids and pressure working oils. In this paper, a series of succinic acid alkyl half-amide derivatives were synthesized as over 97% yields by ring-opening reaction of succinic anhydride and several amines and were soluble in 100 N base oil within 1 wt% concentration. The structures of the synthesized amides were confirmed by $^1H$-NMR, FT-IR spectrum and GC analysis. Anti-corrosion properties of the amides in sea water were evaluated through ASTM D665 method and weight loss method. As the results of anti-corrosion properties, the properties of the amides with shorter alkyl chain and high concentration showed better performance than those with longer alkyl chain and low concentration. Also, the dialkyl amides showed better anti-corrosion properties than those of the monoalkyl amides. Inhibition efficiency% (IE%) was over 93% in the concentration of 40 ppm and corrosion rate (CR) was below 0.5 mm/year in the same concentration.

Light Scattering Properties of Highly Textured Ag/Al:Si Bilayer Back Reflectors (표면텍스처링된 이중구조 Ag/Al:Si 후면반사막의 광산란 특성)

  • Jang, Eun-Seok;Baek, Sang-Hun;Jang, Byung-Yeol;Park, Sang-Hyun;Yoon, Kyung-Hoon;Rhee, Young-Woo;Cho, Jun-Sik
    • Korean Journal of Materials Research
    • /
    • v.21 no.10
    • /
    • pp.573-579
    • /
    • 2011
  • Highly textured Ag, Al and Al:Si back reflectors for flexible n-i-p silicon thin-film solar cells were prepared on 100-${\mu}m$-thick stainless steel substrates by DC magnetron sputtering and the influence of their surface textures on the light-scattering properties were investigated. The surface texture of the metal back reflectors was influenced by the increased grain size and by the bimodal distribution that arose due to the abnormal grain growth at elevated deposition temperatures. This can be explained by the structure zone model (SZM). With an increase in the deposition temperatures from room temperature to $500^{\circ}C$, the surface roughness of the Al:Si films increased from 11 nm to 95 nm, whereas that of the pure Ag films increased from 6 nm to 47 nm at the same deposition temperature. Although Al:Si back reflectors with larger surface feature dimensions than pure Ag can be fabricated at lower deposition temperatures due to the lower melting point and the Si impurity drag effect, they show poor total and diffuse reflectance, resulting from the low reflectivity and reflection loss on the textured surface. For a further improvement of the light-trapping efficiency in solar cells, a new type of back reflector consisting of Ag/Al:Si bilayer is suggested. The surface morphology and reflectance of this reflector are closely dependent on the Al:Si bottom layer and the Ag top layer. The relationship between the surface topography and the light-scattering properties of the bilayer back reflectors is also reported in this paper.

Quality Properties of Semi-dried Persimmons with Various Drying Methods and Ripeness Degree (다양한 건조방법과 감의 성숙도에 따른 반건시 품질특성)

  • 정경미;송인규;조두현;추연대
    • Food Science and Preservation
    • /
    • v.11 no.2
    • /
    • pp.189-194
    • /
    • 2004
  • This experiment was carried out to compare the quality of semi-dried persimmon according to various drying methods and ripeness degree of persimmons. Most of persimmons were dried naturally there were much opportunities of contamination by impurities, microorganism and discoloration. There were need for developing various drying methods and knowing proper mature degree of persimmons in order to enhance the quality of semi-dried persimmons. Drying time of semi-dried persimmons by hot-air, far infrared ray and dehumid drying could be shorten approximately 11∼12 days, comparing with natural drying. And the loss ratio of natural drying and artifical drying were 7.0% and 0.0%. The moisture content of natural drying and dehumid drying were simillar and the hardness were very low in comparing other drying methods. Average pannel scores in semi-dried persimmons after drying showed that dehumid drying and natural drying were excellent in total prefernce ; 3.9 and 3.4, respectively. Unriped persimmons showed lower moisture content, color values and higher hardness than riped and overriped persimmons. The total preference of riped and overriped fruit were superior than unriped fruit.

Effects of Glycemic Index for Boiled White Rice and Boiled White Rice Mixed with Grains on Food Consumption and Satiety Rate (백미밥과 잡곡밥의 당지수 차이가 열량 섭취량 및 포만감에 미치는 영향)

  • Jung, Eun-Young;Suh, Hyung-Joo;Hong, Yang-Hee;Lee, In-Yi;Kim, Dong-Geon;Kim, Mi-Ok;Chang, Un-Jae
    • Journal of the Korean Dietetic Association
    • /
    • v.15 no.2
    • /
    • pp.179-187
    • /
    • 2009
  • In this study, we examined whether the glycemic index (GI) values of boiled white rice (GI=86) and boiled white rice mixed with grains (GI=58) could influence the total energy intake and satiety rate of a rice-based diet. Thirty adult females participated in this study, in which they ate boiled white rice, or boiled white rice mixed with grains, along with side dishes for lunch, and then ate the same white rice diet for dinner in the lab once a week for 2 weeks. There was no significant difference in the visual analogue scales for taste between the two diets. Although there were no differences between the subjects' energy intakes for side dishes, the total energy consumed from the boiled white rice mixed with grains diet (520.5 kcal) was significantly (p<0.001) lower than that consumed from the boiled white rice diet (560.2 kcal). For dinner, the subjects consumed significantly (p<0.001) lower calories when they had eaten the boiled white rice mixed with grains diet for lunch as compared to the boiled white rice diet. In addition, the subjects reported significantly (p<0.01, p<0.001) higher satiety rates after consuming the boiled white rice mixed with grains diet compared to the boiled white rice diet, despite consuming lower calories. In conclusion, these results indicate that consuming low GI rice such as boiled white rice mixed with grains substituted for boiled white rice, may be a useful strategy for weight loss and weight management since individuals will consume less energy without experiencing a reduction in satiety.

  • PDF

Physical and Mechanical Properties of Heat-treated Domestic Cedar (삼나무 열처리재의 물리 및 역학적 특성)

  • Kim, Kwang-Mo;Park, Jung-Hwan;Park, Byoung-Soo;Son, Dong-Won;Park, Joo-Saeng;Kim, Wun-Sub;Kim, Byoung-Nam;Shim, Sang-Ro
    • Journal of the Korean Wood Science and Technology
    • /
    • v.37 no.4
    • /
    • pp.330-339
    • /
    • 2009
  • The material properties of Cedar (Cryptomeria japonica) were evaluated according to heat treatment conditions. The special focus was made on the color control of cedar wood by heat treatment. The difference of color between sapwood and heartwood could be reduced by heat treatment at a temperature above $170^{\circ}C$. Long heating time was more effective in reducing the difference. The Equilibrium Moisture Content (EMC) of heat-treated wood was as low as 50 percent. The result obviously indicates that heat-treated wood is more dimensionally stable in the change of moisture condition than the control. The heat-treated wood was also effective in increasing the durability against wood rotting fungi. However, more study is required to develop heat treatment as an environmentally-friendly technology for wood preservation without chemical. The mechanical properties of heat-treated wood showed relatively higher performance than the control in general. Meanwhile the dramatic decrease in impact bending stress due to the loss of ductility may limit uses of heat-treated wood in certain cases. There were no significant changes in microscopic structure which may cause changes in mechanical properties. Further study on the chemical analysis of heat-treated wood is needed to scrutinize the causes of changes of material properties.