• 전자공학회논문지
• /
• 제50권12호
• /
• pp.287-291
• /
• 2013

광섬유 격자소자(FBG)를 이용한 광섬유 수중 음향센서는 기존의 광섬유 센서가 지니고 있는 우수한 장점들을 지니고 있을 뿐만 아니라, PZT센서가 검출할 수 없는 저주파수(30Hz~300Hz)특성에서도 우수한 신호 감지효과를 지니고 있다. 실험에서 $1{\times}3$ 광 커플러 보다, 최근 개발된 hopper lenz WDM을 사용하여, 최대 19KHz까지 고감도 음파신호를 검출하고, 우수한 신호압축율과 초저주파수의 신호검출가능성을 보임에 따라, 정교한 신호해석과 군사용으로 사용될 수 있는 초저주파 신호 검출에 실용화를 기대 할 수 있으며, 센서 어레이(array)를 통하여 고감도 다중화로 발전될 수 있다.

• 대한의용생체공학회:의공학회지
• /
• 제17권4호
• /
• pp.507-514
• /
• 1996

The automated ECG diagnostic systems in hospital have a low P-wave detection capacity in case of some diseases like conduction block. The purpose of this study is to improve the P-wave detection ca- pacity using wavelet transform. The first procedure is to remove baseline drift by subtracting the median filtered signal from the original signal. The second procedure is to cancel ECG's QRS-T complex from median filtered signal to get P-wave candidate. Before we subtracted the templete from QRS-T complex, we estimated the best matching between templete and QRS-T complex to minimize the error. Then, wavelet transform was applied to confirm P-wave. In particular, haiti wavelet was used to magnify P-wave that consisted of low frequency components and to reject high frequency noise of QRS-T complex cancelled signal. Finally, p-wave was discriminated and confirmed by threshold value. By using this method, We can got the around 95.1% P-wave detection. It was compared with contextual information.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1995년도 추계학술대회
• /
• pp.109-112
• /
• 1995

This paper is a study on the detection of the significant point in ECG signal. ECG signal consists of two components; one is high frequency component to be detected and the other is low frequency component to be removed. AR model is appropriate for modelling and removing the low frequency component. AR model coefficients are updated by artificial neural network algorithm. We can remove the background noise(low frequency) by passing through the AR filter. The remaining signals which include high frequency noise are sent to the matched filter to pass only the signal which we want to extract. The template used in matched filter is updated adaptively.

• 대한임베디드공학회논문지
• /
• 제13권6호
• /
• pp.289-296
• /
• 2018

Drone detection in FMCW radar system needs complex techniques because a drone beat frequency is highly dynamic and unpredictable. Therefore, the current static signal processing algorithms cannot show appropriate detection accuracy. With dynamic signal fluctuation and environmental clutters, it can fail to detect a drone or make false detection. It affects to the radar system integrity and safety. Constant false alarm rate (CFAR), one of famous static signal process algorithm is effective for static environment. But for drone detection, it shows low detection accuracy. In this paper, we suggest neural network based FMCW radar system for detecting a drone. We use recurrent neural network (RNN) because it is the effective neural network for signal processing. In our FMCW radar system, one transmitter emits FMCW signal and four-way fixed receivers detect reflected drone beat frequency. The coordinate of the drone can be calculated with four receivers information by triangulation. Therefore, RNN only learns and inferences reflected drone beat frequency. It helps higher learning and detection accuracy. With several drone flight experiments, RNN shows false detection rate and detection accuracy as 21.1% and 96.4%, respectively.

• 한국전기전자재료학회논문지
• /
• 제21권2호
• /
• pp.182-187
• /
• 2008

This paper dealt with the detection algorithm of series arcing, which is a cause of electric fires in low-voltage wiring systems. To find the distinguished electrical features of series arc, we simulated series arcing by the arc generator specified in UL1699. An electric heater, an inverter-controlled vacuum cleaner, and a phase-controlled incandescent lamp were used as loads to generate series arcing. A high-pass filter (HPF) with the low cut-off frequency of 3 kHz at -3 dB was fabricated and applied to separate the series arc signal from the AC voltage source. The experiment showed that the high frequency signal generates randomly during series arcing, and the phase-controlled incandescent lamp produces high frequency pulses even in normal state. In this case, the magnitude, the width, and the randomness of high frequency signal should be analyzed to estimate series arcing precisely.

• 대한전자공학회논문지TC
• /
• 제42권4호
• /
• pp.1-6
• /
• 2005

본 논문에서는 송신기와 수신기의 구현에 있어서 많은 장점을 제공하는 직접 확산-주파수(DSSS-FSK) 변조를 제안한다. 주파수 변조를 사용하여, 직접 확산 통신에서도 주파수합성기(PLL)를 이용한 송신기의 구현이 가능하므로 저전력, 저가격이 가능하다. 또한, 반송과 인접 대역에 정보를 전송하지 않아서 직접변환방식 수신기(DCR)의 구현을 용이하게 한다 한편, DSSS-FSK 신호를 위한 최적 동기 검파와 반동기 상관 검파 구조를 제안하고 그 성능을 분석한다. 매우 큰 반송파 주파수오프셋에서도 우수한 비트오율성능을 가지기 위해서, 분할 반동기 상관 검파 구조를 제안하고 성능을 분석한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.776-779
• /
• 2004

A RF front-end module is designed for GIS(Gas Insulated Substation) which is employed for effective and efficient very high voltage transmission. Major advantage of the unit is improved PO detection sensitivity through minimizing the effect of surrounding interference signals, which is achieved by controlling the gain and the selection of the frequency band, for the precise detection of any UHF PO (Partial Discharge) disturbance occurred in the GIS due to some unwanted problems. For the development of the module, various switches for providing selected signal paths, wideband LNA, 3 BPF for selecting detection frequency band, and video detector are designed, fabricated and measured on 1 mm FR4 substrate with various RF components. The detection sensitivity of the unit was <-60 dBm that is sufficient to detect UHF PO signals as low as 1 pC. It is believed that the value is enough to detect the signal occurred in GIS.

• 한국전자파학회논문지
• /
• 제29권10호
• /
• pp.783-790
• /
• 2018

주파수 도약(frequency hopping) 기법은 대역확산(spread spectrum) 방법 중 하나로, 광대역 상에서 반송파의 주파수가 고정되어 있지 않고, 다양한 주파수 채널로 도약하는 통신방식이다. 이러한 특성으로 인해 뛰어난 항재밍 성능, 낮은 탐지율 등의 장점을 가지고 있어, 군 통신에 자주 사용되고 있으며, 상용 통신에도 종종 사용되고 있다. 바꿔 말하면, 이런 주파수 도약 신호를 잘 탐지해내는 것은 매우 어려우며 중요한 연구분야 중 하나이다. 본 논문에서는 FFT를 이용한 신호 탐지를 할 때, 주파수 도약 신호의 탐지율을 증가시킬 수 있는 기법을 제안한다. 수신한 신호를 FFT를 이용하여 주파수 성분으로 변환시킬 경우, 스펙트럼 누설(spectral leakage)이 발생하여 탐지율이 낮아진다. 이때, 해밍 윈도우(hamming window)를 이용하여 문제를 해결하고 탐지율을 증가시킬 수 있는데, 주파수가 도약하는 환경에서는 윈도우가 오히려 성능 저하를 가져오기도 한다. 제안하는 기법은 주파수 변화에 대응하여 이러한 약점을 해결하였으며, 기존에 비해 최대 13 % 정도의 탐지율 향상을 얻을 수 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.225-229
• /
• 2008

This paper describes a series arc detection algorithm in a low-voltage wiring system. We designed and fabricated an arc detection circuit which consists of a high-pass filter with the low cut-off frequency of 3 kHz to attenuate power frequency. The series arcing phenomena was simulated by an arc generator specified in UL1699. In the experiment, various loads such as resistive loads, resistive loads controlled by a dimmer, and vacuum cleaners were used. Whether the signal is arc or noise is discriminated by pulse counts and periodicity of the detected signal.

• 센서학회지
• /
• 제21권3호
• /
• pp.204-210
• /
• 2012

In this paper, signal detection and control circuits for hemispherical resonator gyroscope(HRG) are designed, simulated and tested. HRG is one of the coriolis vibratory gyroscope(CVG) which has very stable quartz hemispherical resonator and shows very precise performance. HRG signals are usually modulated at the several kHz of resonant frequency. So the general control scheme cannot be applied directly because general control schemes mainly focused at low frequency range. Using demodulated and modulated PI control scheme with the signal detection which is presented in this paper, performance of manufactured HRG has tested.