• Journal of Environmental Impact Assessment
• /
• v.28 no.5
• /
• pp.492-506
• /
• 2019

Heavy metal contaminants in the shooting range are mostly present in a warhead circle or a metal fragment present as a particle, these fine metal particles are weathered for a long period of time is very likely that the surface is present as an oxide or carbon oxide. In particular, lead which is a representative contaminant in the shooting range soil, is present as more fine particles because it increases the softness and is stretched well. Therefore, by physical washing experiment, we conducted a degree analysis, concentration of heavy metals by cubic diameter, composition analysis of metallic substances, and assessment of applicability of gravity, magnetism and floating selection. The experimental results FESEM analysis and the measurement results lead to the micro-balance was confirmed thatthe weight goes outless than the soil ofthe same size in a thinly sliced and side-shaped structure according to the dull characteristics it was confirmed that the high specific gravity applicability. In addition, the remediation efficiency evaluation results using a hydrocyclone applied to this showed a cumulative remediation efficiency of 71%,twice 80%, 3 times 91%. On the other hand, magnetic sifting showed a low efficiency of 17%,floating selection -35mesh (0.5mm)target soil showed a relatively high efficiency to 39% -10mesh (2mm) efficiency was only 16%. The target treatment diameter of soil washing should be 2mm to 0.075mm, which is applied to the actual equipment by adding an additional input classification, which would require management as additional installation costs and processes are constructed. As a result, it is found that the soilremediation of shooting range can be separately according to the size of the warhead. The size is larger than the gravel diameter to most 5.56mm, so it is possible to select a specific gravity using a high gravity. However, the contaminants present in the metal fragments were found to be processed by separating using a hydrocyclone of the soil washing according to the weight is less than the soil of the same particle size in a thinly fragmented structure.

• Journal of Nutrition and Health
• /
• v.54 no.3
• /
• pp.292-304
• /
• 2021

Purpose: This study investigated the association between the mothers' use of home meal replacement (HMR) in their children's meals and the diet quality of their young children. Methods: Three hundred and thirty-seven mothers with five-year-old kindergartners in Sejong city participated in the survey from June to July 2020. The questionnaire consisted of the status of HMR use in children's meals and questions for assessing the nutrition quotient for preschoolers (NQ-P). The subjects were classified into three groups according to the frequency of HMR use in children's meals: using HMR more than three times a week (high-frequency group; [HG], n = 65), one-two times a week (moderate-frequency group; [MG], n = 145), and less than once a week (low-frequency group; [LG], n = 130). Results: The mothers' mean age was 38.3 years. The average monthly cost of purchasing HMRs was highest at 200,000-300,000 won in HG, 50,000-100,000 won in MG, and less than 50,000 won in LG (p < 0.001). The consumption frequency of processed meats, fast foods, processed beverages, and sweet & fatty snacks was significantly higher in the HG group than the other groups. The mean NQ-P score was 60.5 in HG, 63.0 in MG, and 64.5 in LG, showing a significant difference (p < 0.01). In the sub-score according to the three areas, there were no significant differences in balance and environment among the three groups. In the moderation area, however, the score was 44.1 in HG, 51.3 in MG, and 57.5 in LG Group, showing a significant difference (p < 0.001). Conclusion: The increase in HMR use was related to the decreased diet quality in the overall and moderation areas of children's diet. These results support the importance of nutrition education for mothers, which aims to reduce their children's access and exposure to processed foods, such as HMR.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.38 no.4
• /
• pp.101-110
• /
• 2020

This study was conducted through the analysis of literature and on-site research as a case study of 14 artists' gardens with traditional themes presented at the garden fair. With Focusing on the design process for determining traditional reproduction, the following characteristics and implications were derived by analyzing the design goals, selection of subjects for traditional reenactment, determination of methods for reproduction, and design stages of landscape components. First, the pattern of selecting traditional structures as subjects for reproduction in many artist gardens can be understood as an advantage of being suitable for narrow sites and having remarkable topic communicability. They directly delivered the design intent by adding the names of traditional structures such as Madang, Wool, Buttumak, Jangdokdae, Chuibyeong and Seokgasan. Works expressed indirectly, such as Wall, Korean Garden, Suwon, and Seoul craftsmen, have relatively weak topic communicability. There were also symbolic representations of objects to be reproduced, such as Seonbi, marginal spaces, and Pung-lyu. Second, while reproducing Hanok Madang, separate the gardens paved with grass and stone, the fortress wall of Suwon Hwaseong and the northwest Gongsimdon of the watchtower. Also the garden with a miniature version of the extraneous Yong-yeon and the garden, which was reproduced as a low decorative wall in the rest area based on Nakan-Eupseong Fortress, shows the need for a deep understanding of tradition. On the other hand, the reproducting works of choosing the location of the traditional garden, the Korean Garden showed the importance of systematic arrangement with the surrounding environment, the beauty of the space in the courtyard of Hanok, the beauty of the slowness enjoyed by the scholars and the reenactments of the Pung-lyu culture of Moonlight boating are not only imitating traditional structures but also spreading understanding of tradition to garden culture and sentiment. Third, there were many works that reconstructed the real-size traditional structure in a straightforward way in relation to design. The garden was divided into Chuibyeong and the living space was decorated with Buttumak, chimneys, and gardens, and facilities representing Gyeongbokgung Palace, Soswaewon, and Seoseokji were systemically arranged. However it recognized the importance of selecting the key design elements, constructing the elevation of the structure, and the sense of scale of the space from works that reproduced the large Suwon Hwaseong and Nakan-Eupseong in an abstract way. While there are examples gardens of Hanok yards and Bazawul, which are far from the original image among the gardens that chose the dismantling method, the Blank-space garden expressed only by a frame composed of cubes, and Seonbi's Sarangbang garden, that permeated the moonlight with many traditional structures are the positive examples. The Seoul Artisan Garden, Jikji Simche Garden and Pung-lyu Garden, which display modernly designed landscape components, need an explanation to understand the author's intention.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.3
• /
• pp.13-29
• /
• 2021

The purpose of this study was to analyze the spatial distribution and location factors of startups by generation (young and middle-aged) in Seoul. To this end, a research model was established that included factors of industry, population, and startup institutions by generation in 424 administrative districts using the Seoul Business Enterprise Survey(2018), which includes data on the age group of entrepreneurs. As an analysis method, descriptive statistics were conducted to confirm the frequency, average and standard deviation of startups by generation and major variables in the administrative districts of Seoul, and spatial distribution and characteristics of startups by generation were analyzed through global and local spatial autocorrelation analysis. In particular, the spatial distribution of startups in Seoul was confirmed in-depth by categorizing and analyzing startups by major industries. Afterwards, an appropriate spatial regression analysis model was selected through the Lagrange test, and based on this, the location factors affecting startups by generation were analyzed. The main results derived from the research results are as follows. First, there was a significant difference in the spatial distribution of young and middle-aged startups. The young people started to startups in the belt-shaped area that connects Seocho·Gangnam-Yongsan-Mapo-Gangseo, while middle-aged people were relatively active in the southeastern region represented by Seocho, Gangnam, Songpa, and Gangdong. Second, startups by generation in Seoul showed various spatial distributions according to the type of business. In the knowledge high-tech industries(ICT, professional services) in common, Seocho, Gangnam, Mapo, Guro, and Geumcheon were the centers, and the manufacturing industry was focused on existing clusters. On the other hand, in the case of the life service industry, young people were active in startups near universities and cultural centers, while middle-aged people were concentrated on new towns. Third, there was a difference in factors that influenced the startup location of each generation in Seoul. For young people, high-tech industries, universities, cultural capital, and densely populated areas were significant factors for startup, and for middle-aged people, professional service areas, low average age, and the level of concentration of start-up support institutions had a significant influence on startup. Also, these location factors had different influences for each industry. The implications suggested through the study are as follows. First, it is necessary to support systematic startups considering the characteristics of each region, industry, and generation in Seoul. As there are significant differences in startup regions and industries by generation, it is necessary to strengthen a customized startup support system that takes into account these regional and industrial characteristics. Second, in terms of research methods, a follow-up study is needed that comprehensively considers culture and finance at the large districts(Gu) level through data accumulation.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.1
• /
• pp.206-219
• /
• 2021

The warming of the climate is increasing the damage caused by termites to wooden buildings, cultural properties and houses. A group removal system can be installed around the building to detect and remove termite damage; however, if the site is not visited regularly, every one to two months, you cannot observe whether termites have spread within, and it is difficult to take prompt effective action. In addition, since the system is installed and operated in an exposed state for a long period of time, it may be ineffective or damaged, resulting in a loss of function. Furthermore if the system is installed near a cultural site, it may affect the aesthetic environment of the site. In this study, we created a detection system that uses wood, cellulose, magnets, and magnetic sensors to determine whether termites have entered the area. The data was then transferred to a low power LoRa Network which displayed the results without the necessity of visiting the site. The wood was made in the shape of a pile, and holes were made from the top to the bottom to make it easier for termites to enter and produce a cellulose sample. The cellulose sample was made in a cylindrical shape with a magnet wrapped in cellulose and inserted into the top of a hole in the wood. Then, the upper part of the wood pile was covered with a stopper to prevent foreign matter from entering. It also served to block external factors such as light and rainfall, and to create an environment where termites could add cellulose samples. When the cellulose was added by the termites, a space was created around the magnet, causing the magnet to either fall or tilt. The magnetic sensor inside the stopper was fixed on the top of the cellulose sample and measured the change in the distance between the magnet and the sensor according to the movement of the magnet. In outdoor experiments, 11 cellulose samples were inserted into the wood detection system and the termite inflow was confirmed through the movement of the magnet without visiting the site within 5 to 17 days. When making further improvements to the function and operation of the system it in the future, it is possible to confirm that termites have invaded without visiting the site. Then it is also possible to reduce damage and fruiting due to product exposure, and which would improve the condition and appearance of cultural properties.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.78-99
• /
• 2020

The Buddha triad and 16 Arhat statues carved on the rock surface at Seongbulsa temple is the only domestic remaining example of all 16 Arhats, so its academic value is very high. However, it is severely damaged and so required a stability evaluation through study of digital documentation and precise diagnosis for the purpose of comprehensive conservation. This process established that the Buddha statues were of similar scale, while the Arhats showed a wide variety of sizes, and the two kith and kin in the volume were larger than the Arhats. It was estimated that the statues of food for Buddha are similar to the Arhat statues, and most of the statues are well-formed. The rock used to carve the Buddha statues is banded gneiss with distinct foliation, alternating between white bands of quartz and feldspar and black bands composed of biotite. The Buddha statues have been damaged by physical weathering, discoloration, and biological contamination. In damage evaluations, joint (3.6 crack index), peeling (5.2%), exfoliation (1.7%), and falling off (0.1%) were observed on the rock surface of the Buddha statues. In particular, due to severe biological weathering, stage 9 and 10 biological coverage of the rock surface accounted for 57.5% of the total area, and stages 5 to 8 also accounted for a high share at 22.3%. The discoloration factors were shown to be dark brown and white with Fe, Ca, and S, and a large amount of C detected in the blackened contaminants, and the damage weight high in all areas. Discontinuities in different directions were identified in the rock surface. Analysis of potential rock failure types indicated that there is a possibility of plane and toppling failure, but wedge failure is unlikely to occur. The mean ultrasonic velocity of the main rock surface was 2,463m/sec, the lower part of the left side with a large number of joints was relatively low, and the highly weathered (HW) type to the completely weathered (CW) type concentrated distribution, showing weak properties. For the Buddha statues, conservation treatment is required for about 14.9% of micro cracks and 58.9% of exfoliation cracks. In addition, in order to improve the conservation environment of the Buddha statues, maintenance of drainage and ground preparations for the rock surface gradient and plants are necessary, and protection facilities should be reviewed for long-term conservation and management purposes.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.100-117
• /
• 2020

National Treasure no. 101, the stupa of State Preceptor Jigwang from the Beopcheonsa Temple Site in Wonju has been transferred from place to place and reassembled several times since it was built. In particular, overall dismantling and repair was carried out in 1957 to restore parts damaged by bombing during the Korean War. Documented information on the repair process and materials used at that time does not exist. However, various types of metal materials used for this stupa have been identified during conservation work. Besides clamps anchor bolts, 9mm-thick circular rebars were mainly used for joining the parts of this stupa, while circular rebars and wires of various thicknesses were used for joining the parts with mortar restoration materials. Although deformed bars are typically used for stone pagodas classified as architectural structures, smooth circular rebars were used in this case. In terms of restoration using mortar, material shapes were transformed, bound alternately, and twisted irregularly to improve bonding strength and coherence in order to insert restoration materials and to bolster structural weaknesses. In addition, metallographic analysis showed the material to be hypo-eutectoid steel with low carbon content. Many non-metallic inclusions in the shape of drops of different sizes were included, which do not affect the whole elemental composition due to the very small quantities involved. Qualitative and EPMA analysis of Mn and S, which were not identified by SEM-EDS area analysis, established an even distribution of MnS in crystal grains of the microstructure, regardless of the shape of the samples. It is presumed that secondary homogenization and softening might have been conducted after manufacturing to facilitate the working process. Furthermore, in consideration of properties indicating that the thinner the steel is, the less carbon content contained and the greater the elasticity and elongation, it is judged that restoration work was ordered.

• Journal of Bio-Environment Control
• /
• v.30 no.1
• /
• pp.1-9
• /
• 2021

This study was conducted to examine the changes of photosynthesis, growth, chlorophyll contents and functional material contents in light intensity and EC concentration of wild baby leaf vegetable, Indian lettuce (Lactuca indica L. cv. 'Sunhyang') in DFT hydroponics. The cultivation environment was 25±1℃ of temperature and 60±5% of relative humidity in growth system. At 14 days after sowing, combination effect of light intensity (Photosynthetic Photon Flux Density (PPFD 100, 250, 500 µmol·m-2·s-1) and EC level (EC 0.8, 1.4, 2.0 dS·m-1) of nutrient solution was determined at the baby leaf stage. The photosynthesis rate, stomatal conductance, transpiration rate and water use efficiency of Indian lettuce increased as the light intensity increased. The photosynthesis rate and water use efficiency were highest in PPFD 500-EC 1.4 and PPFD 500-EC 2.0 treatment. The chlorophyll content decreased as the light intensity increased, but chlorophyll a/b ratio increased. Leaf water content and specific leaf area decreased as light intensity increased and a negative correlation (p < 0.001) was recognized. Plant height was the longest in PPFD 100-EC 0.8 and leaf number, fresh weight and dry weight were the highest in PPFD 500-EC 2.0. Anthocyanin and total phenolic compounds were the highest in PPFD 500-EC 1.4 and 2.0 treatment, and antioxidant scavenging ability (DPPH) was high in PPFD 250 and 500 treatments. Considering the growth and functional material contents, the proper light intensity and EC level for hydroponic cultivation of Indian lettuce is PPFD 500-EC 2.0, and PPFD 100 and 250, which are low light conditions, EC 0.8 is suitable for growth.

• Journal of Mushroom
• /
• v.18 no.4
• /
• pp.357-364
• /
• 2020

The grade and price of Lentinula edodes largely differs in preference depending on the product area and seasonal factors. The product amount of autumn L. edodes was higher than that of spring L. edodes, but high quality, which is divided into "Hwago" is low in preference. Mostly, the autumn L. edodes is obtained as powder; hence, it is necessary to develop a processing method to utilize its flavor and aroma at an affordable price. Additionally, we estimated the content of 𝛽-glucan, ergosterol, vitamin D₂, reducing sugars, and free amino acids and evaluated the anti-inflammatory activity of saccharification powder of log-cultivated L. edodes. In the saccharification powders obtained via 7 min of UV irradiation of log-cultivated L. edodes, 𝛽-glucan and vitamin D₂ contents were found to be the highest, whereas ergosterol content was found to be the lowest. The content of reducing sugars ranged from 62.4 mg/L to 68.2 mg/L. The free amino acids were higher in these saccharification powders than in the control. Subsequently, RAW 264.7 cells were treated with different concentrations (10, 50, 100, 200, 300, and 500 ㎍/mL) of the saccharification powders of log-cultivated L. edodes obtained via different UV irradiation time applications. The cells showed good viability; the anti-inflammatory effect was found to be the highest at 7 min UV irradiation. Therefore, 7 min of UV irradiation was determined to be the optimum condition for manufacturing saccharification powders of log-cultivated L. edodes. Hence, saccharification powders of log-cultivated L. edodes may be used as a raw material for natural sweeteners, food additives, and in the food industry.

• Korean Journal of Mineralogy and Petrology
• /
• v.33 no.4
• /
• pp.307-324
• /
• 2020

Major and trace elements, and Sr, Nd, isotopic composition analysis have been carried out on the Miocene basalt (Huangsongpu basalt, 20 Ma) 25 km to northeast from the Mt. Baekdu. The basalt has Na2O+K2O=3.5~4.7 wt.%, and MgO=9.9~11.1 wt.%, containing Mg-rich olivine (Mg#=75~86), clinopyroxene (Mg#=72~85) and Ca-rich plagioclase micro-phenocrysts. These data suggest that the basalt belongs to the alkaline magma series with a primitive nature, crystallized at a near-liquidus. The basalt is also characterized by high Cr (394~479 ppm) and Ni (389~519 ppm) contents, Nb-Ta enrichment anomalies and OIB-like trace elements patterns, displaying identical signatures to those of typical intraplate magmas. The rare earth element (REE) patterns of the basalt and high (Gd/Yb)sample/(Gd/Yb)PM ratio (=2.8~3.5) suggest the parental magma was derived from relatively low-degree (3~5%) partial melting of garnet peridotite. The 143Nd/144Nd and 87Sr/86Sr composition of the basalt are higher than those of BSE. The high 87Sr/86Sr (= ~0.7058) ratio of the basalt indicates a contribution of recycled ancient oceanic crust or continental crust on the Pacific slab suggesting that the Huangsongpu basalt was generated from metasomatized mantle.