• Journal of Environmental Science International
• /
• v.17 no.12
• /
• pp.1403-1411
• /
• 2008

Wangdol-cho, located 23 km offshore of Hupo in southwest of East Sea, is underwater rock floor, called to Wangdol-Am or Wangdol-Jam and has three tops as Mat-Jam, Middle-Jam and Set-Jam. The composition, abundance, diversity and community structure were investigated in winter and summer in 2002 around Wangdol-cho. The temperature around the Northwest and Southeast part of Wangdol-cho was influenced by the North Korea Cold Current (NKCC) and East Korea Warm Current (EKWC), respectively. Nutrient and chlorophyll-a concentration were higher at the top of Wangdol-cho than other area. A total of 41 genera and 78 species of phytoplankton were identified. The average cell abundance of phytoplankton in winter and summer were $286{\times}10^3\;cells/m^3,\;432{\times}10^3\;cells/m^3$ respectively. The largest community was Bacillariophyta containing 52 taxa. The dominant species were Lauderia anulata and Coscinodiscus spp. which preferred cold water in winter. In contrast, warm water species such as Rhizosolenia stolterfothii and Ceratium spp. were dominant in summer. The average species diversity index of phytoplankton in winter was higher than that in summer. According to dominant species and standing crops, phytoplankton community resulted in a clear separation. One group was western area, which showed low density, and the other was eastern area, which showed the higher density. The abundance and species composition of phytoplankton. were affected by topological characteristics around Wangdol-cho.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.46 no.2
• /
• pp.126-138
• /
• 2010

To investigate seasonal variation of fisheries resources composition and their correlationships with environmental factors in the coastal ecosystem of the middle Yellow Sea of Korea, shrimp beam trawl were carried out for the fisheries survey. Fisheries resources of 81 species, 57 families, and 6 taxa totally were collected by shrimp beam trawl in the middle coastal ecosystem of Yellow Sea of Korea. Species were included 6 species in Bivalvia, 6 in Cephalopoda, 22 in Crustacea, 2 in Echinodermata, 5 in Gastropoda, and 40 in Pisces. Diversity indices (Shannon index, H') showed seasonal variation with low value of 2.14 in winter, and high value of 2.67 in spring. Main dominant species were Oratosquilla oratoria, Octopus ocellatus, Acanthogobius lactipes, Cynoglossus joyneri, Rapana venosa venosa, Loligo beka, Chaeturichthys stigmatias, Raja kenojei, Microstomus achne and Paralichthys olivaceus, that were occupied over 58% of total individuals, and 55% of wet weight. Fisheries organism made four coordinative seasonal groups by the principal component analysis (PCA), showing stronger seasonal variation than spatial variation. PC from PCA showed statistically significant cross-correlationships with seawater temperature, $NH_4$-N, TP and chlorophyll a (P < 0.05).

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2232-2237
• /
• 2007

Steam reforming and catalytic reforming of $CH_4$ conversion to produce synthesis gas require both high temperatures and high pressure. Non-thermal plasma is considered to be a promising technology for the hydrogen rich gas production from methane. In this study, three phase AC GlidArc plasma system was employed to investigate the effects of gas composition, gas flow rate, catalyst reactor temperature and applied electric power on the $CH_4$ and $H_2$ yield and the product distribution. The studied system consisted of three electrode and it connected AC generate power system different voltages. In this study, air was used for the partial oxidation of methane. The results showed that increasing gas flow rate, catalyst reactor temperature, or electric power enhanced $CH_4$ conversion and $H_2$ concentration. The reference conditions were found at a $O_2$/C molar ratio of 0.45, a feed flow rate of 4.9 ${\ell}$/min, and input power of 1kW for the maximum conversions of $CH_4$ with a high selectivity of $H_2$ and a low reactor energy density.

• Journal of the Korean Ceramic Society
• /
• v.49 no.4
• /
• pp.337-341
• /
• 2012

Mechanochemical processing (MCP) involves several high-energy collisions of powder particles with the milling media and results in the increased reactivity/sinterability of powder. The present paper shows results of mechanochemical processing (MCP) of silicon nitride powder mixture with the relevant sintering additives. The effects of MCP were studied by structural changes of powder particles themselves as well as by the resulting sintering/densification ability. It has been found that MCP significantly enhances reactivity and sinterability of the resultant material: silicon nitride ceramics could be pressureless sintered at $1500^{\circ}C$. Nevertheless, a degree of a silicon nitride crystal lattice and powder particle destruction (amorphization) as detected by XRD studies, is limited by the specific threshold. If that value is crossed then particle's surface damage effects are prevailing thus severe evaporation overdominates mass transport at elevated temperature. It is discussed that the cross-solid interaction between particles of various chemical composition, triggered by many different factors during mechanochemical processing, including a short-range diffusion in silicon nitride particles after collisions with other types of particles plays more important role in enhanced reactivity of tested compositions than amorphization of the crystal lattice itself. Controlled deagglomeration of $Si_3N_4$ particles during the course of high-energy milling was also considered.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.7
• /
• pp.424-427
• /
• 2015

In this study, in order to develop the capacitor composition ceramics with the good dielectric properties, $(Ba_{0.86}Ca_{0.14})(Ti_{0.85}Zr_{0.12}Sn_{0.03})O_3+xCuO$ (x= 0.006~0.010) ceramics were prepared by the conventional solid-state reaction method. The effects of CuO addition on the microstructure and dielectric properties was investigated. All specimens indicated rhombohedral phase without any secondary phase. As CuO addition increased, the variation width of TCC was increased at more than $40^{\circ}C$. Also, the specimen with x=0.007 sintered at $1,250^{\circ}C$ showed the high dielectric constant of 9,632 in spite of low temperature sintering temperature.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.1
• /
• pp.31-34
• /
• 2007

In this study, in order to develop multilayer ceramics vibrator for ultrasonic nozzle, PMN-PNN-PZT ceramics were fabricated using $Li_{2}CO_{3}-Na_{2}_CO_{3}$ as sintering aids and their piezoelectric and dielectric characteristics were investigated according to the amount of PbO. With increasing PbO contents, secondary phases were increased and phase structure was changed from tetragonal structure to rhombohedral structure and also electromechanical coupling factor was linearly decreased. At the composition ceramics with the sintering temperature of $870^{\circ}C$ and 1 mol% excess PbO, density, electromechanical coupling factor, dielectric constant, piezoelectric d constant and mechanical quality factor showed the optimum value of $7.879\;g/cm^{3}$, 0.55, 1149, 328 pC/N, 1224, respectively for multilayer ceramics vibrator application for ultrasonic nozzle.

• Journal of the Korean Ceramic Society
• /
• v.32 no.4
• /
• pp.419-428
• /
• 1995

Polycrystalline silicon carbide (SiC) thick films were depostied by low pressure chemical vapor deposition (LPCVD) using CH3SiCl3 (MTS) and H2 gaseous mixture onto isotropic graphite substrate. Effects of deposition variables on the SiC film were investigated. Deposition rate had been found to be surface-reaction controlled below reactor temperature of 120$0^{\circ}C$ and mass-transport controlled over 125$0^{\circ}C$. Apparent activation energy value decreased below 120$0^{\circ}C$ and deposition rate decreased above 125$0^{\circ}C$ by depletion effect of the reactant gas in the direction of flow in a horizontal hot wall reactor. Microstructure of the as-deposited SiC films was strongly influenced by deposition temperature and position. Microstructural change occurred greater in the mass transport controlled region than surface reaction controlled region. The as-deposited SiC layers in this experiment showed stoichiometric composition and there were no polytype except for $\beta$-SiC. The preferred orientation plane of the polycrystalline SiC layers was (220) plane at a high reactant gas concentration in the mass transfer controlled region. As depletion effect of reactant concentration was increased, SiC films preferentially grow as (111) plane.

• Journal of Environmental Science International
• /
• v.9 no.5
• /
• pp.429-436
• /
• 2000

In order to study on the variational characteristics of water quality and chlorolphyll a concentration the water samples were collected daily or three times a week during the period from April 1990 to November 1991 at Kukdong port located in the northern Kamak bay of Southern Korea I made an analysis on biological factor as chlorophyll a concentration as well as physico-chemical factors such as water temperature salinity sigma-t dissolved oxygen, nutrients (ammonia, nitrite, nitrate, phosphate, and silicate) N/P ratio and chemical oxygen demand. In Northern Kamak bay seasonal variations in physical factors such as water temperature salinity and sigma-t were very marked. On the other hand chemical factors such as nutrients concentration and COD were not so. Chemical factors, in particular silicate were influenced by input of freshwater. And the roles of silicate on the seasonal succession of phytoplankton species composition was very low. Phytoplankton biomass as measured by chlorophyll a concentration was very high all the year round and it was controlled by the combination of several factors especially of N/P ratio determined by dissolved inorganic nitrogen.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.158.2-158.2
• /
• 2011

DME is acronym of dimethyl ether, which is spotlighted as an ideal fuel to produce hydrogen due to its high hydrogen/carbon ratio, high energy density and easiness to carry. In this research, we calculated thermodynamic hydrogen (or syngas) yield from DME autothermal reforming and compared to other fuels. The reforming efficiency was about 80% above $700^{\circ}C$. Lower OCR has higher reforming efficiency but, it requires additional heat supply since the reactions are endothermic. SCR has no significant effect on the reforming efficiency. The optimized condition is $700^{\circ}C$, SCR 1.5, OCR 0.45 without additional heat supply. Comparing to other commercial gaseous fuels (methane and propane), DME has higher selectivity of $H_2O$ and $CO_2$ than the others due to the oxygen atom in the molecule. To apply DME autothermal reforming to real system, a proper catalyst is required. Therefore, it is performed the experiment comparing various novel metal catalysts based on CGO. Experiments were performed at calculated condition. The composition of product was measured and reforming efficiency was calculated. The catalysts have similar efficiency at high temperature(${\sim}800^{\circ}C$) but, CGO-Ru has the highest efficiency at low temperature ($600^{\circ}C$).

• Journal of Powder Materials
• /
• v.11 no.6 s.47
• /
• pp.472-476
• /
• 2004

The Fe-Ni compact bodies were fabricated using Fe-Ni mixed powders with 50 nm in diameter by injection molding process. The relationship between microstructure and material properties was characterized with respect to the volume ratio of powder/binder and sintering temperature with SEM and TEM. In the compact body having the volume percent ratio of 45(Fe-Ni) : 55(binder), which was sintered at $900^{\circ}C$ the values of relative density and hardness were low about 97.7% and 277.1 Hv, respectively. Using the composition of 50(Fe Ni) : 50(binder) and sintered at $900^{\circ}C$, the values of relative density and hardness were 98.5%, 294.4 Hv, respec-tively. The grain size of sintered bodies strongly depended on the sintering temperature. In both samples sintered at $600^{\circ}C$ and $900^{\circ}C$, the average grain sizes were about 150 nm and 500 nm in diameter, respectively.