• 자원환경지질
• /
• 제21권2호
• /
• pp.131-137
• /
• 1988

Geological and electrical resistivity surveys were carried out to investigate subsurface geology and geologic structure of the Bonghwajae area in the Okchon zone. Pseudosections of the apparent electrical resistivity distribution along the three survey lines were obtained by using dipole-dipole electrode array method, and models of subsurface geology and geologic structure by using two dimensional finite difference method. The Bonghwajae fault zone exists around Bonghwajae area in the north-south direction, and is a boundary between Okchon Group and Choson Supper Group. Metabasite and hornblende gabbro intruded along the Bonghwajae fault zone remaining two fracture zones with low resistivity value of 20 ohm-m and widths of about 100m and 70-300m. They strike nearly N-S and dip westward with a high angle of $60-70^{\circ}$. Sochangri fault with a width of about 160m exists between Jisogori and Bonghwajae, by which Bonghwajae fault zone is displaced about 1km in the east-west direction. Hornblende gabbro whose electrical resistivity value is in the range of 5000-8000 ohm-m intruded the metabasite of 2000-4500 ohm-m after the Sochangri fault had formed. Great Limestone Group is widely distributed in the east of Bonghwajae fault zone, and interbeds so called Yongam formation of graphitic black slate with an extremely low electrical resistivity value of 2 ohm-m.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제5C권2호
• /
• pp.76-80
• /
• 2005

In this paper, a miniaturized ring hybrid circuit is characterized based on a thin film microstrip (TFMS) on low-resistivity silicon. In order to obtain low-loss characteristics, a polyimide layer with 50 $\mu$m thickness is spin-coated onto the silicon to be used for the substrate. First, propagation characteristics of TFMS lines consisting of the ring hybrid circuit are presented. Then, a ring hybrid circuit based on TFMS is featured by employing the triple concentric circle approach for miniaturization. Triple concentric circle lines with $\lambda$$_{g}$/4 or 3$\lambda$$_{g}$/4 line lengths are implemented on the surface of the polyimide by circularly meandering to reduce the circuit size of the designed ring hybrid. Good agreement between measured and simulated results is obtained.

• 지구물리와물리탐사
• /
• 제22권2호
• /
• pp.62-71
• /
• 2019

이 연구에서는 전기비저항 탐사와 자기지전류(magnetotellurics, MT) 탐사를 이용하여 미얀마 중앙분지에 대한 탐사를 수행하였다. 미얀마에서는 지하구조의 전기비저항 구조로 해석한 연구가 미흡하여 심부까지 전기비저항을 제공해 주는 대표적인 탐사를 활용하여 지하구조를 분석하였다. 연구지역 지질은 셰일층과 사암층으로 구성된 해성퇴적층으로 지하의 전기비저항 값이 낮을 것으로 예상되었다. 이 연구는 (주)지오룩스에서 자체 개발한 전기비저항 탐사 장비(SmartRho)와 Phoenix사의 MTU-5A를 사용하여 연구지역에 대한 전기비저항 구조를 영상화하였다. 전기비저항 탐사와 MT 탐사는 지하 100 m까지는 수십ohm-m 미만의 전기비저항 구조를 보였다. 특히 MT 탐사 자료에서는 1 Hz 까지 TM, TE 모드가 거의 유사한 양상을 보인다. MT 탐사 2차원 역산 결과 150 ohm-m 이하의 낮은 전기비저항 구조를 나타냈고, 동서방향으로 전기비저항 구조가 나뉘는 것을 확인할 수 있었다. MT 탐사를 전기비저항 탐사와 인접한 위치에서 수행한 결과, 2차원 역산 결과가 유사한 전기비저항 값을 나타내는 것을 확인하였다. 향후 미얀마 중앙분지의 전기비저항 구조 연구를 위해서는 높은 전기전도도를 고려하여 전기비저항 탐사와 MT 탐사를 동시 수행하는 것이 효과적일 것으로 생각된다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2006년도 공동학술대회 논문집
• /
• pp.79-82
• /
• 2006

This paper presents to examine the ability of an electrical resistivity method to monitor the grouting effect at subsidence area. To monitor the changes in ground resistivity before and during the grout, series of electrical resistivity monitoring surveys have been conducted. Data has acquired in the form of grid making nine lines parallel to road and four lines traverse the road. Two kinds of electrode arrays modify pole-pole and dipole-dipole arrays were used during resistivity data acquisition. In this paper, the results show that electrical prospecting is an effective method to detect low resistivity imaging zone by grout during the ground reinforcement.

• 지구물리
• /
• 제2권1호
• /
• pp.75-88
• /
• 1999

물리탐사의 최근 주된 관심 분야는 대상지역에 대한 각종 탐사자료를 복합적으로 해석하여 탐사대상의 지하구조를 3차원적으로 정확히 규명하는 작업이다. 이 연구에서는 연구 지역에 대한 1차원의 슐럼버져배열 전기비저항 수직탐사를 2차원 및 3차원적으로 확장·해석하기 위해 먼저 전기비저항 자료를 영상화한 뒤 이들을 서로 보간하여 전기비저항의 단면·입체도를 재건하였다. 파쇄대와 같은 전기비저항 불연속면은 재건된 단면·입체도에서 더욱 공간적으로 파악될 수 있었고 대상지역의 파쇄대와 관련된 것으로 보이는 저비저항대는 지역의 중앙부에서 화강암질 기반암 하부까지 확장된 것으로 나타난다. 선구조 부근의 탄성파속도는 약 3,000 m/s로서 주위에 비해 작게 나타나며 이를 축으로 풍화대의 깊이는 남동쪽이 북서쪽보다 상대적으로 큰 것으로 해석되었다. 초정지역에 대한 전기비저항, 탄성파속도, 방사능 등의 속성자료는 지리정보시스템 소프트웨어인 ARC/INFO를 이용하였고 복합해석도의 영상강화를 통해 나타난 주요 단열 및 파쇄대는 전기비저항과 탄성파속도가 모두 낮게 나타나는 대상지역의 남동부에 많이 발달한 것으로 보인다. 이에 반하여 방사능 자료는 전기비저항, 탄성파 속도와 비교할 때 지질경계면에서 잘 반응하지 못한 것으로 나타난다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 춘계학술대회 논문집
• /
• pp.57-60
• /
• 2008

A design criterion of grounding systems is commonly based on low frequency resistance in Korea. When lightning surges which have high frequency components are injected into the grounding system, the grounding impedance is greatly different from the static grounding resistance. This paper presents the grounding adimittance and phase on the frequency range from 100 [Hz] to 15 [MHz] using water tank simulating the grounding system in different water resistivities. As a result, capacitive effect is dominant over the frequency of 100 [kHz] at the water resistivity of 1,000 [$\Omega$ m]. On the other hand, the inductive characteristics appear at the low water resistivity. Consequently, dependence of grounding impedances on the frequency of injected current is strongly related to resistivity.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 춘계학술대회 논문집
• /
• pp.211-215
• /
• 1996

In this paper, the volume resistivity of transformer oil is made researches so that the electrical properties for transformer oil is investigated. The specimen is produced by the irradiation of electron beam classified into the low dose, such as 0.5[Mrad], 1[Mrad], 2[Mrad]. The effect of electron team irradiation is studied by investigating the electrical properties of dielectric liquid due to the difference of electron beam dose. To measure the physical properties of transformer oil, courier Transform-Infrared Spectroscopy is investigated. And the study far the electrical properties is made by measuring the volume resistivity of each specimen. By means of the result from this experiments, it is introduced that the movement of carrier to contribute to the volume resistivity on the electrical properties.

• 한국자기학회지
• /
• 제5권6호
• /
• pp.952-955
• /
• 1995

It is well kown that the side-jump effect, originated from the spin-orbit scatterring of the transport electrons at the site of spin-orbit scatterers, is the reason for the anomalus Hall resistivity which is proportional to the magnetization. Our recent magnetization study implied that abundant ferromagnetic Fe clusters made of for Fe ions dominate the temperature and field dependence of magnetization at high field and low temperature regime for a paramagnetic $Fe_{0.33}Zr_{0.67}$ alloy. We measured the Hall resistivity of this alloy and observed that the Hall resistivity followed the M-H cure at low temperature, and the Hall coefficients at moderate temperatures were proportional to the magnetic susceptibility. We explain the behavior of Hall resistivity with the change of field and temperature in terms of side-jump effect.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2007년도 공동학술대회 논문집
• /
• pp.241-244
• /
• 2007

Cement-grouts are injected into limestone cavities beneath the road in the project area, in order to improve strength and reduce permeability; the extent to which grout has penetrated in cavities need to be monitored in order to determined effectiveness of cement-grout. Geophysical approaches, offer great potential for monitoring the grout injection process in a fast and cost-effective way as well as showing whether the grout has successfully achieved the target. This paper presents the ability of surface electrical resistivity to investigate the verification of the grout placement. In order to image the cement-grout, time-lapse surface electrical resistivity surveys were conducted to compare electrical resistivity images before and after injection. Cement-grout was imaged as anomalies exhibiting low resistivity than the surrounding rocks. In accordance with field monitoring, laboratory study was also designed to monitor the resistivity changes of cement-grout specimens with time-lapse. Time-lapse laboratory measurements indicated that electrical methods are good tool to identify the grouted zone. Pre-and post grouting electrical images showed significant changes in subsurface resistivity at grouted zone. The study showed that electrical resistivity imaging technology can be a useful tool for detecting and evaluating changes in subsurface resistivity due to the injection of the grout.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.401-408
• /
• 2005

Recently shield TBM tunnellings are being applied to subway construction in Korean cities. Generally these kinds of tunnellings have the problems in the stability of ground such as subsidence because urban subway is constructed in the shallow depth. A sinkhole occurred on the road just above the tunnel during tunneling in Kwangju, so a survey for upper layer of the tunnel was needed. But conventional Ground Probing Radar can't be applicable due to the presence of steel-mesh screen in the shield segment, so no existent geophysical method is applicable in this site. Because the outer surface of each shield segment is electrically insulated, dipole-dipole resistivity method which is popular in engineering site investigation, was tried to this survey for the first time. Specially manufactured flexible ring-type electrodes were installed into the grouting holes at an interval of 2.4 m on the ceiling. The K-Ohm II system which has been developed by KIGAM and tested successfully in many sites, was used in this site. The system consists of 1000Volt-1Ampere constant-current transmitter, optically isolated 24 bit sigma-delta A/D conversion receiver - maximum 12 channel simultaneous measurements, and graphical automatic acquisition software for easy data quality check in real time. Borehole camera logging with circular white LED lighting was also done to investigate the state of the layer. Measured resistivity data lack of some stations due to failing opening lids of holes, shows general high-low trend well. The dipole-dipole resistivity inversion results discriminate (1) one approximately 4 meter diameter cavity (grouted but incompletely hardened, so low resistivity - less than $30{\Omega}m$), (2) weak zone (100-200${\Omega}m$), and (3) hard zone (high resistivity - more than 1000${\Omega}m$) very well for the distance of 320 meters. The 2-D inversion neglects slight absolute 3-D effect, but we can get satisfactory and useful information. Acquired resistivity section and video tapes by borehole camera logging will be reserved and reused if some problem occurs in this site in the future.