• 제목/요약/키워드: low power transmitter

검색결과 185건 처리시간 0.03초

공통모드 전압 보정기능을 갖는 LCD 드라이버용 듀얼모드 LVDS 전송회로 (Dual-Level LVDS Circuit with Common Mode Bias Compensation Technique for LCD Driver ICs)

  • 김두환;김기선;조경록
    • 한국콘텐츠학회논문지
    • /
    • 제6권3호
    • /
    • pp.38-45
    • /
    • 2006
  • 본 논문은 LCD driver IC의 전송선 당 데이터 전송률을 2배로 하기 위한 이중 저전압 차동신호 전송 (DLVDS) 회로를 제안한다. 제안된 회로에서는 2-비트 데이터를 하나의 송신기에서 입력 받고, 2-비트 데이터를 듀얼레벨을 갖는 차동신호로 전송한다. 따라서 기존의 저전압 차동신호 전송기법(LVDS)의 특징을 유지하면서 2-비트 데이터를 2개의 전송선을 통하여 전송할 수 있다. 제안된 송신기는 전류원 피드백 회로를 이용하여 출력의 공통모드 바이어스 흔들림을 보상했다. 그리하여 기존의 회로의 입력 바이어스와 기준 바이어스 전압 차이로 출력의 공통모드 바이어스 흔들림이 발생하는 문제가 해결되었다. 수신기에서는 디코드 회로를 통해 원래의 2-비트 입력 데이터를 복원할 수 있다. 제안된 회로는 $0.25{\mu}m$ CMOS 공정으로 설계하였고, 시뮬레이션 결과 1-Gbps/2-line의 전송률을 갖고, 2.5V의 전원에서 35-mW의 전력소모를 나타냈다.

  • PDF

Implementation of Bistatic Backscatter Wireless Communication System Using Ambient Wi-Fi Signals

  • Kim, Young-Han;Ahn, Hyun-Seok;Yoon, Changseok;Lim, Yongseok;Lim, Seung-ok;Yoon, Myung-Hyun
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제11권2호
    • /
    • pp.1250-1264
    • /
    • 2017
  • This paper presents the architecture design, implement, experimental validation of a bistatic backscatter wireless communication system in Wi-Fi network. The operating principle is to communicate a tag's data by detecting the power level of the power modulated Wi-Fi packets to be reflected or absorbed by backscatter tag, in interconnecting with Wi-Fi device and Wi-Fi AP. This system is able to provide the identification and sensor data of tag on the internet connectivity without requiring extra device for reading data, because this uses an existing Wi-Fi AP infrastructure. The backscatter tag consists of Wi-Fi energy harvesting part and a backscatter transmitter/a power-detecting receiver part. This tag can operate by harvesting and generating energy from Wi-Fi signal power. Wi-Fi device decodes information of the tag data by recognizing the power level of the backscattered Wi-Fi packets. Wi-Fi device receives the backscattered Wi-Fi packets and generates the tag's data pattern in the time-series of channel state information (CSI) values. We believe that this system can be achieved wireless connectivity for ultra- low-power IoT and wearable device.

Active control of amplitude and phase of high-power RF systems in EAST ICRF heating experiments

  • Guanghui Zhu;Lunan Liu;Yuzhou Mao;Xinjun Zhang;Yaoyao Guo;Lin Ai;Runhao Jiang;Chengming Qin;Wei Zhang;Hua Yang;Shuai Yuan;Lei Wang;Songqing Ju;Yongsheng Wang;Xuan Sun;Zhida Yang;Jinxin Wang;Yan Cheng;Hang Li;Jingting Luo
    • Nuclear Engineering and Technology
    • /
    • 제55권2호
    • /
    • pp.595-602
    • /
    • 2023
  • The EAST ICRF system operating space has been extended in power and phase control with a low-level RF system for the new double-strap antenna. Then the multi-step power and periodic phase scanning experiment were conducted in L-mode plasma, respectively. In the power scanning experiment, the stored energy, radiation power, plasma impedance and the antenna's temperature all have positive responses during the short ramp-ups of PL;ICRF. The core ion temperature increased from 1 keV to 1.5 keV and the core heating area expanded from |Z| ≤ 5 cm to |Z| ≤ 10 cm during the injection of ICRF waves. In the phasing scanning experiment, in addition to the same conclusions as the previous relatively phasing scanning experiment, the superposition effect of the fluctuation of stored energy, radiation power and neutron yield caused by phasing change with dual antenna, resulting in the amplitude and phase shift, was also observed. The active control of RF output facilitates the precise control of plasma profiles and greatly benefits future experimental exploration.

A 0.9-V human body communication receiver using a dummy electrode and clock phase inversion scheme

  • Oh, Kwang-Il;Kim, Sung-Eun;Kang, Taewook;Kim, Hyuk;Lim, In-Gi;Park, Mi-Jeong;Lee, Jae-Jin;Park, Hyung-Il
    • ETRI Journal
    • /
    • 제44권5호
    • /
    • pp.859-874
    • /
    • 2022
  • This paper presents a low-power and lightweight human body communication (HBC) receiver with an embedded dummy electrode for improved signal acquisition. The clock data recovery (CDR) circuit in the receiver operates with a low supply voltage and utilizes a clock phase inversion scheme. The receiver is equipped with a main electrode and dummy electrode that strengthen the capacitive-coupled signal at the receiver frontend. The receiver CDR circuit exploits a clock inversion scheme to allow 0.9-V operation while achieving a shorter lock time than at 3.3-V operation. In experiments, a receiver chip fabricated using 130-nm complementary metal-oxide-semiconductor technology was demonstrated to successfully receive the transmitted signal when the transmitter and receiver are placed separately on each hand of the user while consuming only 4.98 mW at a 0.9-V supply voltage.

Analysis of Tip/Tilt Compensation of Beam Wandering for Space Laser Communication

  • Seok-Min Song;Hyung-Chul Lim;Mansoo Choi;Yu Yi
    • Journal of Astronomy and Space Sciences
    • /
    • 제40권4호
    • /
    • pp.237-245
    • /
    • 2023
  • Laser communication has been considered as a novel method for earth observation satellites with generation of high data volume. It offers faster data transmission speeds compared to conventional radio frequency (RF) communication due to the short wavelength and narrow beam divergence. However, laser beams are refracted due to atmospheric turbulence between the ground and the satellite. Refracted laser beams, upon reaching the receiver, result in angle-of-arrival (AoA) fluctuation, inducing image dancing and wavefront distortion. These phenomena hinder signal acquisition and lead to signal loss in the course of laser communication. So, precise alignment between the transmitter and receiver is essential to guarantee effective and reliable laser communication, which is achieved by pointing, acquisition, and tracking (PAT) system. In this study, we simulate the effectiveness of tip/tilt compensation for more efficient laser communication in the satellite-ground downlink. By compensating for low-order terms using tip/tilt mirror, we verify the alleviation of AoA fluctuations under both weak and strong atmospheric turbulence conditions. And the performance of tip/tilt correction is analyzed in terms of the AoA fluctuation and collected power on the detector.

하이브리드 통신을 이용한 항로표지의 원격관리 제어시스템에 관한 연구 (A Study on the Tele-controller System of Navigational Aids Using Hybrid Communication)

  • 전중성;오진석
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제35권6호
    • /
    • pp.842-848
    • /
    • 2011
  • 다중통신을 지원하는 하이브리드 통신 제어보드는 저전력의 8-bit 마이크로콘트롤러인 ATxmega128A1으로 설계하였으며, 마이크로콘트롤러는 다중통신을 위한 모뎀과 GPS 모듈 등을 시리얼 인터페이스 하기 위한 8개의 UART 포트가 갖추어져 있으며, 내부에 2K 바이트의 프로그램 매개변수와 프로그램이 동작하는데 필요한 데이터를 저장할 수 있는 EEPROM과 128K 바이트의 플래시 메모리 및 프로그램이 실행되는 8K 바이트의 SRAM으로 구성되어 있다. 항로표지의 원격 관리를 CDMA, TRS, RF 등 하이브리드 통신을 이용하면 개별 통신 방식별로 음영지역이 존재하는 경우에도, 최적의 통신방식을 선택하여 통신을 수행하게 됨으로써, 통신 음영지역의 해소가 가능하다. 또한 통신장치마다 동일한 데이터 프레임을 사용함으로써 데이터의 호환성을 높였다. 실험은 30일 동안 각 부표에서 매 5분마다 데이터를 취득하였으며, 데이터 수신율은 85 % 이상을 보였다.

1:N HUB 기능을 가진 원격검침 단말기 개발에 따른 AMI 보급 추진 방안 연구 (A Research on the Promotion of AMI Supply by the Development of 1:N Mounted Remote Meter Reading Device)

  • 이형민;김민기;최은일;윤찬식
    • 한국가스학회지
    • /
    • 제25권6호
    • /
    • pp.1-6
    • /
    • 2021
  • 본 연구에서는 1(단말기):N(소형 전송기) 방식의 AMI단말기를 개발하였다. 현재 정부 주관 부처를 필두로 도시가스산업의 낙후된 계량시스템 선진화를 위해 가스 AMI 실증사업에 몰두하고 있다. 가스 스마트계량기의 보급은 사생활 침해 및 검침정보의 불확실성을 해소하고, 가스누출 감지를 통한 소비자 안전까지 대비할 수 있는 이점이 있다. 기존 스마트계량기의 경우 단말기와 전송기가 1:1 방식이었던 반면 본 기술은 1:N 방식을 적용하여 하나의 단말기로 다세대까지 확장 설치할 수 있으며, 저전력 설계를 구현하여 배터리 수명을 연장할 수 있는 기술이 적용되었다. 본 연구가 향후 가스 AMI 보급 사업에 기여할 것을 기대해본다.

고속 이동 통신 시스템을 위한 페이딩 예측기반 송신 전력 제어 (A Transmit Power Control based on Fading Channel Prediction for High-speed Mobile Communication Systems)

  • 황인관;이상국;류인범
    • 한국통신학회논문지
    • /
    • 제34권1A호
    • /
    • pp.27-33
    • /
    • 2009
  • 본 논문에서는 고속 이동성을 갖는 통신 시스템에서 회귀 신경망을 기반으로 한 페이딩 신호 예측 기법을 제안하고, 이를 이용한 송신 전력 제어를 제안하였다. 회귀 신경망의 연산 결과를 해석적으로 도출하여, 신경망 특유의 회로 복잡도 문제를 해결하고, 연산된 채널 예측치를 이용하여 최대비 결합(maximum ratio combining)방식으로 여러 개의 송신 안테나에 대하여 채널 이득을 산출하고, 이 산출된 값으로 송신 안테나 각각에 대한 송신 전력을 제어하였다. 모의 실험 결과 채널 예측 기반 전력 제어를 하지 않은 것에 비해 쥐어난 성능을 나타냄을 보여준다. 기존의 대부분의 연구들이 페이딩 신호에 강인한 수신기술에 대하여 연구를 하였거나 페이딩 신호에 대한 채널 예측도 저속의 이동성에 국한되어진 것에 비하여, 제안된 채널예측 방법은 개회로 전력제어에 적용하는 경우 송신단에서 페이딩의 영향을 제거하여 신호를 송신하기 때문에 수신 단에서 여타의 요소기술들을 매우 단순하게 설계하거나 시스템의 복잡도를 획기적으로 개선시킬 수 있는 가능성을 제시하였다.

S대역 군사 레이더용 2kW급 GaN HEMT 증폭기 개발 (Development of 2-kW Class C Amplifier Using GaN High Electron Mobility Transistors for S-band Military Radars)

  • 김시옥;최길웅;유영근;임병옥;김동길;김흥근
    • 한국전자통신학회논문지
    • /
    • 제15권3호
    • /
    • pp.421-432
    • /
    • 2020
  • 본 논문에서는 S-밴드 군용 레이더에 사용되고 기존의 TWTA를 대체하기 위해 GaN HEMT 기반 증폭모듈을 이용하여 개발한 2kW급 반도체증폭기(SSPA)를 제안하였다. 제안한 SSPA는 8개의 증폭모듈로 이루어진 고출력증폭모듈, 구동증폭모듈, 제어모듈 및 전원공급 장치로 이루어져 있다. 제안한 SSPA는 1) 증폭모듈과 구성부품은 공간적 제약으로 작은 패키지에 통합설계 되었으며, 2) PCB 내장형 하모닉필터를 이용하여 고주파를 제거하였으며, 그리고 3) 입력신호의 듀티 변화에 대응하여 일정한 출력이 유지되도록 하는 자동이득조절기를 설계하였다. 제안된 SSPA는 최대 48 dB의 이득과 3.1~3.5 GHz의 주파수 대역에서 63-63.6 dBm의 출력 전력을 보였다. 자동이득조절 기능은 15-20 dBm의 입력전력 변동에도 대해서, 출력전력이 63dBm 전후로 일정하게 유지하는 것을 확인하였다. 마지막으로 MIL-STD-810의 시험기준을 만족하는 높은 (55 ℃) / 낮은 (-40 ℃) 온도시험 프로파일을 이용한 온도시험을 통해 개발된 시스템의 신뢰성을 검증하였다. 개발된 SSPA는 경량, 고출력, 고이득, 안전기능, 낮은 수리비, 짧은 수리시간 등 측면에서 기존의 TWTA 증폭기보다 우수한 것을 확인하였다.

Wiener Filtering 기법을 적용한 홈헬스케어용 심전도 신호 모니터링 시스템 구현 (Implementation of the ECG Monitoring System for Home Health Care Using Wiener Filtering Method)

  • 정도운;김세진
    • 융합신호처리학회논문지
    • /
    • 제9권2호
    • /
    • pp.104-111
    • /
    • 2008
  • 심전도(electrocardiogram, ECG)는 심장의 수축과 이완에 따라 체표면에서 측정 가능한 생체전기신호이며, 환자의 심장 상태와 일반적인 건강 정보를 제공하므로 건강모니터링을 위한 중요한 지표로서 인식된다. 심전도신호에는 전원잡음, 근잡음 등과 같은 고주파잡음과 동잡음과 같은 저주파 잡음이 포함되는 경우가 많다. 하지만 심전도로부터 잡음을 제거하는 것은 쉽지 않으며, 필터링 결과는 심전도신호의 외곡을 초래할 수도 있다. 본 연구에서는 일상생활 중 건강모니터링용으로 사용하기 위해 동잡음에 강인한 소형의 저전력 심전도측정 시스템을 구현하였다. 심전도 모니터링 시스템은 심전도 증폭기, 마이크로프로세서, 블루투스모듈, 모니터링 프로그램등으로 구성하였다. 심전도증폭기는 저전력 계측용 증폭기를 이용하여 설계 및 구현하였으며, 증폭기로부터 데이터를 수집하여 신호처리하고 무선전송하기 위해 마이크로프로세서를 사용하였다. 그리고 마이크로프로세서로부터 PC로 데이터를 전송하기 위해 블루투스 모듈을 사용하였다. 구현된 시스템의 성능 평가를 위하여 적응필터 성능평가 시뮬레이션을 수행하였으며, 실제 동잡음 환경에서 신호측정 및 잡음제거 실험을 수행하여 잡음제거 특성을 평가하였다.

  • PDF