• 천문학회지
• /
• 제37권4호
• /
• pp.137-141
• /
• 2004

We have estimated the fractal dimension of the molecular clouds in the Antigalactic Center based on the $^{12}CO$ (J = 1- 0) and $^{13}CO$ (J = 1- 0) database obtained using the 14m telescope at Taeduk Radio Astronomy Observatory. Using a developed code within IRAF, we were able to identify slice-clouds, and determined the dispersions of two spatial coordinates as well as perimeters and areas. The fractal dimension of the target region was estimated to be D = 1.34 for low resolution $^{12}CO$ (J = 1 - 0) database, and D = 1.4 for higher resolution $^{12}CO$ (J = 1 - 0) and $^{13}CO$ (J = 1 - 0) database, where $P {\propto} A^{D/2}$. The sampling rate (spatial resolution) of observed data must be an important parameter when estimating fractal dimension. Our database with higher resolution of 1 arcminute, which is corresponding to 0.2 pc at a distance of 1.1 kpc, gives us the same estimate of fractal dimension to that of local dark clouds. Fractal dimension is apparently invariant when varying the threshold temperatures applied to cloud identification. According to the dispersion pattern of longitudes and latitudes of identified slice-clouds, there is no preference of elongation direction.

• 대한한의진단학회지
• /
• 제11권2호
• /
• pp.84-95
• /
• 2007

Background and Purpose: We have studied the trends of EEG signals in the voluntary breathing condition by applying the fractal analysis. According to chaos theory, irregularity of EEG signals can result from low dimensional deterministic chaos. A principal parameter to quantify the degree of Chaotic nonlinear dynamics is correlation dimension. The aim of this study was to analyze correlation between the correlation dimension of EEG and HRV(heart rate variability). We have studied the trends of EEG signals in the voluntary breathing condition by applying the fractal analysis. Methods: EEG raw data were measured by moving windows during 15 minutes. Then, the correlation dimension(D2) was calculated by each 40-seconds-segment in 15 minutes data, totally 36 segments. 8 channels EEG study on the Fp, F, T, P was carried out in 30 subjects. Results and Conclusion: Correlation analysis of HRV was calculated with deterministic non-linear data and stochastic non-linear data. 1. Ch1(Fp1), Ch4(F3), Ch4(F4) is positive correlated with In LF. 2. Ch1(Fp1), Ch3(F3) is positive correlated with In TF.

• Educational Technology International
• /
• 제10권2호
• /
• pp.127-143
• /
• 2009

The purpose of this study was to identify the interaction patterns in distance only mode e-Learning. In order to investigate this study, messages shown in the electronic notice board were analyzed to see how interaction occurs between teacher and learner or learner and learner under the e-learning of cyber university. To analyze messages was applied according to the framework by Henri's contents analysis model. As a result of contents analysis on electronic board, the participative dimension was 399 messages. A learner put on 7~8 messages a day. The number of messages was low compared to the number of learners, but the number of inquiries was about 140. That means that each learner contacts and checks messages at least once a day. The meaning dimension was 600 units. The main interaction patterns were Interactive-social-cognitive-metacognitive. This means that e-Learning in distance only mode leads a positive attitude of learners as a self-directed learning, and needs teacher's well-structured instructional strategies for increasing interaction. In conclusion, social dimension and interactive dimension of messages support learners psychologically in the process of learning though they directly guide learning under the circumstances of e-learning lacking face-to-face element. It can be interpreted that the teacher's role is significantly important in order to attract learners' positive participation and cognitive and meta-cognitive dimension of messages and activities

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.315-318
• /
• 1988

PHOTO-RESIST 자체문제로인해 감소되는 최소해상력, 촛집심도여유 및 CRITICAL DIMENSION (C.D.) 조정여유도등을 연구하였다. 기존에 사용중인 PHOTO-RESIST(큰 분자량)와 PHOTO-RESIST자체내에 CONTRAST 촉진 물질(CEM)이 첨가된것(INNER CEM TYPE) 및 PHOTO-RESIST구성성분중 작은 분자량/좁은 분자량 산포가 형성된 RESIN 의 PHOTO-RESIST(LOW MOLECULAR WEIGHT CONTROL TYPE)등 세가지 PHOTO-RESIST를 사용 하여 상기의 항목을 분석하였다. INNER CEM TYPE 및 LOW MOLECULAR WEIGHT CONTROL TYPE의 PHOTO-RESIST는 기존에 사용중인 RESIST보다, 최소 RESOLUTION은 약 0.2 - 0.3 um, DEPOCUS MARGIN은 약 0.8 - 1.2 um 및 C.D. CONTROL LATITUDE 향상된 것 등이 우수하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1996년도 추계학술대회 논문
• /
• pp.96-100
• /
• 1996

So far the analysis and modeling of cutting process is studied commonly assumed as being linear stochastic or chaotic without experimental verification. So we verified force signals of cutting process(ball end-milling) is low-dimensional chaos by calculating Lyapunov Exponents. reconstructing attractor using time delay coordinates and calcula-ting it's fractal dimension.

• 대한수학회지
• /
• 제47권1호
• /
• pp.189-213
• /
• 2010

We study Fano manifolds of pseudoindex greater than one and dimension greater than five, which are blow-ups of smooth varieties along smooth centers of dimension equal to the pseudoindex of the manifold. We obtain a classification of the possible cones of curves of these manifolds, and we prove that there is only one such manifold without a fiber type elementary contraction.

• 한국양식학회지
• /
• 제18권3호
• /
• pp.189-195
• /
• 2005

By testing the separation performance for a fine settleable solid removal system in an aquaculture system using polystyrene particles as an experimental substitute, the optimal geometric dimensions for a Low-Pressure Hydrocyclone (LPH) were obtained. The design approach far the LPH took into consideration two inflow diameters (Di: 30, 50 mm), three overflow diameters (Do: 60, 70, 100 mm) and four cylinder lengths (Lc: 250, 345, 442, 575 mm), while the cylinder diameter (Dc) at 335 mm, the underflow diameter (Du) at 50 mm and the cone angle (${\theta}$) at $68^{\circ}$ were kept constant. The separation performances of 19 different dimension combinations of LPH were tested, ranging from 300 to 1200 ml/sec of inflow rate using substitute polystyrene particles (0.4-0.7 mm dia., ${\rho}_s=1.05g/cm^3$). These polystyrene particles exhibit a similar density and settling velocity to the fine fecal debris of the common carp. The total separation efficiency for the inflow rate ranged from a high of 97% to a low of 20%. Experimental results obtained by ANCOVA and the Tukey test (${\alpha}=0.05$) showed that the separation performances of the LPH were significantly affected (P<0.05) by the fi, Di, Do and Lc. The maximum separation performance was detected at a dimension combination of 30 mm of inflow diameter (Di), 60 mm of overflow diameter (Do), 442 and 575 mm of cylinder length (Lc). The dimension proportions were 0.09, 1.32-1.72, 0.18 and 0.15 for Di/Dc, Lc/Dc, Do/Dc and Du/Dc respectively.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.817-821
• /
• 1997

Ever since the nonlinearity of machine tool dynamics was established, researchers attempted to make use of this fact to devise better monitoring, diagnostics and system, which were hitherto based on linear models. Theory of chaos, which explains many nonlinear phenomena comes handy for furthering the analysis using nonlinear model. In this study, measuring system will be constructed using multi-sensor (Tool Dynamometer, Acoustic Emission) in end millingprocess. Then, it will be verified that cutting force is low-dimensional deterministic chaos calculating Lyapunov exponents, Fractal dimension, Embedding dimension. Aen it will be investigated that the relations between characteristic parameter caculated form sensor signal and tool wear.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(5)
• /
• pp.211-214
• /
• 2002

Under a continuous manufacturing process, two dimension inspection system causes problems as blurring effect and low resolution and requires position calibration between frames. One dimension inspection system is, therefore, being researched as a substitution. In this paper, we implement mechanism of switching memory and processing data for reasonable one dimension inspection system. Redundant weft image and noise was suggested to be reduced by new method using modified morphological process and masked erosion process. From resulting image, line data and possible error information were obtained and constructed as a structure. Finally, error detecting algorithm was performed with this data structure. Processing time of error detecting was 0.625ms per line in applied system and experiment showed 94.7% of error detecting ability. This method is 20% faster in speed and 2.7% higher in error detecting ability comparing with the present method.

• The International Journal of Costume Culture
• /
• 제5권3호
• /
• pp.204-212
• /
• 2002

The purpose of this study is to find out relationships among Gender Body Ideology, and clothing preferences. Subjects consisted of 75 female elementary school students, 64 female high school students, and their mothers(139) who are currently residing in Daejeon, Korea. The research was a ex-post facto relational study and the instruments for the study were GBI, genderlogy and 24 clothing stimuli for measuring clothing preferences. The reliability and validity of the measuring instruments were verified by results of judge group analysis and pre-tests. The factor analysis of GBI emerged 4 major factors in Being dimension, and 4 major factors in Doing dimension. Medium low correlations existed between the two GBI dimensions, and genderlogy was correlated specially with the Being dimension. Two GBI dimensions and genderlogy effected on preferences and Possessions of some selected design elements, however, GBI showed higher Predicting power for clothing preference.