Transactions of the Korean Society of Automotive Engineers
/
v.22
no.4
/
pp.30-35
/
2014
According to weight lightning trend of automobile body, necessity of resistance spot welding (RSW) of Mg alloy on automobile industry is increasing rapidly because of the highest specific strength among commercial metals. Mg alloy has low electric resistance and high thermal conductivity like as Al alloy, so that needs applying high current in short time when welding. Thick oxide film of Mg alloy pollutes the electrodes and makes partial current carrying paths when on welding. Partial current carrying paths signify excessive concentration of current. There can initiate expulsion easily and reduces electrode life rapidly. Generating partial current carrying paths and expulsions are influenced by shapes of electrode. Therefore, electrode life also influenced by shape. In this study, we perform life test of RSW electrode of radius type. Measure tensile shear load and nugget size every spot alternately. As a result, radius type electrode can extend life over twice as dome type electrode.
The purpose of this paper is to diagnose the errors by comparing putting motion with the single pendulum pattern applicable to putting in golf skill and order prescription that correct errors of putting. In the modern-day game of golf, putting remains the key to shooting low scores, and the ability to hole putts can turn a good round into a great round A semi-golfer, subject(sex female, age 20yrs, mass 94.3kg, height 1.65m) who has troubles to do putting is chosen. Six cameras, ProReflex MCU240(240Hz) made by Qualisys company is used to capture putting motion and data is processed by QTM(Qualisys Track Manager) and Mathematica 5.0. The result that differentiates the putting and the single pendulum pattern is acquired To make the pattern of subject's putting to the single pendulum pattern quasi-equal, one tries to lower center of mass gradually. As a result of it, one has a similar pattern like the single pendulum Conclusively, to lower C.O.M one orders prescriptions that increase the weight and length of a putter and lower C.O.M subject's segment. Further improvements to the study could be to train a subject according to prescriptions and to monitor putting again. It will probably be necessary to simulate putting motions and to research relations for body shapes and putting patterns in order to establish suitable putting-motions.
When examining a patient using SPECT, gamma rays emitted from the body decrease or scatter. And when they reach the detector they spread in accordance with physical characteristics and geometric shapes of the scanner, quantitative analysis was difficult. For exact quantitative analysis of gamma rays emitted from the body, so that they must be considered to correction about PVE(partial volume effect). In this paper, sinogram filter was implemented to solve comprehensive PVE of SPECT. According to the results in which implemented filter was applied, partial volume effect caused by SPECT was removed. To compare proposed method and conventional method, PSNR(Peak Signal to Noise Ratio) was executed. As a result, proposed method was indicated as 7dB, conventional method was indicated as 14db respectively. dB(decibel) level of the proposed methods is lower, since the MSE(mean square error) becomes greater because scattered ray was removed, PSNR value is low. Therefore, by applying the proposed method for removing the PVE of SPECT imaging method, the image quality is improved.
Journal of the Korean Society of Clothing and Textiles
/
v.32
no.8
/
pp.1190-1201
/
2008
The objective of this study is to compare and analyze middle and high school boys' and girls' uniform wearing conditions. The survey was conducted online and data were obtained from 907 middle and high school boys and girls. The results of this study are as follows. First, most boys and girls did not know their body sizes other than their height and weight. Second, when purchasing the school uniforms, over 70% of the boys and girls chose to try on the uniforms before their purchase and over 60% of the boys and girls had trouble selecting their sizes just by reading the labels. Third, both boys and girls considered the fit as the most important factor. When purchasing jackets, both middle and high school boys considered the shoulder width as most important. Middle school girls considered the jacket and sleeve length as most important, whereas high school girls considered the shoulder width, waist, and bust as most important. When purchasing skirts or slacks, waist girth was considered as most important. Fourth, boys repurchased more school uniforms than girls. Boys have outgrown their uniforms usually in the length categories, whereas girls have outgrown in the girth categories. Fifth, more girls(72.7%) modified their uniforms than the boys(56.8%). Boys usually bought bigger uniforms, modified them to fit and when they grow out of their uniforms they planned to modify their uniforms again whereas girls modified their uniforms to follow the trend. Sixth, the online shopping mall survey has revealed that both boys and girls liked the idea of 3D model that reflect their own body shapes, but they had low preference to purchase school uniforms online. Online purchase has been more attractive to the boys than to the girls, while the way of fashioning uniforms has been more attractive to the girls than to the boys.
Journal of the Korean Society of Clothing and Textiles
/
v.34
no.9
/
pp.1479-1490
/
2010
This study provides basic data for the development of jacket patterns which reflect designs corresponding to the body shape features and preferences of obese women in their 20s and 30s by understanding problems they may encounter in wearing a ready-made jacket by researching the reality of ready-made tailored jacket wearing and their design preferences. A survey was conducted by sampling 82 obese women (over $25kg/m^2$ BMI) between the ages of 20 to 39. The details of the survey consists of general information, interest rate and importance rate on clothes, reality of wearing and purchasing jackets, measurement fits per each part, and preferred designs. SPSS 14.0 was used to analyze the data. The results showed that 76.8% of obese women wore their jackets less than 5 times a month. Those in the 20s wore the jackets more frequently than those in the 30s. The reasons for not wearing jackets frequently included uncomfortableness in activities and unavailability of the correct size. A total of 55% of the total preferred the fitting to be relatively smaller than the body size or tightly fitting. Although in the past, there was a tendency to wear a loose fit to cover the body shape, currently even obese body shapes avoided the loose fit as the tight fit is the trend. In terms of the satisfaction rate for the measurements per each part of jackets, there was a low satisfaction rate for most of the items. For the circumference items such as waist length and chest size, people responded that they were too small and for the length of items such as the length of jacket and sleeve length, people responded that they were too long. This was because the readymade clothes brands increase the length of items and circumference items in uniform in the same intervals when producing large sizes. Both those in the 20s and the 30s preferred a tight fit. In terms of preferred fabric, a wool/spandex mix was most popular and then cotton/spandex. This shows that they prefer those fabrics which allow an excellent activity while maintaining the exterior well. In addition, they preferred black color with no patterns because they wanted their body size to look reduced and did not want to receive any attention.
Changes of fruiting body yield and morphology according to growing temperatures in Pleurotus strains were investigated. In this study, twelve commercial strains divided into low, medium and high temperature groups were tested. On the basis of fruiting body yield, they showed best in their own temperature properties. On the other hand, they didn't have any fixed tendency to growing temperatures on morphological characteristics. Thicknesses of pilei were best at $10^{\circ}C$, having nothing to do with strains. Lengths of stipes were increased with the progress of cultivation temperatures in five strains including 'Sambok'. The other strains showed differences on this trait. Thicknesses of stipes were decreased with the progress of cultivation temperatures in other strains excepting 'Sambok and ASI2029'. Days for harvest were extended as temperature decreased, even though the shortest days were different according to strains. Sometimes there were abnormal shapes of fruiting bodies in response to temperatures in some strains. In 'Suhan-1', white cilia fully covered onto the surface of pilei were observed macroscopically at the early stage and then disappeared or remained a little later at $10^{\circ}C$ cultivation. In 'Chunchu-2', their stipes were twisted and bent over $20^{\circ}C$ cultivation.
Journal of The Korean Society of Agricultural Engineers
/
v.60
no.2
/
pp.25-36
/
2018
Drip irrigation system is a low energy cost method which can efficiently save and supply water by dropping water slowly on the crop's root zone during crop growth. In the drip irrigation system, disk filters take an important role to physically remove impurity (inorganic and suspended organic) particles present in agricultural water which can cause emitter clogging. For the purpose, both top-and-bottom surfaces of the disk are grooved in micron size flowing from outside to inside. However, many congested flow paths in disk filter media incur higher head loss of inflow water resulting in relatively decreasing velocities depending on operation time than sand and mesh filters. Therefore, it is important to optimize the structure of disk filter in micro irrigation system. The head loss of disk filter media takes also charge of more than 60 % of total head loss in whole disk filter. This study is to find the appropriate cross-sectional shape of the disk groove to minimize the head loss by executing the experiment. The experiment used three disk filters that have similar filter body but have a half-elliptic and two kinds of triangular cross sections. The experimental results showed that the disk filter with half-elliptic cross sections of disk grooves have less head loss than the disk filter with regular triangular one.
Gu, Tae Hong;Kim, Un Mi;Kim, Jong Min;Kwon, Tae Soo
Journal of the Korea Computer Graphics Society
/
v.23
no.5
/
pp.67-73
/
2017
We propose several techniques which can be employed in a 3D fitness program for monitoring and correcting user's posture. To implement a 3D fitness program, improved reference motion generating techniques and visualizing techniques are necessary. First, in order to understand the difference between the user and the reference movement of a professional, a retargeting method between two different body shapes are studied. Second, the problem of self-occlusion, which occurs when using a low-cost depth sensor to represent complex motions, is solved by using a sample database and time consistency. The system proposed in this paper evaluates the user's posture considering the physical characteristics of the user, and then provides feedback to the user.
This study is regarding closed and open forms, which have relatively high recognition among visual perception phenomena in costumes. In particular, this study reviewed closeness and openness of ethnic look, which is a representative open costume. Closed form can be summarized as simple and clear silhouette, conspicuous differentiation from the background, simple construction of the costume and colors with low brightness and clearness. It Is modern, functional, rational and modest. On the other hand, open form can be summarized as complicated and inconspicuous edge line, complicated inner shape and colors with high brightness, high clearness and vividness. It includes concepts of pleasure, entertainment, joy, eroticism, rebel and resistance. Modern costumes have been simplified for a long time and they have functional and closed characteristics in their shape, structure and form. On the other hand, modern open form costumes are usually found in sub-cultural styles such as punk, hippie, kitsch and vintage, and some ethnic looks. Following is a summary of the characteristics of open form shown in the ethnic look. 1. The shape, structure of costumes, hair accessories, lace, ruffle and ornaments are complicated and irregular. 2. The silhouette is inconspicuous because of ambiguity between backgrounds and ABC (Apparel-Body-Construct) or the use of see-through materials. 3. It makes complicated visual shapes because it does not have a single type but is composed of various clothing items together. 4. It gives complex feelings by matching various colors or more than two different fabrics. 5. It looks like the open type because of the complex patterns shown in the costumes.
This research was conducted to understand the different circumstances for wearing shirts by adult males aged 20-39, and to provide this basic information to the shirt industry prior to developing new functional men's shirts. A total of 345 respondents participated in the survey. Most of questionnaire, frequency, mean and standard deviation were calculated and the differences between the 20s and 30s were analyzed by t-test or ${\chi}^2$ test. The results of the survey are as follows. Grading the satisfaction degree of their body parts, the respondents were relatively unsatisfied with their height, weight, and waist, abdominal and hip circumferences. Majority preferred department stores, discount stores and outlets for purchasing shirts. Many have never owned tailored shirts - men in 20's had less experience with tailoring than men in 30's. The foremost selection criterion for purchasing shirts was fit -during purchase, men in their 20's considered fit more important than men in their 30's. The most preferred unbuttoning of the top button when wearing shirts. For favored collar shapes with one button unbuttoned, the most valued collar angle and style was V-neck shape when unbuttoned, low collar band, collar with unopened collar, and stiff collars. Most shirt designs and details included slim fit, no dart in the front and one dart on the back. Men in 20's more preferred the no dart in the front and one tuck on the back, as compared to men in 30's. On the other hand, men in their 30's preferred one dart shirts than men in 20's. Regarding shirt bands and cuffs, one button and regular collar and one button cuffs with round angle design, were the most preferred, respectively.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.