• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.4 no.2
• /
• pp.153-163
• /
• 2000

The non-dimensional convective heat losses from each surface are investigated as a function of the non-dimensional fin length, width and the ratio of upper surface Biot number to bottom surface Biot number (Bi2/Bi1) using the three-dimensional separation of variables method. Heat loss ratio in view of each surface with the variation of Bi2/Bi1 is presented. The variation of the non-dimensioal temperare profile along the fin center line for a thermally asymmetric conditions is also presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1493-1495
• /
• 1997

Cropping of head and tail ends of rod in wire Rolling Process is required to aviod roll damage, and prevent cobbles. In order to reduce the crop loss, the new crop control system for rotary shear of Wire rolling Process has been developed. Performance shows the developed system cut precisely within setting length. As a result, it is expected to increase the yield ratio of products about 0.2 percent and stabilize the operantional condition.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.12 no.1
• /
• pp.25-32
• /
• 2008

A pin fin is optimized based on the increasing rate of heat loss by using a two-dimensional analytic method. The optimum heat loss, corresponding optimum thermal resistance and fin length are presented as a function of the fin base thickness, convection characteristic numbers ratio, fin outer radius and ambient convection characteristic number. One of the results shows that both the optimum heat loss and fin length decrease linearly whereas the optimum thermal resistance increases very slightly with increase of the fin base thickness.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.04a
• /
• pp.218-227
• /
• 1998

Present study is undertaken to optimize the lubrication reliability and frictional loss of the dynamically-loaded journal bearing in hermetic reciprocating compressor with alternative refrigerant R600a application. Thermodynamic and dynamic analysis has been conducted to investigate cylinder pressure variations by substitution alternative refrigerant R600a for R12. The modeling of the dynamics of the compressor mechanism has been performed with lumped mass method. A mathematical model is developed for analyzing the dynamics of the journal bearing system with the mobility method. It takes into account the effects of the refrigerant species, aspect ratio, clearance ratio and surface roughness. A corresponding computer program is described which enables to obtain the minimum film thickness and frictional loss. Design optimization is graphically performed by parametric studies of the aspect ratio and clearance ratio.

• Progress in Superconductivity and Cryogenics
• /
• v.4 no.1
• /
• pp.13-16
• /
• 2002

$SrZrO_3 $resistive oxide barriers on Ag sheathed Bi2223 tapes were prepared by the sol-gel and dip coating method to reduce AC coupling loss. The performance of the dip-coated $SrZrO_3 $ thin films was evaluated in terms of bond strength by varying the Sr/Zr mol ratio and the amount of organic vehicle (ethyl cellulose and a-terpineol) additives. The bond strength of the coatings increased as the Sr/Zr ratio decreased and the amount of organic vehicle rose, respectively. It was found that the effect of organic vehicle addition was more pronounced, suggesting that the adherence of the $SrZrO_3 $ films on Bi2223 tapes was governed primarily by the amount of organic vehicle additive.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.5 no.3
• /
• pp.153-162
• /
• 2001

This paper presents the fundamental study on rational manufacture of Ultra High Strength(VHS) concrete using industrial by-products as like silica fume, slag and fly ash. In this study, we had tested various mixing cases to manufacture the UHS concrete(target compressive strength : over $1,000kgf/cm^2$) which is easily workable (target slump flow : $60{\pm}10cm$). The main variables are studied: 1) to find the optimum replacement ratio of mineral admixture. 2) to find a rational water-binder ratio and a proper binder content. 3) to find the method for reduction of slump loss. From the test results, it is concluded that the rational mix design can be made by using 40% slag, 10% silica fume. We found that compressive strength of UHS concrete increases according to decreasing W/B ratio but in W/B ratio 18~20%, the difference is vague and the compressive strength does not necessarily increase according to increasing binder content over 700kg.

• Safety and Health at Work
• /
• v.11 no.2
• /
• pp.199-206
• /
• 2020

Background: In a wide range of industries, noise-induced hearing loss remains one of the most prevalent occupational problems. This study aimed to assess the noise exposure level and associated factors of hearing loss among textile workers in Yangon Region, Myanmar. Methods: A cross-sectional study was conducted at a Textile mill (Thamine), Yangon Region, from April to December 2018. In total, 226 workers who were randomly selected from 3 weaving sections participated in face-to-face interviews using a structured questionnaire. A digital sound level meter and pure-tone audiometer were used for the assessment of noise exposure level and hearing loss, respectively. Logistic regression analysis was performed to assess the associated factors of hearing loss. Results: In total workers, 66.4% were exposed to ≥85 dB(A) of noise exposure, and the prevalence of hearing loss was 25.7%. Age ≥35 years, below high school education, hearing difficulty, tinnitus, hypertension, > 9 years of service duration in a textile mill were positively associated with hearing loss. After adjusting confounding factors, age ≥35 years (adjusted odds ratio = 6.90, 95% confidence interval = 3.45-13.82) and tinnitus (adjusted odds ratio = 2.88, 95% confidence interval = 1.13-7.37) were persistently associated with hearing loss. Conclusion: Providing occupational hazard education and enforcement of occupational safety regulations should be taken to decrease the noise exposure level. The regular audiometry test should be conducted for assessment of hearing threshold shift. The employer needs to implement a hearing conservation program in workplace when noise exposure reaches or exceeds 85 dB(A) for 8 hours.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.2
• /
• pp.176-182
• /
• 2021

This paper evaluates and compares the performance of the Deep Nerual Network (DNN)-based speech enhancement models according to various loss functions. We used a complex network that can consider the phase information of speech as a baseline model. As the loss function, we consider two types of basic loss functions; the Mean Squared Error (MSE) and the Scale-Invariant Source-to-Noise Ratio (SI-SNR), and two types of perceptual-based loss functions, including the Perceptual Metric for Speech Quality Evaluation (PMSQE) and the Log Mel Spectra (LMS). The performance comparison was performed through objective evaluation and listening tests with outputs obtained using various combinations of the loss functions. Test results show that when a perceptual-based loss function was combined with MSE or SI-SNR, the overall performance is improved, and the perceptual-based loss functions, even exhibiting lower objective scores showed better performance in the listening test.

• Korean Journal of Optics and Photonics
• /
• v.14 no.4
• /
• pp.454-459
• /
• 2003

We report the first demonstration of 10 Gb/s wavelength conversion in a Mach-Zehnder interferometric wavelength converter monolithically integrated with a loss-coupled DFB probe source. The integrated device is fabricated using a BRS (buried ridge stripe) structure with an undoped InP clad layer on the top of a passive waveguide to reduce high propagation loss. The device exhibited a static extinction ratio of 11 dB. Good performance at 10 Gb/s is obtained with an extinction ratio of 7 dB and a power penalty of 2.8 dB at a 10$^{-9}$ bit error rate.

• Textile Coloration and Finishing
• /
• v.10 no.5
• /
• pp.39-47
• /
• 1998

The purpose of this study was to investigate the effect of alkali treatment on EG solution of polyester/silk union cloth(P/S cloth) . Tensile strength, moisture regain, crease resistance, and reduction ratio of the treated P/S cloth were measured. The results of this study were as follows ： 1) The weight loss of P/S cloth treated with EG solution was three times higher than those of P/S cloth treated with $H_2O$. The weight loss of P/S cloth was increased greatly with increasing concentration of NaOH, temperature, and time. Favorable weight reduction of treating condition could be obtained when lower concentration of NaOH was used with longer time. 2) If it was added $H_2O$ on EG solution, weight loss of polyester increased, while those of silk decreased. In addition, decreasing ratio of tensile strength warp direction (polyester) was lower, while those of weft direction(silk) was higher. 3) Moisture regain of P/S cloth treated with EG solution increased with weight loss up to 10% . Crease resistance of P/S cloth was the highest at weight loss of 10~15%.