• Title/Summary/Keyword: loss frequency

Search Result 3,558, Processing Time 0.033 seconds

THE CHANGE OF THE INITIAL DYNAMIC VISCO-ELASTIC MODULUS OF COMPOSITE RESINS DURING LIGHT POLYMERIZATION (광중합 복합레진의 중합초기 동적 점탄성의 변화)

  • Kim, Min-Ho;Lee, In-Bog
    • Restorative Dentistry and Endodontics
    • /
    • v.34 no.5
    • /
    • pp.450-459
    • /
    • 2009
  • The aim of this study was to measure the initial dynamic modulus changes of light cured composites using a custom made rheometer. The custom made rheometer consisted of 3 parts: (1) a measurement unit of parallel plates made of glass rods, (2) an oscillating shear strain generator with a DC motor and a crank mechanism, (3) a stress measurement device using an electromagnetic torque sensor. This instrument could measure a maximum torque of 2Ncm, and the switch of the light-curing unit was synchronized with the rheometer. Six commercial composite resins [Z-100 (Z1), Z-250 (Z2), Z-350 (Z3), DenFil (DF), Tetric Ceram (TC), and Clearfil AP-X (CF)] were investigated. A dynamic oscillating shear test was undertaken with the rheometer. A certain volume ($14.2\;mm^3$) of composite was loaded between the parallel plates, which were made of glass rods (3 mm in diameter). An oscillating shear strain with a frequency of 6 Hz and amplitude of 0.00579 rad was applied to the specimen and the resultant stress was measured. Data acquisition started simultaneously with light curing, and the changes in visco-elasticity of composites were recorded for 10 seconds. The measurements were repeated 5 times for each composite at $25{\pm}0.5^{\circ}C$. Complex shear modulus G*, storage shear modulus G', loss shear modulus G" were calculated from the measured strain-stress curves. Time to reach the complex modulus G* of 10 MPa was determined. The G* and time to reach the G* of 10 MPa of composites were analyzed with One-way ANOVA and Tukey's test ($\alpha$ = 0.05). The results were as follows. 1. The custom made rheometer in this study reliably measured the initial visco-elastic modulus changes of composites during 10 seconds of light curing. 2. In all composites, the development of complex shear modulus G* had a latent period for $1{\sim}2$ seconds immediately after the start of light curing, and then increased rapidly during 10 seconds. 3. In all composites, the storage shear modulus G" increased steeper than the loss shear modulus G" during 10 seconds of light curing. 4. The complex shear modulus of Z1 was the highest, followed by CF, Z2, Z3, TC and DF the lowest. 5. Z1 was the fastest and DF was the slowest in the time to reach the complex shear modulus of 10 MPa.

A Clinical Study of Tinnitus (耳鳴에 관한 임상적 연구)

  • Choi, In-Hwa
    • The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
    • /
    • v.14 no.2
    • /
    • pp.134-145
    • /
    • 2001
  • Introduction: Noises in the ear, whether real or imagined, are called tinnitus. Subjective causes of tinnitus(which is heard only by the patient) are extremely common and the majority of them are treated conservatively. For certain individuals their tinnitus is a major handicap; for others a trivial concern. The most common from of subjective tinnitus is a rushing, hissing or buzzing noise; it is frequently associated with sensorineural heanng loss. The patient may be unaware of the hearing loss, especially if it is a high frequency deficit of moderate severity. The character of the tinnitus may give a clue to the etiology. But the patient often has difficulty in explaining his/her tinnitus in absolute terms, as they have no other tinnitus with which to compare it but their own Tinnitus, like pain, is a subjective state and trying to objectively assess the severity is problematic. Audiological techniques to match subjective loudness to machine-produced noise may offer some help, in that sound intensity matches can bear little correspondence to subjective complaint. In spite of many studies, most patients presently seen complaining of tinnitus are told by their doctors that there is no treatment and that they will have to learn to live with this symptom. Objectives: To perform a clinical analysis of tinnitus and estimate the efficacy of Oriental Medical treatment according to the Byeonjeung(辨證). Subject: We studied 34 patients with complaints of tinnitus who had visited Pundang Cha Oriental Medicine Hospital Department of Otorhinolaryngology from March 1998 to February 2000. All of them had been treated 2 or 3 times a week with acupuncture treatment and had taken herbs according to the Byeonjeung(辨證) method. It was therefore possible for me to know whether their symptoms improved or not. Parameters Observed and Method: We treated them with acupuncture & herb-medication. Sometimes we gave them moxibustion or negative therapy with bloodletting at the acupuncture points(耳門, 聽宮, 聽會). Parameters Observed 1) Distribution of age & sex 2) Chief complaints 3) The sites of tinnitus 4) The quality of tinnitu 5) The duration of disease 6) The problem induced tinnitus 7) Factors increasing disease severity 8) The classification of the Byeonjeung(辨證) 9) The efficacy of treatments Results: 1. Age and sex distribution: The most common occurrence was found in males in their twenties: 6 males($17.7\%$), and in females in their thirties and over sixty: 8 females($23.5\%$). Total patient numbers for men and women were 20 men($58.8\%$), 14 women ($41.2\%$). 2. The most frequent major complaints were hearing disturbances related to tinnitus; and dizziness with tinnitus; each comprising 10 cases($29.4\%$). There were also 7 patients($20.6\%$) with only tinnitus. 3. Tinnitus sites: 13($38.2\%$) said that they felt tinnitus in both ears, equally. In the right ear, 9($26.5\%$), in the left, 6($17.7\%$). 4. The most frequent descriptive symptoms of tinnitus were: humming, hissing, buzzing etc. 5. The duration of disease. 14cases($41.2\%$) had a duration of less than 1 year. 6. 15cases($44.1\%$) complained that it was hard to watch TV or make a phone call because of tinnitus. 10 cases($29.4\%$) complained about depression. 7. Factors increasing severity of tinnitus: ⅰ) fatigue: 18cases($52.9\%$) ⅱ) stress/ tension: 10 cases($29.4\%$) ⅲ) alcohol and tobacco: 5cases($l4.7\%$) 8. Classification through Byeonjeung : ⅰ) 19 cases($55.9\%$) were classified as showing Deficiency syndrome. ⅱ) 15 cases($44.l\%$) were classified as showing Excess syndrome. The deficiency of Qi was 7($20.6\%$), deficiency of Xue, 8($23.5\%$) and insufficiency of the Kidney Yin & Yang, 4($11.8\%$). The flare of Liver fire was 8($23.5\%$) and phlegm-fire, 7($20.6\%$), 9. The efficacy of treatments showed: an improvement in 17cases($50.0\%$); no real improvement or changes in 13 cases($38.2\%$); and some worsening in 4 cases($11.8\%$). In the group with deficiency in Qi, 4($57.1\%$) improved, 1($14.3\%$) showed no change and 2($28.6\%$) were aggravated. In the cases of deficiency in Xue, 6($75.0\%$) improved, 2($25.0\%$) showed no change. In the cases of insufficiency of Kidney Yin & Yang, 3($75.0\%$) showed no change and 1($25.0\%$) were aggravated. In the group of flare of Liver fire, 4($50.0\%$) improved, 3($37.5\%$) no change and 1($12.5\%$) were aggravated. In the cases of phlegm-fire, 3($42.9\%$) improved, 4($57.1\%$) showed no change. Conclusion: We would recommend that any further studies of tinnitus utilize trial treatments of longer than 2 months duration, as any positive effects observed in our study showed that improvement occurred fairly slowly. And we suggest that this study could be utilized as a reference for clinical Oriental Medical treatment of tinnitus. If we try to apply music or sound therapy treatment properly combined with ours, we expect it to provide psycological stability in addition to inducing masking effects, even though it may not directly decrease or completely remove tinnitus.

  • PDF

Application of Amplitude Demodulation to Acquire High-sampling Data of Total Flux Leakage for Tendon Nondestructive Estimation (덴던 비파괴평가를 위한 Total Flux Leakage에서 높은 측정빈도의 데이터를 획득하기 위한 진폭복조의 응용)

  • Joo-Hyung Lee;Imjong Kwahk;Changbin Joh;Ji-Young Choi;Kwang-Yeun Park
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.27 no.2
    • /
    • pp.17-24
    • /
    • 2023
  • A post-processing technique for the measurement signal of a solenoid-type sensor is introduced. The solenoid-type sensor nondestructively evaluates an external tendon of prestressed concrete using the total flux leakage (TFL) method. The TFL solenoid sensor consists of primary and secondary coils. AC electricity, with the shape of a sinusoidal function, is input in the primary coil. The signal proportional to the differential of the input is induced in the secondary coil. Because the amplitude of the induced signal is proportional to the cross-sectional area of the tendon, sectional loss of the tendon caused by ruptures or corrosion can be identified by the induced signal. Therefore, it is important to extract amplitude information from the measurement signal of the TFL sensor. Previously, the amplitude was extracted using local maxima, which is the simplest way to obtain amplitude information. However, because the sampling rate is dramatically decreased by amplitude extraction using the local maxima, the previous method places many restrictions on the direction of TFL sensor development, such as applying additional signal processing and/or artificial intelligence. Meanwhile, the proposed method uses amplitude demodulation to obtain the signal amplitude from the TFL sensor, and the sampling rate of the amplitude information is same to the raw TFL sensor data. The proposed method using amplitude demodulation provides ample freedom for development by eliminating restrictions on the first coil input frequency of the TFL sensor and the speed of applying the sensor to external tension. It also maintains a high measurement sampling rate, providing advantages for utilizing additional signal processing or artificial intelligence. The proposed method was validated through experiments, and the advantages were verified through comparison with the previous method. For example, in this study the amplitudes extracted by amplitude demodulation provided a sampling rate 100 times greater than those of the previous method. There may be differences depending on the given situation and specific equipment settings; however, in most cases, extracting amplitude information using amplitude demodulation yields more satisfactory results than previous methods.

Detection of Wildfire Burned Areas in California Using Deep Learning and Landsat 8 Images (딥러닝과 Landsat 8 영상을 이용한 캘리포니아 산불 피해지 탐지)

  • Youngmin Seo;Youjeong Youn;Seoyeon Kim;Jonggu Kang;Yemin Jeong;Soyeon Choi;Yungyo Im;Yangwon Lee
    • Korean Journal of Remote Sensing
    • /
    • v.39 no.6_1
    • /
    • pp.1413-1425
    • /
    • 2023
  • The increasing frequency of wildfires due to climate change is causing extreme loss of life and property. They cause loss of vegetation and affect ecosystem changes depending on their intensity and occurrence. Ecosystem changes, in turn, affect wildfire occurrence, causing secondary damage. Thus, accurate estimation of the areas affected by wildfires is fundamental. Satellite remote sensing is used for forest fire detection because it can rapidly acquire topographic and meteorological information about the affected area after forest fires. In addition, deep learning algorithms such as convolutional neural networks (CNN) and transformer models show high performance for more accurate monitoring of fire-burnt regions. To date, the application of deep learning models has been limited, and there is a scarcity of reports providing quantitative performance evaluations for practical field utilization. Hence, this study emphasizes a comparative analysis, exploring performance enhancements achieved through both model selection and data design. This study examined deep learning models for detecting wildfire-damaged areas using Landsat 8 satellite images in California. Also, we conducted a comprehensive comparison and analysis of the detection performance of multiple models, such as U-Net and High-Resolution Network-Object Contextual Representation (HRNet-OCR). Wildfire-related spectral indices such as normalized difference vegetation index (NDVI) and normalized burn ratio (NBR) were used as input channels for the deep learning models to reflect the degree of vegetation cover and surface moisture content. As a result, the mean intersection over union (mIoU) was 0.831 for U-Net and 0.848 for HRNet-OCR, showing high segmentation performance. The inclusion of spectral indices alongside the base wavelength bands resulted in increased metric values for all combinations, affirming that the augmentation of input data with spectral indices contributes to the refinement of pixels. This study can be applied to other satellite images to build a recovery strategy for fire-burnt areas.

The design of the high efficiency DC-DC Converter with Dynamic Threshold MOS switch (Dynamic Threshold MOS 스위치를 사용한 고효율 DC-DC Converter 설계)

  • Ha, Ka-San;Koo, Yong-Seo;Son, Jung-Man;Kwon, Jong-Ki;Jung, Jun-Mo
    • Journal of IKEEE
    • /
    • v.12 no.3
    • /
    • pp.176-183
    • /
    • 2008
  • The high efficiency power management IC(PMIC) with DTMOS(Dynamic Threshold voltage MOSFET) switching device is proposed in this paper. PMIC is controlled with PWM control method in order to have high power efficiency at high current level. DTMOS with low on-resistance is designed to decrease conduction loss. The control parts in Buck converter, that is, PWM control circuits consist of a saw-tooth generator, a band-gap reference circuit, an error amplifier and a comparator circuit as a block. The Saw-tooth generator is made to have 1.2 MHz oscillation frequency and full range of output swing from ground to supply voltage(VDD:3.3V). The comparator is designed with two stage OP amplifier. And the error amplifier has 70dB DC gain and $64^{\circ}$ phase margin. DC-DC converter, based on Voltage-mode PWM control circuits and low on-resistance switching device, achieved the high efficiency near 95% at 100mA output current. And DC-DC converter is designed with LDO in stand-by mode which fewer than 1mA for high efficiency.

  • PDF

Design of PWM-Based Photo Irradiation System for Acne Treatment (여드름 치료를 위한 PWM 기반 광 조사 시스템 설계)

  • Kim, Chang-Su;Lim, Hyun-Soo
    • Journal of the Korean Society of Radiology
    • /
    • v.6 no.3
    • /
    • pp.207-215
    • /
    • 2012
  • As one of photo dynamic therapies, the existing LED photo irradiation method with 635 nm continuous wave has most frequently been used for acne treatment, it suffered from a low energy efficiency and generation of a large amount of heat in tissues requiring improvement measures. In this thesis, a LED photo irradiation system for acne treatment has been designed using PWM(Pulse Width Modulation) mode to enhance the energy efficiency and prevent thermal destruction in tissues. System configuration consisting largely of timer module, PWM module, and photo transfer device has been designed with the use of 1 W LED at a wavelength of 660 nm for the photo transfer device to increase skin penetration depth for treatment of acne. Frequency and wave form generated by using PWM control was verified along with confirmation of output energy of 660 nm LED and surface temperatures of tissues, followed by evaluation of stable energy outputs and stability of tissues. The results indicated that whereas power loss was high and thermal destruction in tissues was exhibited when C.W mode was used to obtain the optical energy of 1 W LED at a wavelength of 660 nm for acne treatment, realization of PWM mode allowed lowering of power consumption for LED through pulse width modulation, and no occurrence of thermal destruction in tissues, suggesting that PWM mode is safer and more effective for treatment of acne than C.W mode.

Lifejcket-Integrated Antenna for Search and Rescue System (탐색 및 구조 시스템용 구명조끼 내장형 안테나)

  • Lim, Ji-Hun;Yang, Gyu-Sik;Jung, Sung-Hun;Park, Dong-Kook
    • Journal of Navigation and Port Research
    • /
    • v.38 no.4
    • /
    • pp.367-371
    • /
    • 2014
  • When the crew or passengers fall into the water due to marine accident of vessel, it is very important to rescue them quickly. In the case of marine accidents, most people in distress have been wearing a lifejacket, so if the GPS and Cospas-Sarsat communication module will be integrated within the lifejacket, it is easy to rescue them. In this paper, development of the dual band lifejacket-integrated antenna for GPS and Cospas-Sarsat communication is discussed. The antenna with the FR-4 substrate of 0.2mm thickness for flexibility was designed that it can be fitted close to the shoulder of the life jacket and operate at 1.575GHz and 406MHz. The GPS communication antenna was implemented with a ring-slot antenna having a circular polarized characteristic and a meander type linear polarized antenna is used as Cospas-Sarsat communication. The two antennas are fed by a single microstrip line and an open stub is used to minimize the mutual interference between the two antennas. The performance of the fabricated antenna attached to the life vest is confirmed by the measurement of the return loss at GPS and Cospas-Sarsat frequency bands.

Modification of Radiation Response in Mice by Dongchongxiacao(Paecilomyces japonica) (고선량 및 저선량 방사선 조사 마우스에서 누에동충하초(Paecilomyces japonica)의 효과)

  • Kim, Se-ra;Oh, Heon;Lee, Hae-june;Shin, Dong-ho;Kim, Jong-choon;Park, In-chul;Oh, Ki-seok;Jo, Sung-kee;Kim, Sung-ho
    • Korean Journal of Veterinary Research
    • /
    • v.43 no.2
    • /
    • pp.181-188
    • /
    • 2003
  • Cordyceps has a reputation for its broad biological activities and as a tonic which replenishs vital function in Chinese traditional medicines. As an attempt to obtain fundamental data for the development of new type Cordyceps, the effects of the fruiting bodies of cultivated fungus of Paecilomyces japonica grown on silkworm larvae on radiationinduced damages were investigated. We performed this study to determine the effect of Dongchongxiacao (Paecilomyces japonica) on jejunal crypt survival, endogenous spleen colony formation, and apoptosis in jejunal crypt cells and hair follicles of mice irradiated with high and low dose of gamma-radiation. Treatment with Dongchongxiacao showed no significant modifying effects on the jejunal crypt survival and endogenous spleen colony formation. The frequency of radiationinduced apoptosis was reduced by pretreatment of Dongchongxiacao (i.p.: 50 mg/kg of body weight, at 12 and 36 hours before irradiation, p<0.01). The spontaneous levels of apoptotic cells are $0.082{\pm}0.041$ in intestinal crypts and $0.231{\pm}0.084$ per hair follicle section of skin. Pretreatment of Dongchongxiacao was associated with decreases of 26.86% in intestinal crypt and 66.36% in hair follicle decrease in the number of cells with nuclei positively stained for apoptosis compared with the irradiation control group. We demonstrated for the first time that Dongchongxiacao administration could reduce the extent of apoptosis produced by radiation in the hair follicle. The results presented herein that Dongchongxiacao given before irradiation is capable of reducing the severity of cell loss as a result of apoptosis.

Pyrolysis and Combustion Characteristics of an Pinus densiflora for the Protection of Forest Resources (산림자원 보호를 위한 적송의 열분해 및 연소 특성 연구)

  • Park, Jin-Mo;Kim, Seung-Soo
    • Applied Chemistry for Engineering
    • /
    • v.21 no.6
    • /
    • pp.664-669
    • /
    • 2010
  • The forest area of domestic is 6370304 ha, which covers 70% of the whole country, and especially Gangwon-do is remarkably larger than other Province. A thick forest of the country has the most basic component among other natural environments as well as it has invaluable worth to human being such as scientific research and educational value. However due to the breakout of forest fire since 1990s, the loss of trees, destruction of natural environment and ecology, economic damage have been occurring and its scale also has become larger. The causes of becoming larger in scale are resulted from forest components which mainly consist of needle leaf trees, wide leaf trees, fallen leaves, herbaceous plants so that it has been a direct cause for forest fire. However, few research on combustion and pyrolysis characteristics has been done in domestic and abroad. The study on the combustion and pyrolysis for Pinus densiflora which are typical needle leaf trees has been tried using TGA. Pinus desiflora started to being ignited at around $162^{\circ}C$ and pyrolysis was done at around $197^{\circ}C$. Differential method was applied to calculate activation energy and frequency factor according to the variation of conversion. Activation energy in pyrolysis was increased from 79 kJ/mol to 487 kJ/mol with increasing conversion and average activation energy was 195 kJ/mol. The activation energy in combustion was decreased from 148 kJ/mol to 133 kJ/mol.

Mixed-mode simulation of transient characteristics of 4H-SiC DMOSFETs - Impact off the interface changes (Mixde-mode simulation을 이용한 4H-SiC DMOSFETs의 계면상태에서 포획된 전하에 따른 transient 특성 분석)

  • Kang, Min-Seok;Choe, Chang-Yong;Bang, Wook;Kim, Sang-Chul;Kim, Nam-Kyun;Koo, Sang-Mo
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2009.11a
    • /
    • pp.55-55
    • /
    • 2009
  • Silicon Carbide (SiC) is a material with a wide bandgap (3.26eV), a high critical electric field (~2.3MV/cm), a and a high bulk electron mobility (${\sim}900cm^2/Vs$). These electronic properties allow high breakdown voltage, high frequency, and high temperature operation compared to Silicon devices. Although various SiC DMOSFET structures have been reported so far for optimizing performances. the effect of channel dimension on the switching performance of SiC DMOSFETs has not been extensively examined. In this paper, we report the effect of the interface states ($Q_s$) on the transient characteristics of SiC DMOSFETs. The key design parameters for SiC DMOSFETs have been optimized and a physics-based two-dimensional (2-D) mixed device and circuit simulator by Silvaco Inc. has been used to understand the relationship with the switching characteristics. To investigate transient characteristic of the device, mixed-mode simulation has been performed, where the solution of the basic transport equations for the 2-D device structures is directly embedded into the solution procedure for the circuit equations. The result is a low-loss transient characteristic at low $Q_s$. Based on the simulation results, the DMOSFETs exhibit the turn-on time of 10ns at short channel and 9ns at without the interface charges. By reducing $SiO_2/SiC$ interface charge, power losses and switching time also decreases, primarily due to the lowered channel mobilities. As high density interface states can result in increased carrier trapping, or recombination centers or scattering sites. Therefore, the quality of $SiO_2/SiC$ interfaces is important for both static and transient properties of SiC MOSFET devices.

  • PDF