• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.590-593
• /
• 2002

Using two- and three-dimensional fluid simulation codes, we have suggested several new plasma display panel (PDP) cell structures that have high luminous efficiency compared with conventional structure. To improve the luminance and discharge efficiency, we utilize long discharge path, lower electric field region, and reduction of power consumption by adding one auxiliary electrode or reducing the electrode area. Consequently, luminous efficiency increases about 1.8 times. Furthermore for the resonance radiation trapping effect in PDP system, we have described a self-consistent radiation transport model coupled with fluid simulation using modified Holstein's equation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.189-190
• /
• 2000

A plasma display panel(PDP) with a new discharge cells are investigated electrically and optically. These cells have the structure of a long discharge path length and a small electrode area. They have shown a higher luminous efficiency and a lower power consumption about $30{\sim}40%$ improvement than the conventional standard ac PDP cells.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.605-608
• /
• 2007

The discharge characteristics of the face-to-face sustain electrode structure employing auxiliary address pulse are investigated under a sustain driving frequency of 20 kHz and various auxiliary address pulse widths (500 ns, $1{\mu}s$, $2\;{\mu}s$) in the 6-in. test panel (42-in. Full HD grade) with a pressure of 450 Torr and a 4 % Xe-content. The luminance and the luminous efficiency at the auxiliary address pulse width of 500 ns are improved more than these of $1\;{\mu}s$ and $2\;{\mu}s$. At the auxiliary address pulse width of 500 ns, the luminous efficiency shows about 0.96 lm/W at the auxiliary pulse of 90 V and the sustain voltage of 260 V.

• Nuclear Engineering and Technology
• /
• v.28 no.3
• /
• pp.257-264
• /
• 1996

The conventional Equipment Environment Qualification (EEQ) envelope is developed based on the containment responses during the design basis events. The Safety Depressurization System (SDS) design without In-containment Refueling Water Storage Tank (IRWST) adopted in the Ulchin 3&4 challenges the conventional EEQ envelope during long term Feed and Bleed (F&B) operation due to the direct discharge of high mass and energy into the containment. Therefore, it is necessary to confirm that the containment pressure and temperature history during the long term F&B operation does not violate the conventional EEQ envelope. However, this subject has never been quantitatively assessed before. To investigate the success path of long term F&B operation this paper analyzes the thermal hydraulic response of the containment and Reactor Coolant System (RCS) until the completion of depressurization and cooldown of RCS into Shutdown Cooling System (SCS) entry condition. It is found that the SCS entry condition can be reached within 6 hours without violating the EEQ curve by proper operation of SDS valves, High Pressure Safety Injection (HPSI) pumps and active Containment Heat Removal System (CHRS). The suggested strategy not only demonstrates the feasibility of long term F&B operation but also can be utilized in the preparation of Emergency Procedure Guidelines (EPGs)

• Journal of Electrochemical Science and Technology
• /
• v.12 no.2
• /
• pp.285-295
• /
• 2021

The inverse spinel Cobalt ferrite (CoFe₂O₄, CFO) is considered to be a promising alternative to commercial graphite anodes for lithium ion batteries (LIBs). However, the further development of CFO is limited by its unstable structure during battery cycling and low electrical conductivity. In an effort to address the challenge, we construct three-dimensional hierarchical flower-like CFO nanoclusters (CFO NCs)-decorated carbonized cotton carbon fiber (CFO NCs/CCF) composite. This structure is consisted of microfibers and nanoflower cluster composited of CFO nanoparticle, in which CCF can be used as a long-range conductive matrix, while flower-like CFO NCs can provide abundant active sites, large electrode/electrolyte interface, short lithium ion diffusion path, and alleviated structural stress. As anode materials in LIBs, the flower-like CFO NCs/CCF exhibits excellent electrochemical performance. After 100 cycles at a current density of 0.3 A g^-1, the CFO NCs/CCF delivers a discharge/charge capacity of 1008/990 mAh g^-1. Even at a high current density of 15 A g^-1, it still maintains a charge/discharge capacity of 362/361 mAh g^-1.

• The Journal of Korean Society for School & Community Health Education
• /
• v.20 no.2
• /
• pp.69-80
• /
• 2019

Objectives: In this study, we tried to analyze the factors affecting Length Of Stay for serious patients in Republic of Korea. Methods: The study included 139,172 serious patients in the 2012-2016 discharge details. Using the SPSS 23.0 program, we conducted a rank regression analysis with social and social demographic characteristics as control variables, medical institution characteristics and medical use characteristics as independent variables, and Average Length Of Stay as a dependent variable. Results: Average Length Of Stay for participants was found to be 9.92days. And the location and bed size of medical institutions were not statistically significant, the hospitalization path was more urgent(B=0.43) than the outpatient (p<0.001), and there was no secondary diagnosis(B=0.35). However, Average Length Of Stay was higher (p<0.001) than there was no main surgery(B=0.80). After discharge, Average Length Of Stay for funding(B=0.43) and death(B=0.72) was long (p<0.001). Average Length Of Stay for participants was found to be 9.92days. And the location and the bed size of the medical institution were not statistically significant, and the hospitalization pass had longer Length Of Stay for emergency patients(B=0.43) than for outpatients(p<0.001). There was a longer Length Of Stay(B=0.35) than none was diagnosed. There were longer Length Of Stay(p<0.001) than there was no major surgery(B=0.80). After discharge, the outpatients had longer Average Length Of Stay(B=0.43) and deaths(B=0.72) than those who returned home(p<0.001). Conclusion: As a result of analyzing the factors affecting Average Length Of Stay of the participants, it was confirmed that regardless of the location and bed size of medical institutions, hospitalization route, department diagnosis, main surgery, and whereabouts after discharge. Therefore, appropriate interventions and necessary support must be provided so that efficient Length Of Stay can be managed according to the medical use characteristics of serious patient.