• The Korean Journal of Mycology
• /
• v.26 no.3 s.86
• /
• pp.396-398
• /
• 1998

This study was carried out to obtain the basic data for artificial production of Polyporus umbellatus. Among logs consisted of 16 tree species, the log of Stylax japonica inoculated with Polyporus umbellatus not only produced compact sclerotia of $3{\sim}5\;mm$ in their diameters but resulted in the good mycelial density. Also, the sclerotia were observed on 6 different kinds of logs inoculated with Polyporus umbellatus.

• Journal of Korea Multimedia Society
• /
• v.18 no.1
• /
• pp.42-51
• /
• 2015

In this paper, we analyze the quality status of Health and Welfare division's standardized log and asses the characteristics of the institutions' logs analysis to establish the criteria to minimize hazards and control the quality of log's institutional details to limit extraction. As a result, extraction condition's proposed development direction to adequately assess and control health and welfare abuses privacy control target log. This improvement over the status and quality of information shared with relation to institutional work of the log quality characteristics is made possible. In addition, quality control and inspection standards were prepared in accordance with the institutional log characteristics. Future research will include performing continuous analysis and improvement activities on the quality of logs with integrated control of sharing personal information and distributing information about logs' quality to proactively target organ. Therefore, we expect that correcting proactive personal information misuse and leakage is possible to achieve.

• Journal of Information Processing Systems
• /
• v.17 no.4
• /
• pp.851-865
• /
• 2021

Enterprise networks in the PyeongChang Winter Olympics were hacked in February 2018. According to a domestic security company's analysis report, attackers destroyed approximately 300 hosts with the aim of interfering with the Olympics. Enterprise have no choice but to rely on digital vaccines since it is overwhelming to analyze all programs executed in the host used by ordinary users. However, traditional vaccines cannot protect the host against variant or new malware because they cannot detect intrusions without signatures for malwares. To overcome this limitation of signature-based detection, there has been much research conducted on the behavior analysis of malwares. However, since most of them rely on a sandbox where only analysis target program is running, we cannot detect malwares intruding the host where many normal programs are running. Therefore, this study proposes a method to detect malware variants in the host through logs rather than the sandbox. The proposed method extracts common behaviors from variants group and finds characteristic behaviors optimized for querying. Through experimentation on 1,584,363 logs, generated by executing 6,430 malware samples, we prove that there exist the common behaviors that variants share and we demonstrate that these behaviors can be used to detect variants.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.8
• /
• pp.4108-4122
• /
• 2019

Workflow process mining is becoming a more and more valuable activity in workflow-supported enterprises, and through which it is possible to achieve the high levels of qualitative business goals in terms of improving the effectiveness and efficiency of the workflow-supported information systems, increasing their operational performances, reducing their completion times with minimizing redundancy times, and saving their managerial costs. One of the critical challenges in the workflow process mining activity is to devise a reasonable approach to discover and recognize the bottleneck points of workflow process models from their enactment event histories. We have intuitively realized the fact that the iterative process pattern of redo-activities ought to have the high possibility of becoming a bottleneck point of a workflow process model. Hence, we, in this paper, propose an algorithmic approach and its implementation to discover the redo-activities and their performers' involvements patterns from workflow process enactment event logs. Additionally, we carry out a series of experimental analyses by applying the implemented algorithm to four datasets of workflow process enactment event logs released from the BPI Challenges. Finally, those discovered redo-activities and their performers' involvements patterns are visualized in a graphical form of information control nets as well as a tabular form of the involvement percentages, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.4
• /
• pp.1-7
• /
• 2004

The change in surface temperature of woodceramics, made from thinned logs of Pinus densiflora, were investigated, by the impregnation ratio and carbonizing temperature. As the surface temperature of silicon rubber heater was going up, that of woodceramics also increase rapidly. In case of heaters surface temperature at 70℃, the surface temperature of woodceramics was 53.9℃ when a sample was the impregnation ratio of 80%, while it was 54.2℃ when a sample was at 1,000℃ in carbonizing temperature, showing the highest. Also, it was found that woodceramics maintained heat for a long time because the descending velocity of their surface temperature was lower than that of the heater.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.3
• /
• pp.59-65
• /
• 2002

EYM (European Yield Model), which was adopted in NDS (National Design Specification for wood construction), has been used in Korea without any verification of the analysis of bolted wood connections. In the case of applying lumber from domestic small diameter logs, however, there are some problems with the direct application of EYM ; 1) relatively low dowel bearing strength and dimensional stability due to a large amount of immature wood, 2) effect of MC (moisture contents) on the dowel bearing strength of wood and the yield load of a bolted connection. To evaluate the strength properties of bolted connections with lumber from domestic small diameter logs, effect of MC on the dowel bearing strength of wood was investigated and double shear bolted connection tests were performed. As the MC of wood increased, the dowel bearing strength was linearly reduced, even under 19% MC, which showed that adjustment, not considered in NDS, was required. Double shear bolted connection tests indicated that effect of MC on yield load should be considered in order to determine design value.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.4
• /
• pp.115-127
• /
• 2019

The low-flow grouting injection technique, the target construction method for this study, is a method of pouring mortar into the ground by non-emission replacement principle, which can be expected to increase the density of the ground, and, in some cases, be used as a base file using the strength of the high injection solids, along with low noise, low pollution, and high durability. To verify that the dynamic characteristics of the ground are improved by the low-flow injection technique, the test work was conducted on the site and physical tests were performed, and the quality of the improvement formed in the ground was verified through the indoor test on the core and core recovery rate was analyzed. The density logs test layer calculated the volume density of the ground layer by using the Compton scattering of gamma-rays, and the sonic logs was tested on the ground around the drill hole using a detector consisting of sonar and receiver devices inside the drill hole. As a result of the measurement of the change in physical properties (density and sonic logs) before and after grouting, both properties were basically increased after infusion of grout agent. However, the variation in density increase was greater than the increase in speed after grouting, and the ground density measurement method was thought to be effective in measuring the fill effect of the filler. Strength and core recovery rates were measured from specimens taken after the age of 28 days, and the results of the test results of the diffusion and strength test of the improved products were verified to satisfy the design criteria, thereby satisfying the seismic performance reinforcement.

• Korean journal of applied entomology
• /
• v.48 no.2
• /
• pp.189-195
• /
• 2009

This study was performed to investigate the emergence timing and daily emergence from the different tree species logs (Korean white pine, Pine, and Japanese larch) at Cheongwon, Chungcheongbuk-do from 2006 to 2008. Pine sawyer adults began to emerge on early May (2${\sim}$10th day) and finished on mid-June (4${\sim}$20th day) in the Korean white pine and pine logs. However, pine sawyer adults began to emerge on mid-May (13th day) and finished late May (27th day) in Japanese larch logs, Japanese larch logs shows shorter emergence timing of pine sawyer adult compare to those of other two tree species. Emergence timing shows no difference between males and females. Sex ratios of emerged adult in 2007 were 0.55 from Korean white pine, 0.46 from Pine, and 0.59 from Japanese larch; it shows no difference among tree species. Female and male adults emerged throughout 24 hrs; 22.8% of the total adults emerged from 12${\sim}$14:00 (22.8%) and adults emerged lowest from 06${\sim}$08:00. Of the adults emerged from the logs, 98.9% was univoltine and the rest was biennial which emerged next year.

• Korean Journal of Plant Resources
• /
• v.18 no.3
• /
• pp.512-517
• /
• 2005

To establish the economical cultivation method of Gastrodia elata Blume by controlling the shading rate and the mixing ratio of recycling spawn bed logs, a serial experiment was carried out. When G. elata was grown in the field with no shading, the yield of spawn tuber was higher than that of tuber of G. elata. The yield of G. elata was high in the rainproof green house covered with one layer of $95\%$ shading net, in the rainproof green house covered with two layers of $95\%$ shading net, and in the field with no shading, in that order. In the case of mixing ratio of recycling spawn bed logs, the yield was high in the fresh logs, in the mixing ratio of 2:1, and the ratio of 1:1, in that order. The income of the rainproof green house covered with one layer of $ 95\%$ shading net which brought the best yield was $81\%$ in the mixing ratio of 2:1 over the fresh logs.

• Journal of Korean Society of Forest Science
• /
• v.104 no.2
• /
• pp.221-229
• /
• 2015

The purpose of study was to broaden our knowledge on the productivity and cost of thinning operations which has become increasingly practiced in Korea. The thinning operations were conducted in a 40-year old larch (Larix leptolepis) stand, including chainsaw felling and processing at the stump, followed by yarding tree-length logs using a Koller K301-4 tower yarder. The logs were further processed and sorted into 1.8 m and 3.6 m log piles at the landing. We used a standard time study method to evaluate key variables that affect the productivity of thinning operations. The total stump-to-pile operational cost was $41,707won/m^3$. The highest cost activity was the yarding phase which cost $20,083won/m^3$ (48.2% of the total cost), followed by the costs of processing treelength materials into marketable log lengths ($12,143won/m^3$; 29.1%), and then by the costs of sorting/piling the processed logs ($5,039won/m^3$; 12.1%). It was interesting to see that felling and processing trees at the stump had low costs at $1,315won/m^3$ (3.2%) and $3,127won/m^3$ (7.5%), respectively. We used the detailed time study data to develop regression equations which were to predict yarding productivity. Our analysis showed that harvesting system cost was highly sensitive to the number of logs, yarding distance and lateral distance per turn, respectively.