• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.66.1-66.1
• /
• 2012

Although all printed cost-less radio frequency identification (RFID) tags have been considered as a core tool for bringing up a ubiquitous society, the difficulties in integrating thin film transistors (TFTs), diodes and capacitors on plastic foils using a single in-line printing method nullify their roles for the realization of the ubiquitous society1,2. To prove the concept of all printed cost-less RFID tag, the practical degree of the integration of those devices on the plastic foils should be successfully printed to demonstrate multi bit RFID tag. The tag contains key device units such as 13.56 MHz modulating TFT, digital logic gates and 13.56 MHz rectifier to generate and transfer multi bit digital codes via a wireless communication (13.56 MHz). However, those key devices have never been integrated on the plastic foils using printing method yet because the electrical fluctuation of fully printed TFTs and diodes on plastic foils could not be controlled to show the function of desired devices. In this work, fully gravure printing process in printing 13.56 MHz operated 32 bit RFID tags on plastic foils has been demonstrated for the first time to prove all printed RFID tags on plastic foils can wirelessly generate and transfer 32 bit digital codes using the radio frequency of 13.56 MHz. This result proved that the electrical fluctuations of printed TFTs and diodes on plastic foils should be controlled in the range of maximum 20% to properly operate 32 bit RFID tags.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제53권3호
• /
• pp.413-434
• /
• 2014

Logic lays the foundation of Mathematics and the development of Mathematics is dependent on critical thinking. So it is important that school mathematics helps students develop their logical and critical thinking ability for both mathematics learning and problem solving in general. MINDSTORMS, a LEGO based programming activity kit, is an effective teaching and learning tool that can be used to enhance logical and critical thinking in students. This study focused on measuring the growth of students' ability to think logically and critically when they used MINDSTORMS activities to learn programming. In addition, we investigated how the students' logical and critical thinking changed from the MINDSTORMS learning experience. The study confirmed that the programming activities using MINDSTORMS help to enhance logical and critical thinking in students. The students attitude about logical and critical thinking became more positive and the activities helped to engage students to think logically and critically. This type of programming activities should be valuable in mathematics education and it should be included in a general mathematics curriculum.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제12권4호
• /
• pp.229-240
• /
• 2006

개량형 경보시스템은 원자력 플랜트의 경보 기능을 구현하기 위하여 최신 디지털 기술들을 적용한다. 신호검증 및 선진 경보처리 기술들을 제공하는 디지털 신기술의 사용은 제어실 운전원 연계를 향상시킨다. 본 논문은 원자력 플랜트의 개량형 경보시스템의 설계 공정, 신뢰도 예측 도구를 이용한 시스템 신뢰도 및 가용도 향상 평가, 인간공학적 성능 관점의 설계 전략 그리고 검증설비를 이용한 성능 분석의 결과 등과 같은 실제적인 구현 사례를 소개한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 ICEIC The International Conference on Electronics Informations and Communications
• /
• pp.199-203
• /
• 2004

In this paper, we only describe the digital block of two-channel 18-bit analog-to-digital (A/D) converter employing sigma-delta method and xl28 decimation. The device contains two fourth comb filters with 1-bit input from sigma­delta modulator. each followed by a digital half band FIR(Finite Impulse Response) filters. The external analog sigma-delta modulators are sampled at 6.144MHz and the digital words are output at 48kHz. The fourth-order comb filter has designed 3 types of ways for optimal power consumption and signal-to-noise ratio. The following 3 digital filters are designed with 12tap, 22tap and 116tap to meet the specification. These filters eliminate images of the base band audio signal that exist at multiples of the input sample rate. We also designed these filters with 8bit and 16bit filter coefficient to analysis signal-to-noise ratio and hardware complexity. It also included digital output interface block for I2S serial data protocol, test circuit and internal input vector generator. It is fabricated with 0.35um HYNIX standard CMOS cell library with 3.3V supply voltage and the chip size is 2000um by 2000um. The function and the performance have been verified using Verilog XL logic simulator and Matlab tool.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제9권2호
• /
• pp.99-104
• /
• 2009

The turn-to-turn short is one major fault of the motor faults of BLDC motors and can appear frequently. When the fault happens, the motor can be operated without breakdown, but it is necessary to maintain the motor for continuous working. In past research, several methods have been applied to detect winding faults. The representative approaches have been focusing on current signals, which can give important information to extract features and to detect faults. In this study, current sensors were installed to measure signals for fault detection of BLDC motors. In this study, the Park's vector method was used to extract the features and to isolate the faults from the current measured by sensors. Because this method can consider the three-phase current values, it is useful to detect features from one-phase and three-phase faults. After extracting two-dimensional features, the final feature was generated by using the two-dimensional values using the distance equation. The values were used in fuzzy similarity to isolate the faults. Fuzzy similarity is an available tool to diagnose the fault without model generation and the fault was converted to the percentage value that can be considered as possibility of the fault.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제13권4호
• /
• pp.315-323
• /
• 2013

Vessel Traffic Service (VTS) is being used at ports and in coastal areas of the world for preventing accidents and improving efficiency of the vessels at sea on the basis of "IMO RESOLUTION A.857 (20) on Guidelines for Vessel Traffic Services". Currently, VTS plays an important role in the prevention of maritime accidents, as ships are required to participate in the system. Ships are diversified and traffic situations in ports and coastal areas have become more complicated than before. The role of VTS operator (VTSO) has been enlarged because of these reasons, and VTSO is required to be clearly aware of maritime situations and take decisions in emergency situations. In this paper, we propose a prediction table to improve the work of VTSO through the Cognitive Work Analysis (CWA), which analyzes the VTS work very systematically. The required data were collected through interviews and observations of 14 VTSOs. The prediction tool supports decision-making in terms of a proactive measure for the prevention of maritime accidents.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 추계종합학술대회
• /
• pp.648-651
• /
• 2001

본 논문에서는 위성방송용으로 제안되고 있는 GF(2$^{8}$ )상의 8중 오류정정 (204, 188) Reed-Solomon 복호기를 설계하고 CMOS 라이브러리를 이용하여 합성하였다. Reed-Solomon 부호의 복호 알고리즘은 오증을 계산하고, 오류위치 다항식을 추한 후, 오류를 판단하여, 오류치를 구하는 4단계로 이루어 지는데, 본 논문에서는 Modified Euclid 알고리즘을 사용하여 설계가 이루어졌다. 먼저, 알고리즘과 회로의 동작을 확인하기 위해 C++로 프로그램을 작성하여 검증을 한 후, 이를 바탕으로 VLSI 설계를 위해서 Verilog HDL로 하드웨어를 기술하였다. 또한, 각 블록에 대한 로직 시뮬레이션을 거친 후, 최종적으로 Synopsys사의 합성 툴을 이용해서 회로를 합성하였다.

• 한국공작기계학회논문집
• /
• 제18권1호
• /
• pp.59-67
• /
• 2009

The purpose of this study is to provide a decision support to select an appropriate layered manufacturing(LM) machine that suits the application of a part. Selection factors include concept model, form/fit/functional model, pattern model far molding, material property, build time and part cost that greatly affect the performance of LM machines. However, the selection of a LM is not an easy decision because they are uncertain and vague. For this reason, the aim of this research is to propose hybrid multiple attribute decision making approaches to effectively evaluate LM machines. In addition, because subjective considerations are relevant to selection decision, a fuzzy logic approach is adopted. The proposed selection procedure consists of several steps. First, we identify LM machines that the users consider After constructing the evaluation criteria, we calculate the weights of the criteria by applying the fuzzy Analytic Hierarchy Process(AHP) method. Finally, we construct the fuzzy Technique of Order Preference by Similarity to Ideal Solution(TOPSIS) method to achieve the ranking order of all machines providing the decision information for the selection of LM machines.

• 한국공작기계학회논문집
• /
• 제17권2호
• /
• pp.90-96
• /
• 2008

A pneumatic system was proposed to evaluate displacement accuracy of the pneumatic actuator without external load and to analyze capability of integration of the proposed valve system. The proposed pneumatic system consisted of a combination of pneumatic valves, two proximity sensors, and a programmable logic controller(PLC). The position controller is based on the PLC controller connected with the proximity sensors. Displacement accuracy of the pneumatic cylinder stroke was tested by varying air pressures of the supply and discharge-side and strokes of the pneumatic cylinder. The displacement accuracy of the pneumatic cylinder stroke increased as the supply and discharge side of air pressure increased at the stroke length of 133mm. Also the displacement accuracy increased as the stroke length increased with a fixed supply and discharge side of air pressure of the pneumatic cylinder as 3.5 and $4.5kg/cm^2$, respectively. The most accurate displacement of the pneumatic cylinder(i.e., standard deviation of 0.01 mm) was obtained at the supply and discharge side of air pressure of 4.0 and $5.0kg/cm^2$, respectively, and strokes of 170 and 190 mm among arbitrarily selected supply and discharge side air pressures and strokes.

• 융합보안논문지
• /
• 제5권1호
• /
• pp.1-9
• /
• 2005

XML은 웹 응용을 위한 데이터의 처리와 전송을 위해 가장 일반적인 툴이 되고 있다. 모든 온라인 비즈니스 솔루션에서 정책들은 광범위하게 사용되고 있으며, 접근 요청에 대한 'yes/no'와 같은 이분법적인 결정은 충분하지 않다고 인식되고 있다. 이 논문에서는 provision과 obligation을 지닌 로직 형식으로 표현하는 정책규칙을 보안정책 프로그래머들이 융통성있게 명시할 수 있고 구현할 수 있도록 XML로 변환하여 표현하는 기법을 개발하였다. 사용자 정보, 객체 정보, 액션들을 XML로 표현하기 위한 일반적인 형식을 정의하였으며, 이 세 요소를 기본 요소로 하여 정책들을 명시하기 위한 XML DTD를 개발하였다. 향후에는 권한부여 정책에 기반한 접근 제어뿐만 아니라 데이터의 성격에 따라 각 필드에 있는 데이터를 변환하고 부인방지 기법을 도입하는 등 다양한 보안 기능을 지원하기 위해 이들을 XML 정책 규칙으로 명시하는 것에 대해 연구하고자 한다.