• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.12
• /
• pp.704-715
• /
• 2004

Recently, a single or multi processor system uses the hierarchical memory structure to reduce the time gap between processor clock rate and memory access time. A cache memory system includes especially two or three levels of caches to reduce this time gap. Moreover, one of the most important things In the hierarchical memory system is the hit rate in level 1 cache, because level 1 cache interfaces directly with the processor. Therefore, the high hit rate in level 1 cache is critical for system performance. A victim cache, another high level cache, is also important to assist level 1 cache by reducing the conflict miss in high level cache. In this paper, we propose the advanced high level cache management scheme based on the processor reuse information. This technique is a kind of cache replacement policy which uses the frequency of processor's memory accesses and makes the higher frequency address of the cache location reside longer in cache than the lower one. With this scheme, we simulate our policy using Augmint, the event-driven simulator, and analyze the simulation results. The simulation results show that the modified processor reuse information scheme(LIVMR) outperforms the level 1 with the simple victim cache(LIV), 6.7% in maximum and 0.5% in average, and performance benefits become larger as the number of processors increases.

• Journal of Biomedical Engineering Research
• /
• v.21 no.4
• /
• pp.373-384
• /
• 2000

The goal of this paper is to develop a computational method to predict cancellous bone density distributions based upon continuum levels of volumetric strain. Volumetric strain is defined as the summation of normal strains, excluding shear strains, within an elastic range of loadings. Volumetric strain at a particular location in a cancellous structure changes with changes of the boundary conditions (prescribed displacements, tractions, and pressure). This change in the volumetric strain is postulated to predict the adaptive change in the bone apparent density. This bone remodeling theory based on volumetric strain is then used with the finite element method to compute the apparent density distribution for cancellous bone in both lumbar spine and proximal femur using an iterative algorithm, considering the dead zone of strain stimuli. The apparent density distribution of cancellous bone predicted by this method has the same pattern as experimental data reported in the literature (Wolff 1892, Keller et al. 1989, Cody et al. 1992). The resulting bone apparent density distributions predict Young's modulus and strength distributions throughout cancellous bone in agreement with the literature (Keller et al. 1989, Carter and Hayes 1977). The method was convergent and sensitive to changes in boundary conditions. Therefore, the computational algorithm of the present study appears to be a useful approach to predict the apparent density distribution of cancellous bone (i.e. a numerical approximation for Wolff's Law)

• Nutrition Research and Practice
• /
• v.10 no.1
• /
• pp.56-66
• /
• 2016

BACKGROUND/OBJECTIVES: Despite successes recorded in combating iodine deficiency, more than 2 billion people are still at risk of iodine deficiency disorders. Rural landlocked and mountainous areas of developing countries are the hardest hit, hence the need to explore and advance novel strategies such as biofortification. SUBJECTS/METHODS: We evaluated adoption, purchase, and consumption of iodine biofortified vegetable legumes (IBVL) using the theory of protection motivations (PMT) integrated with an economic valuation technique. A total of 1,200 participants from three land-locked locations in East Africa were recruited via multi-stage cluster sampling, and data were collected using two, slightly distinct, questionnaires incorporating PMT constructs. The survey also elicited preferences for iodine biofortified foods when offered at a premium or discount. Determinants of protection motivations and preferences for iodine biofortified foods were assessed using path analysis modelling and two-limit Tobit regression, respectively. RESULTS: Knowledge of iodine, iodine-health link, salt iodization, and biofortification was very low, albeit lower at the household level. Iodine and biofortification were not recognized as nutrient and novel approaches, respectively. On the other hand, severity, fear, occupation, knowledge, iodine status, household composition, and self-efficacy predicted the intention to consume biofortified foods at the household level; only vulnerability, self-efficacy, and location were the most crucial elements at the school level. In addition, results demonstrated a positive willingness-to-pay a premium or acceptance of a lesser discount for biofortification. Furthermore, preference towards iodine biofortified foods was a function of protection motivations, severity, vulnerability, fear, response efficacy, response cost, knowledge, iodine status, gender, age. and household head. CONCLUSIONS: Results lend support for prevention of iodine deficiency in unprotected populations through biofortification; however 'threat' appraisal and socio-economic predictors are decisive in designing nutrition interventions and stimulating uptake of biofortification. In principle, the contribution is threefold: 1) Successful application of the integrated model to guide policy formulation; 2) Offer guidance to stakeholders to identify and tap niche markets; 3) stimulation of rural economic growth around school feeding programmes.

• Korean Journal of Construction Engineering and Management
• /
• v.21 no.5
• /
• pp.29-37
• /
• 2020

This study analyzed the importance of factors according to the investor's perspective through a survey of residential real estate experts using AHP and fuzzy theory. Analysis results showed that rent, profitability, traffic accessibility, commercial and infrastructure, and financial regulation are important in common. By expert group, financial and credit groups cited profitability, rent, traffic accessibility, supply and tax benefits, construction and development groups cited traffic accessibility, rent, direct access, profitability, commercial area and infrastructure, and appraisal and evaluation groups cited rent, profitability, transportation accessibility, financial regulation and supply as the most important factors. This showed that it had a preference characteristic that was associated with work. In other words, it focuses most on the financial perspective in investment characteristics, and it values convenience such as accessibility to transportation and commercial districts and infrastructure as its location characteristics. In addition, it was found that easing financial regulations in the market is important to expand investment in real estate. This study aims to help the business feasibility analysis of residential property developers and rational decision-making of general investors who are consumers, taking into account the various perspectives of the expert group.

• Journal of Science and Technology Studies
• /
• v.19 no.3
• /
• pp.291-333
• /
• 2019

The regional innovation policies so far have been separated from the social problems facing the local communities. The regional innovation policies, regarding the region as the location of the business, have focused on the invigoration of business innovation activities. However, as the recent emergence of the new paradigm of innovation policy aiming the sustainability, 'transformative innovation policy,' has led to a search for regional innovation policies that begin with solving the local social problems. This research paper deals with regional innovation theory that starts from searching for solutions and system transformation for social problems such as climate crisis and energy problems. The objective is to present a new framework called 'transformative regional innovation policy' and to improve its content through case studies by combining the results of the transformative innovation policy and the regional innovation policy studies. In particular, the contribution of this paper is to analyze and discuss the concept of the transition platform, which aims to solve the local social problems, through the case studies of Gussing, Austria and Esbjerg, Denmark. Lastly, it discusses the derived implications of the cases applied in Korean society.

• Journal of Radiation Protection and Research
• /
• v.7 no.1
• /
• pp.34-48
• /
• 1982

The prime purpose of this study is to realize an index quantity, absorbed dose index, defined by the ICRU for the characterization of ambient radiation level at any location for the purpose of radiation protection. The experiment has been designed to be carried out in two phases, namely, preliminary and main experiment. In the primary study a 30cm diameter sphere of polyethylene was used, while in the main experiment that of tissue equivalent material was fabricated and used. Both experiments were performed in the gamma-ray fields of $^{137}Cs\;and\;^{60}Co$, and in a neutron beam of thermal column of the TRIGA MARK-II research reactor. In the measurement of gamma-ray absorbed dose TLD-700 $(^{7}LiF)$ chips were used, and for the neutron dose both Au activation foils and TLD chips (TLD-600 $(^{6}LiF)$ and TLD-700 for the discrimination of gamma-ray contribution) were used. Theoretical assessment of the absorbed dose in the sphere phantom has been carried out in accordance with the Ehrlich's idea that deduced on the basis of Burlin's cavity theory in the case of gamma-ray irradiation. For the analysis of neutron dose fluence-KERMA rate conversion method was used. The explanation on the dose assessment is given in detail. Results obtained were numerically and statistically analyzed and the depth dose distributions are presented in the graphic forms with normalized values. In the concluding remarks, the possibility and difficulty of realizing the index quantity, including questions and problems to be solved are mentioned.

• Nuclear Engineering and Technology
• /
• v.42 no.4
• /
• pp.382-393
• /
• 2010

Thermal mixing by steam jets in a pool is dominantly influenced by a turbulent water jet generated by the condensing steam jets, and the proper prediction of this turbulent jet behavior is critical for the pool mixing analysis. A turbulent jet flow induced by a steam jet discharged through a vertical upward single hole into a subcooled water pool was subjected to computational fluid dynamics (CFD) analysis. Based on the small-scale test data derived under a horizontal steam discharging condition, this analysis was performed to validate a CFD method of analysis previously developed for condensing jet-induced pool mixing phenomena. In previous validation work, the CFD results and the test data for a limited range of radial and axial directions were compared in terms of profiles of the turbulent jet velocity and temperature. Furthermore, the behavior of the turbulent jet induced by the steam jet through a horizontal single hole in a subcooled water pool failed to show the exact axisymmetric flow pattern with regards to an overall pool mixing, whereas the CFD analysis was done with an axisymmetric grid model. Therefore, another new small-scale test was conducted under a vertical upward steam discharging condition. The purpose of this test was to generate the velocity and temperature profiles of the turbulent jet by expanding the measurement ranges from the jet center to a location at about 5% of $U_m$ and 10 cm to 30 cm from the exit of the discharge nozzle. The results of the new CFD analysis show that the recommended CFD model of the high turbulent intensity of 40% for the turbulent jet and the fine mesh grid model can accurately predict the test results within an error rate of about 10%. In this work, the turbulent jet model, which is used to simply predict the temperature and velocity profiles along the axial and radial directions by means of the empirical correlations and Tollmien's theory was improved on the basis of the new test data. The results validate the CFD model of analysis. Furthermore, the turbulent jet model developed in this study can be used to analyze pool thermal mixing when an ellipsoidal steam jet is discharged under a high steam mass flux in a subcooled water pool.

• Korean Journal of Heritage: History & Science
• /
• v.35
• /
• pp.28-56
• /
• 2002

There is no definite theory, which archeologists have believed to be built either for the protection or ceremonial purpose, of enclosure historical site exhibited from Bronze Age to Samhan era in Korea. The main conditions of choosing right enclosure were natural levee-backswamp-plateau, which all found in village on a hill. For this reasons Kimhae Daesoeng-dong enclosure discovered in 2001 is not an exception, and therefore this enclosure has been believed to be a beginning point of the farming society. In Korea there have been 2 types of enclosure. One is that enclosure entirely surrounds whole historic site itself and the other is that enclosure partially does. Although Kimhae Daesoeng-dong historic site has been discovered only part of it, it's not believed to have the first type-which surrounds the whole enclosure historic site In this research, 3 developing steps of enclosure historic site were defined. Enclosure surrounds only a part of the historic site is 1st step. Enclosure surrounds all around the site is 2nd step. The site discovered with big round clay pottery and developed into multiple enclosure is 3rd step. Since some researches have not been accomplished, the hypothesis above was suggested to have a better understanding of the development of enclosure historic site. The purpose of enclosure has been separately explained for the protection or for the ceremony. It is difficult to assert that excavation sites could be applied to only one of two purposes. But it is possible that both purposes of enclosure such as protection and as division from ceremonial area could be applied together. Kimhae Daesoeng-dong enclosure was shown for the purpose of division from ceremonial area. But we can not ignore that since Kimhae Daesoeng-dong enclosure exposed to the Sea and dwelling area was not shown from village hill, it would be probably for the protection. However enclosure of Gujibong village area in Daesoeng-dong had used for ceremonial purpose since the Bronze Age, even this enclosure would be possible to play an important role of being a center of legend of Gaya foundation. Many unsolved questions are still lying ahead. The enclosure was used for a short time, even if dwelling area was found in and out of enclosure, there were no differences between them, and although duplicate and triplicate enclosure were found, we could not sure which were before and after. Also we could not confirm the type of enclosure with location condition which was the flat land or the top of hill on floodplain. We should not divide the types of enclosure historic site due to differences from cross section of stratum. And I expect that we will have much data such as distribution of enclosure historic site in Yeongnam area where is concerned with origin and diffusion of Japan and China.

• Atmosphere
• /
• v.29 no.1
• /
• pp.105-112
• /
• 2019

Measurements of vertical air motion and microphysics are essential for improving our understanding of convective clouds. In this paper, the author reviews the current research on the retrieval of vertical air motions using the cloud radar. At radar wavelengths of 3 mm (W-band radar; 94-GHz radar; cloud radar), the raindrop backscattering cross-section (${\sigma}b$) varies between successive maxima and minima as a function of the raindrop diameter (D) that are well described by Mie theory. The first Mie minimum in the backscattering cross-section occurs at D~1.68 mm, which translates to a raindrop terminal fall velocity of ${\sim}5.85m\;s^{-1}$ based on the Gunn and Kinzer relationship. Since raindrop diameters often exceed this size, the signal is captured in the radar Doppler spectrum, and thus, the location of the first Mie minimum can be used as a reference for retrieving the vertical air motion. The Mie technique is applied to radar Doppler spectra from the surface-based and airborne, upward pointing W-band radars. The contributions of aircraft motion to the vertical air motion are also described and further the first-order aircraft motion corrected equation is presented. The review also shows that the separate spectral peaks due to the cloud droplets can provide independent validation of the Mie technique retrieved vertical air motion using the cloud droplets as a tracer of vertical air motion.

• The Korean Journal of Franchise Management
• /
• v.12 no.2
• /
• pp.7-21
• /
• 2021

Purpose: One of the characteristics of service companies such as foodservice franchise is that it is easy to imitate, so many brands can imitate the menu that is popular with consumers. Therefore, foodservice franchise company should develop a brand that customers can identify from other brands in order differentiate it from its competitors. In order make the foodservice franchise company identifiable from other brands, it is possible through communication with customers. Therefore, this study proposes a new research model to analyze customer loyalty through online advertising and online word of mouth trust and immersion. Online was provided to customers through a mixture of advertisements and word of mouth, but previous studies have only considered online advertisements or online word of mouth. In addition, we want to verify the difference according to gender, which is an important variable in researching the online information processing behavior of customers. Research design, data, and methodology: The questionnaire of this study was surveyed on 20 years of age or older who have visited the restaurant franchise store within the last 3 months among the foodservice franchise companies operating SNS. During the survey period, 400 surveys were surveyed for a total of 20 days from April 1 to April 20, 2020. Result: The research results are as follows. First, in this study, the effect of online advertisement and online word of mouth on trust and immersion was studied. Second, this study verified the social influence theory in online advertising and online word of mouth. Third, the effect of online advertising and online word of mouth on loyalty according to gender was verified. Fourth, compared to existing advertisements, online advertisements are suitable for marketing by foodservice franchise companies because they can interact with consumers, modify advertisements immediately, execute extensive advertisements at low cost, segment the market, and measure advertisement effectiveness. The recent online expansion has been expanded to mobile-based, allowing foodservice franchisees to provide new communication services such as SMS (Short Message Service), multimedia messaging services, and location-based services. Fifth, a foodservice franchise company can increase brand awareness through online marketing or induce the use of offline stores. Sixth, franchisor can grow into a sustainable company only when they use resources efficiently. Conclusions: Trust is important in foodservice franchise information. This trust has a significant impact on customer commitment and loyalty.