• Korean Journal of Pharmacognosy
• /
• v.30 no.4
• /
• pp.397-403
• /
• 1999

Tyrosinase plays an important role in the process of melanin polymer biosynthesis. Therefore, the enzyme inhibitors have been of great concern as cosmetics to have skin-whitening effects on the local hyperpigmentation. During the search for new inhibitory compounds on melanin polymer biosynthesis from natural sources, MeOH extracts of 589 higher plants were tested for the inhibitory effect on tyrosinase activity by the muschroom tyrosinase assay in vitro. Among plants tested, the leaves of Cercis chinensis exhibited potent inhibitory effect on mushroom tyrosinase activity. Subsequently seven active compounds were isolated from the ethyl acetate soluble part of acetone extract of the leaves of C. chinensis by the activity guided fractionation monitoring the inhibitory effect on tyrosinase activity. Their chemical structures were identified as $kaempferol-3-0-{\alpha}-L-rhamnoside$, quercitrin, $myricetin-3-0-{\alpha}-L-rhamnoside$, myricetin-3-0-(2'-O-galloyl)- ${\alpha}$ -L-rhamopyranoside (desmanthin), (-)-epicatechin-3-0-gallate, (-)-epigallocatechin-3-0-gallate, and methyl gallate on the basis of the speculation of spectral data and chemical reaction. Among the flavonol rhamnosides, myricetin-3-0-(2'-O-galloyl)- -L-rhamnoside(desmanthin) showed most potent inhibitory effect on tyrosinase activity and the structure of B-ring in flavonol moiety was related to the activity. (-)-Epigallocatechin-3-O-gallate having pyrogallol group in flavan-3-ol moiety exhibited more potent inhibitory effect than (-)-epicatechin-3-0-gallate having catechol group in flavan-3-ol moiety on mushroom tyrosinase activity.

• Bulletin of the Korean Mathematical Society
• /
• v.22 no.2
• /
• pp.121-126
• /
• 1985

D.K. Harrison [5] has shown that if R and S are fields of characteristic different from 2, then two Witt rings W(R) and W(S) are isomorphic if and only if W(R)/I(R)$^{3}$ and W(S)/I(S)$^{3}$ are isomorphic where I(R) and I(S) denote the fundamental ideals of W(R) and W(S) respectively. In [1], J.K. Arason and A. Pfister proved a corresponding result when the characteristics of R and S are 2, and, in [9], K.I. Mandelberg proved the result when R and S are commutative semi-local rings having 2 a unit. In this paper, we prove the result when R and S are 2-fold full rings. Throughout this paper, unless otherwise specified, we assume that R is a commutative ring having 2 a unit. A quadratic space (V, B, .phi.) over R is a finitely generated projective R-module V with a symmetric bilinear mapping B: V*V.rarw.R which is nondegenerate (i.e., the natural mapping V.rarw.Ho $m_{R}$ (V, R) induced by B is an isomorphism), and with a quadratic mapping .phi.:V.rarw.R such that B(x,y)=(.phi.(x+y)-.phi.(x)-.phi.(y))/2 and .phi.(rx)= $r^{2}$.phi.(x) for all x, y in V and r in R. We denote the group of multiplicative units of R by U(R). If (V, B, .phi.) is a free rank n quadratic space over R with an orthogonal basis { $x_{1}$, .., $x_{n}$}, we will write < $a_{1}$,.., $a_{n}$> for (V, B, .phi.) where the $a_{i}$=.phi.( $x_{i}$) are in U(R), and denote the space by the table [ $a_{ij}$ ] where $a_{ij}$ =B( $x_{i}$, $x_{j}$). In the case n=2 and B( $x_{1}$, $x_{2}$)=1/2, we reserve the notation [ $a_{11}$, $a_{22}$] for the space.the space.e.e.e.

• Steel and Composite Structures
• /
• v.27 no.5
• /
• pp.577-598
• /
• 2018

The imperfect steel-concrete interface bonding is an important deficiency of the concrete-filled double skin tubular (CFDST) columns that led to separating concrete and steel surfaces under lateral loads and triggering buckling failure of the columns. To improve this issue, it is proposed in this study to use longitudinal and transverse steel stiffeners in CFDST columns. CFDST columns with different patterns of stiffeners embedded in the interior or exterior surfaces of the inner or outer tubes were analyzed under constant axial force and reversed cyclic loading. In the finite element modeling, the confinement effects of both inner and outer tubes on the compressive strength of concrete as well as the effect of discrete crack for concrete fracture were incorporated which give a realistic prediction of the seismic behavior of CFDST columns. Lateral strength, stiffness, ductility and energy absorption are evaluated based on the hysteresis loops. The results indicated that the stiffeners had determinant role on improving pinching behavior resulting from the outer tube's local buckling and opening/closing of the major tensile crack of concrete. The lateral strength, initial stiffness and energy absorption capacity of longitudinally stiffened columns with fixed-free end condition were increased by as much as 17%, 20% and 70%, respectively. The energy dissipation was accentuated up to 107% for fixed-guided end condition. The use of transverse stiffeners at the base of columns increased energy dissipation up to 35%. Axial load ratio, hollow ratio and concrete strength affecting the initial stiffness and lateral strength, had negligible effect of the energy dissipation of the columns. It was also found that the longitudinal stiffeners and transverse stiffeners have, respectively, negative and positive effects on ductility of CFDST columns. The conclusions, drawn from this study, can in turn, lead to the suggestion of some guidelines for the design of CFDST columns.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.9
• /
• pp.3753-3758
• /
• 2015

Background: Polymeric nanoparticles are attractive materials that have been widely used in medicine for drug delivery, with therapeutic applications. In our study, polymeric nanoparticles and the anticancer drug, chrysin, were encapsulated into poly (D, L-lactic-co-glycolic acid) poly (ethylene glycol) (PLGA-PEG) nanoparticles for local treatment. Materials and Methods: PLGA: PEG triblock copolymers were synthesized by ring-opening polymerization of D, L-lactide and glycolide as an initiator. The bulk properties of these copolymers were characterized using 1H nuclear magnetic resonance spectroscopy and Fourier transform infrared spectroscopy. In addition, the resulting particles were characterized by scanning electron microscopy. Results: The chrysin encapsulation efficiency achieved for polymeric nanoparticles was 70% control of release kinetics. The cytotoxicity of different concentration of pure chrysin and chrysin loaded in PLGA-PEG ($5-640{\mu}M$) on T47-D breast cancer cell line was analyzed by MTT-assay. Conclusions: There is potential for use of these nanoparticles for biomedical applications. Future work should include in vivo investigation of the targeting capability and effectiveness of these nanoparticles in the treatment of breast cancer.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.1
• /
• pp.67-75
• /
• 2010

Submarine and deep sea diving structures are generally designed based on their ultimate strength. Fatigue strength at welded joint must be also taken into account because working stress is increased due to the increasing of diving depth and using high yield steel. The pressure hulls of submarine are subjected to fluctuating compressive loading. But in addition to the calculated stresses, high residual tensile stresses at welded part have to be considered. The state of stress level of pressure hull is tensile at surface and compressive at deep diving depth. This paper presents the results of an experimental investigation on the crack initiation and growth at the weld toe of T welded joints of HY-100 steel plate under constant amplitude loading. It is also investigated the phenomenon of the fatigue failure and test methods. Fatigue tests have been using real scaled local structural models of full penetration T-welded joint, which is a part of the cylindrical shell structures reinforced by ring stiffeners. Several load ratios under constant amplitude loading are considered in the tests. Crack initiation and growth characteristics are examined based on the beach marks of the cracked section of the test specimens. A design stress-life curve including the design formula is suggested according to tested data.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.6
• /
• pp.745-753
• /
• 2016

This paper presents a fully synthesizable low power interconnect bus for millimeter-scale wireless sensor nodes. A segmented ring bus topology minimizes the required chip real estate with low input/output pad count for ultra-small form factors. By avoiding the conventional open drain-based solution, the bus can be fully synthesizable. Low power is achieved by obviating a need for local oscillators in member nodes. Also, aggressive power gating allows low-power standby mode with only 53 gates powered on. An integrated wakeup scheme is compatible with a power management unit that has nW standby mode. A 3-module system including the bus is fabricated in a 180 nm process. The entire system consumes 8 nW in standby mode, and the bus achieves 17.5 pJ/bit/chip.

• Korean Journal of Bronchoesophagology
• /
• v.1 no.1
• /
• pp.136-141
• /
• 1995

Tracheostomal stenosis after total laryngectomy is a distressing complication which con-tributes significantly to both psychosocial and physical morbidity according to nature and severity in laryngectomee. Sternal stenosis will compromise not only optimal air exchange, crust formation but also the ability to clear tracheobronchial secretion, so pneumonia and atelectasis will develop. Having a number of procedure recommended for correction of such stenosis with limited results. We developed new technique which is based on tracheal advancement flap had been ap-plied to 12 patients, successfully. We think that total or partial tracheal advancement flap technique Is useful for widening the stoma and advantages of this method are following. 1. Simple technique. possible under local anesthesia 2. Healthy tracheal ring facilities width control 3. Less chance of refractory scar stenosis 4. Tracheoesophageal shunt can be constructed after the partial advancement flap.

• Journal of the Korean Society for Railway
• /
• v.18 no.1
• /
• pp.25-32
• /
• 2015

It has been subject to question whether a conventional traffic signal controller can support efficient operation at grade intersections in which vehicles and tram lines cross concurrently. This study proposes a list of functional requirements for a traffic signal controller to support effective operation of trams at such an intersection. The considered details includes the combinations of geometric conditions at which vehicle, bus, and tram lines are aligned, the types of exclusive tram signals, and the combinations of various signal phases, including exclusive tram phases, which are currently undefined in the nation. The results suggest that the controller should be capable of dealing with the NEMA standard overlap relays and a quadruple-ring phase representation scheme.

• Journal of the Korean Chemical Society
• /
• v.47 no.1
• /
• pp.26-30
• /
• 2003

The dinuclear $Ag_2[Phen]_2[S_2P(OPr)_2]_2$(phen=1,10-phenanthroline; Pr=propyl), was prepared by the reaction of bis(dipropyldithiophosphato) silver(I) complex with 1,10-phenanthroline ligand, and its structure was determined by X-ray crystallography. The two dipropyldithiophosphato ligands each bridge two silver atoms to form an eight-membered $Ag_2S_4P_2$ ring, while the 1,10-phenanthroline molecule coordinates to a silver atom to complete the local tetrahedral geometry for the metal ion. The Ag-S bond distances are 2.559(1) and 2.567(1)${\AA}$, and the Ag-N bond distances are 2.366(3) and 2.471(3)${\AA}$.

• Current Applied Physics
• /
• v.18 no.11
• /
• pp.1458-1464
• /
• 2018

An improved method for the preparation of g-$C_3N_4$ is described. Currently, heating (> $400^{\circ}C$) of urea is the common method used for preparing the g-$C_3N_4$. We have found that sonication of melamine in $HNO_3$ solution, followed by washing with anhydrous ethanol, not only reduce the crystallite size of g-$C_3N_4$ but also facilitate intriguing electronic structure and photoluminescence (PL) properties. Moreover, loading of metal (Pt and Ag) nanoparticles, by applying the borohydride reduction method, has resulted in multicolor-emission from g-$C_3N_4$. With the help of PL spectra and local electronic structure study, at C K-edge, N K-edge, Pt L-edge and Ag K-edge by X-ray absorption spectroscopy (XAS), a precise mechanism of tunable luminescence is established. The PL mechanism ascribes the amendments in the transitions, via defect and/or metal states assimilation, between the ${\pi}^*$ states of tris-triazine ring of g-$C_3N_4$ and lone pair states of nitride. It is evidenced that interaction between the C/N 2p and metal 4d/5d orbitals of Ag/Pt has manifested a net detraction in the ${\delta}^*{\rightarrow}LP$ transitions and enhancement in the ${\pi}^*{\rightarrow}LP$ and ${\pi}^*{\rightarrow}{\pi}$ transitions, leading to broad PL spectra from g-$C_3N_4$ organic semiconductor compound.